21331 träffar på

ASTM D6120
Standard · ASTM ASTM D6120

Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature

1.1 This test method covers the determination of the electrical resistivity at room temperature of solid cylindrical specimens cored from commercial sized carbon anodes and cathode

Språk

Publicerad

2007-09-05
PDF · 468 SEK
ASTM E594
Standard · ASTM ASTM E594

Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography

1.1 This practice covers the testing of the performance of a flame ionization detector (FID) used as the detection component of a gas or supercritical fluid (SF) chromatographic system. 1.2 This r...

Språk

Publicerad

2006-03-01
PDF · 533 SEK
ASTM D1159
Standard · ASTM ASTM D1159

Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration

1.1 This test method covers the determination of the bromine number of the following materials: 1.1.1 Petroleum distillates that are substantially free of material lighter than isobutane and that ...

Språk

Publicerad

2007-09-05
PDF · 533 SEK
ASTM D4031
Standard · ASTM ASTM D4031

Standard Test Method for Bulk Properties of Textured Yarns

1.1 This test method covers the measurement of the change in length of a tensioned skein of textured yarn due to change in crimp characteristics brought about by exposure to wet or dry heat. The ch...

Språk

Publicerad

2007-01-01
PDF · 533 SEK
ASTM D4508
Standard · ASTM ASTM D4508

Standard Test Method for Chip Impact Strength of Plastics

1.1 The purpose of this test method is to provide an impact test that can be performed on small specimens of plastics of different thicknesses. This test method is especially suited for observing t...

Språk

Publicerad

2010-09-17
PDF · 533 SEK
ASTM E2186
Standard · ASTM ASTM E2186

Standard Guide for Determining DNA Single-Strand Damage in Eukaryotic Cells Using the Comet Assay

1.1 This guide covers the recommended criteria for performing a single-cell gel electrophoresis assay (SCG) or Comet assay for the measurement of DNA single-strand breaks in eukaryotic cells. The C...

Språk

Publicerad

2003-04-10
PDF · 533 SEK
ASTM D5768
Standard · ASTM ASTM D5768

Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids

1.1 This test method covers the Wijs procedure for determination of unsaturation (iodine value) of tall oil fatty acids. 1.2 Iodine value is a measure of the unsaturation of oils and fatty acids ...

Språk

Publicerad

2007-01-11
PDF · 468 SEK
ASTM B690
Standard · ASTM ASTM B690

Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube

1.1 This specification covers iron-nickel-chromium-molybdenum alloys (UNS N08366 and UNS N08367)* cold-finished annealed or hot-finished annealed seamless pipe and tube intended fo This ...

Språk

Publicerad

2007-12-05
PDF · 533 SEK
ASTM E798
Standard · ASTM ASTM E798

Standard Practice for Conducting Irradiations at Accelerator-Based Neutron Sources

1.1 This practice covers procedures for irradiations at accelerator-based neutron sources. The discussion focuses on two types of sources, namely nearly monoenergetic 14-MeV neutrons from the deute...

Språk

Publicerad

1996-01-10
PDF · 611 SEK
ASTM D7511
Standard · ASTM ASTM D7511

Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection

1.1 This method is used for determining total cyanide in drinking and surface waters, as well as domestic and industrial wastes. Cyanide ion (CN-), hydrogen cyanide in water (HCN(aq)), and the cyan...

Språk

Publicerad

2012-02-24
PDF · 533 SEK
ASTM G181
Standard · ASTM ASTM G181

Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions

1.1 This test method covers procedures for conducting laboratory bench-scale friction tests of materials, coatings, and surface treatments intended for use in piston rings and cylinder liners in di...

Språk

Publicerad

2011-06-17
PDF · 533 SEK
ASTM E2170
Standard · ASTM ASTM E2170

Standard Test Method for Determining Anaerobic Biodegradation Potential of Organic Chemicals Under Methanogenic Conditions (Withdrawn 2013)

1.1 This test method covers screening procedures for the determining the biodegradation potential of organic chemicals under methanogenic conditions using an inoculum from anaerobic sewage treatmen...

Språk

Publicerad

2008-02-01

Upphävd

2013-03-19
PDF · 533 SEK
ASTM C992
Standard · ASTM ASTM C992

Standard Specification for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks

1.1 This specification defines criteria for boron-based neutron absorbing material systems used in racks in a pool environment for storage of nuclear light water reactor (LWR) spent-fuel assemblies...

Språk

Publicerad

2011-03-18
PDF · 468 SEK
ASTM D6268
Standard · ASTM ASTM D6268

Standard Practice for Handling, Transportation, and Storage of HFC-125, Pentafluoroethane (C2HF5)

1.1 This practice covers guidance and direction to suppliers, purchasers, and users in the handling, transportation, and storage of HFC-125, pentafluoroethane (C2HF5). 1.2 The values stated in inch-p

Språk

Publicerad

2009-01-01
PDF · 468 SEK
ASTM E2536
Standard · ASTM ASTM E2536

Standard Guide for Assessment of Measurement Uncertainty in Fire Tests

1.1 This guide covers the evaluation and expression of uncertainty of measurements of fire test methods developed and maintained by ASTM International, based on the approach presented in the GUM....

Språk

Publicerad

2009-10-01
PDF · 611 SEK
ASTM C920
Standard · ASTM ASTM C920

Standard Specification for Elastomeric Joint Sealants

1.1 This ASTM specification covers the properties of a cured single- or multicomponent cold-applied elastomeric joint sealant for sealing, caulking, or glazing operations on buildings, plazas, and...

Språk

Publicerad

2011-05-20
PDF · 468 SEK
ASTM F1051
Standard · ASTM ASTM F1051

Standard Test Method for Comparing Multistrike Film Ribbons

1.1 This test method covers information and techniques for evaluating several performance qualities of multistrike film typewriter/printer ribbons on a comparative basis for general office use. It ...

Språk

Publicerad

2009-10-01
PDF · 468 SEK
ASTM D1926
Standard · ASTM ASTM D1926

Standard Test Methods for Carboxyl Content of Cellulose

1.1 These test methods cover the determination of the carboxyl content, or ion-exchange capacity, of cellulose from any source. Two test methods are described, the sodium chloride-sodium bicarbo...

Språk

Publicerad

2006-04-01
PDF · 468 SEK
ASTM C1367
Standard · ASTM ASTM C1367

Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures

1.1 This test method covers a laboratory procedure for determining the heat resistance of sealants. This test method is conducted under dead load in a shear mode. This test method was previously wr...

Språk

Publicerad

2006-09-01
PDF · 468 SEK
ASTM C179
Standard · ASTM ASTM C179

Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens

1.1 This test method covers the determination of the drying shrinkage and of the combined drying and linear change of refractory ramming mixes and plastics. 1.2 The values stated in inch-pound uni...

Språk

Publicerad

2011-11-18
PDF · 468 SEK
ASTM B729
Standard · ASTM ASTM B729

Standard Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and Tube

1.1 This specification covers UNS N08020, UNS N08026, and UNS N08024 seamless, cold-worked or hot finished pipe and tube intended for general corrosive service. 1.2 The values stated in inch-poun...

Språk

Publicerad

2009-10-01
PDF · 468 SEK
ASTM D2007
Standard · ASTM ASTM D2007

Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption C...

1.1 This test method covers a procedure for classifying oil samples of initial boiling point of at least 260°C (500°F) into the hydrocarbon types of polar compounds, a

Språk

Publicerad

2011-09-16
PDF · 533 SEK
ASTM D3555
Standard · ASTM ASTM D3555

Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90 °C Operation

1.1 This specification covers a track-resistant black crosslinked polyethylene insulation, the base polymer which consists substantially of polyethylene or its copolymers. This ins This ...

Språk

Publicerad

2007-11-07
PDF · 468 SEK
ASTM C910
Standard · ASTM ASTM C910

Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants

1.1 This test method determines the bond and cohesion of one-part, elastomeric, solvent release-type sealants after high- and low-temperature aging. 1.2 The subcommittee with jurisdiction is not a...

Språk

Publicerad

2006-01-01
PDF · 468 SEK
ASTM D2549
Standard · ASTM ASTM D2549

Standard Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography

1.1 This test method covers the separation and determination of representative aromatics and nonaromatics fractions from hydrocarbon mixtures that boil between 232 and 538°C (450 and 100...

Språk

Publicerad

2007-09-05
PDF · 533 SEK
ASTM D6293
Standard · ASTM ASTM D6293

Standard Test Method for Oxygenates and Paraffin, Olefin, Naphthene, Aromatic (O-PONA) Hydrocarbon Types in Low-Olefin Spark Ignition Engine Fuels ...

1.1 This test method provides for the quantitative determination of oxygenates, paraffins, olefins, naphthenes, and aromatics in low-olefin spark-ignition engine fuels by multidimensional gas chrom...

Språk

Publicerad

2003-05-10

Upphävd

2009-09-01
PDF · 533 SEK
ASTM D600
Standard · ASTM ASTM D600

Standard Specification for Liquid Paint Driers

1.1 This specification covers liquids for use in paints, varnishes, enamels, and similar organic coatings and are solutions of metallic salts of: This specification covers the general r...

Språk

Publicerad

2007-09-05
PDF · 468 SEK
ASTM D5537
Standard · ASTM ASTM D5537

Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Op...

1.1 This is a fire-test-response standard. 1.2 This test method provides a means to measure the heat released and smoke obscuration by burning the electrical insulating materials contained in elect...

Språk

Publicerad

2010-05-17
PDF · 767 SEK
ASTM A167
Standard · ASTM ASTM A167

Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip

1.1 This specification covers stainless and heat-resisting chromium-nickel steel plate, sheet, and strip. 1.2 The values stated in inch-pound units are to be regarded as the standard. This specif...

Språk

Publicerad

2009-05-01
PDF · 468 SEK
ASTM D4462
Standard · ASTM ASTM D4462

Standard Specification for Zinc Hydroxy Phosphite Pigment

1.1 This specification covers a zinc hydroxy phosphite pigment having the general formula ZnHPO3·[ZnO·2Zn(OH)This specification covers a zinc hydroxy phosphite pigm...

Språk

Publicerad

2002-07-10
PDF · 468 SEK
Förfina din sökning genom att visa:
...som handlar om:

Ämnesområden (0)

Avbryt

Branscher (0)

Avbryt

Syfte (0)

Avbryt

Material (0)

Avbryt
Visa varukorgen Fortsätt handla 0
Varukorgen Stäng
Annonstext