21317 träffar på

Standard · ASTM ASTM D1002 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) 1.1 This test method covers the determination of the apparent shear strengths of adhesives for bonding metals when tested on a standard single-lap-joint specimen and under specified conditions of p... Språk Publicerad 2005-10-01 Upphävd 2010-10-01

PDF · 533 SEK

Standard · ASTM ASTM D1076 Standard Specification for Rubber-Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex 1.1 This specification covers requirements for first grade concentrated natural rubber latex (see Table 1) of the following categories:Category 1-Centrifuged Hevea natural latex preserved with ammo... Språk Publicerad 2006-06-01 Upphävd 2010-10-01

PDF · 611 SEK

Standard · ASTM ASTM D1133 Standard Test Method for Kauri-Butanol Value of Hydrocarbon Solvents 1.1 This test method covers the determination of the relative solvent power of hydrocarbon solvents used in paint and lacquer formulations. This test method is suitable for use with solve... Språk Publicerad 2009-06-01 Upphävd 2010-12-01

PDF · 468 SEK

Standard · ASTM ASTM D1203 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods 1.1 These test methods cover the determination of volatile loss from a plastic material under defined conditions of time and temperature, using activated carbon as the immersion medium.1.2 Two test... Språk Publicerad 2003-07-10 Upphävd 2010-11-01

PDF · 468 SEK

Standard · ASTM ASTM D1292 Standard Test Method for Odor in Water 1.1 This test method covers the determination of the odor (that is, the property that affects the sense of smell) of water. A suggested system for classifying odors is given as Annex A1. The test ... Språk Publicerad 2005-02-01 Upphävd 2010-11-01

PDF · 533 SEK

Standard · ASTM ASTM D1337 Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength 1.1 This practice covers a means by which the storage life of an adhesive can be measured using viscosity and adhesive performance testing.1.2 The values stated in SI units are to be regarded as th... Språk Publicerad 2004-04-01 Upphävd 2010-11-01

PDF · 468 SEK

Standard · ASTM ASTM D1430 Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics 1.1 This classification system covers polychlorotrifluoroethylene (PCTFE) plastics that consist of at least 90 % chlorotrifluoroethylene and are suitable for extrusion and for compression and injec... Språk Publicerad 2008-04-01 Upphävd 2010-11-01

PDF · 533 SEK

Standard · ASTM ASTM D1517 Standard Terminology Relating to Leather - Språk Publicerad 2007-01-11 Upphävd 2010-10-01

PDF · 533 SEK

Standard · ASTM ASTM D1558 Standard Test Method for Moisture Content Penetration Resistance Relationships of Fine-Grained Soils 1.1 This test method is for establishing the moisture-penetration resistance relationships of fine-grained soils as determined by the soil penetrometer. 1.2 The values stated in inch-pound units a... Språk Publicerad 2004-07-01 Upphävd 2010-10-01

PDF · 468 SEK

Standard · ASTM ASTM D1619 Standard Test Methods for Carbon Black&#x2014;Sulfur Content 1.1 These test methods cover the determination of the sulfur content of carbon black. The following test methods are included: <td align="left" valign="t Språk Publicerad 2008-08-01 Upphävd 2010-11-01

PDF · 468 SEK

Standard · ASTM ASTM D1631 Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method 1.1 This test method covers the determination of water in phenol and related materials such as cresols, xylenols, naphthalene, pyridine, and quinoline.1.2 This test method has been found applicable... Språk Publicerad 2004-08-01 Upphävd 2010-01-01

PDF · 468 SEK

Standard · ASTM ASTM D1686 Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale) 1.1 This test method covers the visual measurement of the color of thermally stable solids melting below 150oC. It is applicable only to materials in which the color-producing bodies present have l... Språk Publicerad 2004-06-01 Upphävd 2010-01-01

PDF · 468 SEK

Standard · ASTM ASTM D1748 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet 1.1 This test method covers the evaluation of the rust-preventive properties of metal preservatives under conditions of high humidity. 1.2 The values stated in SI units are to be regarded as the st... Språk Publicerad 2008-05-01 Upphävd 2010-10-01

PDF · 533 SEK

Standard · ASTM ASTM D1765 Standard Classification System for Carbon Blacks Used in Rubber Products 1.1 This classification system covers the classification of rubber-grade carbon blacks by the use of a four-character nomenclature system. The first character gives some indication of the influence... Språk Publicerad 2006-08-01 Upphävd 2010-01-01

PDF · 468 SEK

Standard · ASTM ASTM D1786 Standard Specification for Toluene Diisocyanate 1.1 This specification covers toluene diisocyanate used as an ingredient in the production of polyurethane cellular materials. The properties included in this specification are those required to ch... Språk Publicerad 2006-03-15 Upphävd 2010-01-15

PDF · 468 SEK

Standard · ASTM ASTM D2068 Standard Test Method for Determining Filter Blocking Tendency 1.1 This test method covers three procedures for the determination of the filter blocking tendency (FBT) and filterability of middle distillate fuel oils and liquid fuels such as biodiesel and biod... Språk Publicerad 2008-11-05 Upphävd 2010-10-01

PDF · 533 SEK

Standard · ASTM ASTM D2137 Standard Test Methods for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics 1.1 These test methods cover the determination of the lowest temperature at which rubber vulcanizates and rubber- coated fabrics will not exhibit fractures or coating cracks when subjected to speci... Språk Publicerad 2005-10-01 Upphävd 2010-10-01

PDF · 533 SEK

Standard · ASTM ASTM D2161 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity 1.1 This practice covers the conversion tables and equations for converting kinematic viscosity in mm2/s at any temperature to Saybolt Universal viscosity in Saybolt Universal seconds (SUS) at the ... Språk Publicerad 2005-04-01 Upphävd 2010-10-01

PDF · 767 SEK

Standard · ASTM ASTM D2229 Standard Test Method for Adhesion Between Steel Tire Cords and Rubber 1.1 This test method covers the determination of the force required to pull a steel cord from a block of vulcanized rubber.1.2 Although designed primarily for steel cord, this test method may be ap... Språk Publicerad 2004-10-01 Upphävd 2010-01-01

PDF · 533 SEK

Standard · ASTM ASTM D2234/D2234M Standard Practice for Collection of a Gross Sample of Coal 1.1 This practice covers procedures for the collection of a sample under various conditions of sampling. The sample is to be crushed and further prepared for analysis in accordance with Practice D ... Språk Publicerad 2009-05-15 Upphävd 2010-01-01

PDF · 533 SEK

Standard · ASTM ASTM D2304 Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials 1.1 This test method provides procedures for evaluating the thermal endurance of rigid electrical insulating materials. Dielectric strength, flexural strength, or water absorption are determined at... Språk Publicerad 1997-09-10 Upphävd 2010-10-01

PDF · 533 SEK

Standard · ASTM ASTM D2305 Standard Test Methods for Polymeric Films Used for Electrical Insulation 1.1 These test methods cover the testing of homogeneous organic polymer films not over 2.4 mm (95 mils) thick that are to be used for electrical insulation.1.2 These test methods are not necessaril... Språk Publicerad 2002-03-10 Upphävd 2010-10-01

PDF · 533 SEK

Standard · ASTM ASTM D2487 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) 1.1 This practice describes a system for classifying mineral and organo-mineral soils for engineering purposes based on laboratory determination of particle-size characteristics, liquid limit, and ... Språk Publicerad 2006-05-01 Upphävd 2010-01-01

PDF · 611 SEK

Standard · ASTM ASTM D2570 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants 1.1 This test method evaluates the effect of a circulating engine coolant on metal test specimens and automotive cooling system components under controlled, essentially isothermal laboratory condit... Språk Publicerad 2008-10-01 Upphävd 2010-12-01

PDF · 533 SEK

Standard · ASTM ASTM D6086 Standard Test Method for Carbon Black—Void Volume (VV) 1.1 This test method covers a procedure to measure a carbon black structure property known as Void Volume. Compressed void volumes are obtained by measuring the compressed volume of a weighed sampl... Språk Publicerad 2008-11-05 Upphävd 2009-07-01

PDF · 468 SEK

Standard · ASTM ASTM A681 Standard Specification for Tool Steels Alloy 1.1 This specification covers the chemical, mechanical, and physical requirements for available wrought alloy tool steel products. 1.2 These products, which include hot or cold finished bar, plate,... Språk Publicerad 2007-10-10 Upphävd 2007-09-01

PDF · 611 SEK

Standard · ASTM ASTM A105/A105M Standard Specification for Carbon Steel Forgings for Piping Applications 1.1 This specification covers forged carbon steel piping components for ambient- and higher-temperature service in pressure systems. Included are flanges, fittings, valves, and similar parts ord... Språk Publicerad 2009-07-01 Upphävd 2010-12-01

PDF · 533 SEK

Standard · ASTM ASTM F395 Standard Terminology Relating to Vacuum Cleaners - Språk Publicerad 2007-09-01 Upphävd 2010-04-01

PDF · 468 SEK

Standard · ASTM ASTM D2665 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings 1.1 This specification covers requirements and test methods for materials, dimensions and tolerances, pipe stiffness, crush resistance, impact resistance, and solvent cement for poly(vinyl chloride... Språk Publicerad 2009-03-01 Upphävd 2010-12-01

PDF · 533 SEK

Standard · ASTM ASTM D2699 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel 1.1 This laboratory test method covers the quantitative determination of the knock rating of liquid spark-ignition engine fuel in terms of Research O.N., except that this test method may not be app... Språk Publicerad 2008-05-01 Upphävd 2010-10-01

PDF · 858 SEK

• < Föregående
• 258
• 259
• 260
• 261
• 262
• 263
• 264
• 265
• 266
• 267
• Nästa >