21303 träffar på

ASTM F891
Standard · ASTM ASTM F891

Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core

1.1 This specification covers coextruded poly(vinyl chloride) (PVC) plastic pipe with a cellular core and concentric inner and outer solid layers, and is produced using a multilayer coextrusion die...

Språk

Publicerad

2004-09-01

Upphävd

2007-11-01
PDF · 533 SEK
ASTM D2400
Standard · ASTM ASTM D2400

Standard Specification for Varnished Glass-Polyester Cloth Used for Electrical Insulation

1.1 This specification applies to black and yellow varnished woven cloth and tape for electrical insulation, having as a base fabric poly(ethylene terephthalate) yarns in the warp direction and gla...

Språk

Publicerad

1999-10-10
PDF · 468 SEK
ASTM D2518
Standard · ASTM ASTM D2518

Standard Specification for Woven Glass Fabrics for Electrical Insulation

1.1 This specification applies to straight-cut (as opposed to bias-cut) plain weave greige (unfinished) glass fabric produced from continuous-filament yarns and suitable for use in the production o...

Språk

Publicerad

1999-10-10
PDF · 468 SEK
ASTM E950
Standard · ASTM ASTM E950

Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference

1.1 This test method covers the measurement and recording of the profile of vehicular-traveled surfaces with an accelerometer established inertial reference on a profile-measuring vehicle.1.2 The t...

Språk

Publicerad

2004-12-01
PDF · 533 SEK
ASTM E1448
Standard · ASTM ASTM E1448

Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness

1.1 This practice describes equipment and procedures for the calibration of systems used for measuring vehicular response to pavement roughness. Such systems are referred to as response-type system...

Språk

Publicerad

2004-12-01
PDF · 533 SEK
ASTM E1844
Standard · ASTM ASTM E1844

Standard Specification for A Size 10 x 4-5 Smooth-Tread Friction Test Tire

1.1 This specification covers the general requirements for a smooth-tread standard tire for measuring tire-pavement friction forces. 1.2 The values stated in SI units are to be regarded as the st...

Språk

Publicerad

2004-12-01

Upphävd

2006-12-01
PDF · 468 SEK
ASTM E1857
Standard · ASTM ASTM E1857

Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces

1.1 This guide outlines procedures for the selection and assessment of cleaning techniques for removing soiling and staining from masonry, concrete, and stucco surfaces. Removal of paints, coatings...

Språk

Publicerad

2004-12-01
PDF · 533 SEK
ASTM C1174
Standard · ASTM ASTM C1174

Standard Practice for Prediction of the Long-Term Behavior of Materials, Including Waste Forms, Used in Engineered Barrier Systems (EBS) for Geolog...

1.1 This practice describes test methods and data analyses used to develop models for the prediction of the long-term behavior of materials, such as engineered barrier system (EBS) materials and wa...

Språk

Publicerad

2004-06-01

Upphävd

2007-06-01
PDF · 611 SEK
ASTM D1867
Standard · ASTM ASTM D1867

Standard Specification for Copper-Clad Thermosetting Laminates for Printed Wiring

1.1 This specification covers twelve grades of thermosetting laminate with copper foil bonded to one or both surfaces. These combination forms are intended primarily for use in fabrication of print...

Språk

Publicerad

2001-09-10

Upphävd

2007-05-01
PDF · 533 SEK
ASTM D5262
Standard · ASTM ASTM D5262

Standard Test Method for Evaluating the Unconfined Tension Creep Behavior of Geosynthetics

1.1 This test method is intended for use in determining the unconfined tension creep behavior of geosynthetics at constant temperature when subjected to a sustained tensile loading. This test metho...

Språk

Publicerad

2004-07-01

Upphävd

2006-08-01
PDF · 533 SEK
ASTM D6932
Standard · ASTM ASTM D6932

Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures

1.1 This guide covers the construction of bituminous open-graded friction course plant mixtures. End-use specifications should be adopted to conform to job and user requirements. Where applicable, ...

Språk

Publicerad

2004-08-01
PDF · 468 SEK
ASTM D7064
Standard · ASTM ASTM D7064

Standard Practice for Open-Graded Friction Course (OGFC) Mix Design

1.1 This standard practice covers the mix design of open-graded friction course (OGFC) using the superpave gyratory compactor (SGC) or other suitable forms of compaction. The OGFC mix design is bas...

Språk

Publicerad

2004-08-01
PDF · 533 SEK
ASTM D1907
Standard · ASTM ASTM D1907

Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method

1.1 This test method covers the determination of the linear density of all types of yarn in package form, subject to the limitations of size and stretch given in 1.2 and 1.3. Provision is made for ...

Språk

Publicerad

2001-09-10

Upphävd

2007-01-01
PDF · 533 SEK
ASTM F431
Standard · ASTM ASTM F431

Standard Specification for Air Performance Measurement Plenum Chamber for Vacuum Cleaners

1.1 This specification covers the acceptable details and tolerances for the plenum chamber used in specified air performance measurement tests for vacuum cleaners. 1.2 The plenum chamber is designe...

Språk

Publicerad

2004-08-01
PDF · 611 SEK
ASTM D6963
Standard · ASTM ASTM D6963

Standard Termninology Relating to Sewn Products Automation

1.1 This standard is compilation of all terminology which is related and specific to Sewn Products Automation.1.2 Diagrams and illustration included in this compilation are intended to provide a be...

Språk

Publicerad

2004-07-01
PDF · 468 SEK
ASTM F959M
Standard · ASTM ASTM F959M

Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]

1.1 This specification covers the requirements for compressible-washer-type direct tension indicators capable of indicating the achievement of a specified minimum bolt tension in a structural bolt....

Språk

Publicerad

2004-08-01

Upphävd

2006-11-01
PDF · 533 SEK
ASTM C496/C496M
Standard · ASTM ASTM C496/C496M

Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens

1.1 This test method covers the determination of the splitting tensile strength of cylindrical concrete specimens, such as molded cylinders and drilled cores.1.2 The values stated in either inch-po...

Språk

Publicerad

2004-02-01
PDF · 533 SEK
ASTM C127
Standard · ASTM ASTM C127

Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate

1.1 This test method covers the determination of the average density of a quantity of coarse aggregate particles (not including the volume of voids between the particles), the relative density (spe...

Språk

Publicerad

2004-08-01

Upphävd

2007-08-01
PDF · 533 SEK
ASTM C232
Standard · ASTM ASTM C232

Standard Test Methods for Bleeding of Concrete

1.1 These test methods cover the determination of the relative quantity of mixing water that will bleed from a sample of freshly mixed concrete. Two test methods, that differ primarily in the degre...

Språk

Publicerad

2004-07-01

Upphävd

2007-07-15
PDF · 533 SEK
ASTM C1581
Standard · ASTM ASTM C1581

Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage

1.1 This test method covers the laboratory determination of the age at cracking and induced tensile stress characteristics of mortar or concrete specimens under restrained shrinkage. The procedure ...

Språk

Publicerad

2004-07-01
PDF · 533 SEK
ASTM D4434
Standard · ASTM ASTM D4434

Standard Specification for Poly(Vinyl Chloride) Sheet Roofing

1.1 This specification covers flexible sheet made from poly(vinyl chloride) resin as the primary polymer intended for use in single-ply roofing membranes exposed to the weather. The sheet shall con...

Språk

Publicerad

2004-08-01

Upphävd

2006-12-01
PDF · 468 SEK
ASTM A121
Standard · ASTM ASTM A121

Standard Specification for Metallic-Coated Carbon Steel Barbed Wire

1.1 This specification covers metallic-coated steel barbed wire, consisting of a strand of two wires.1.2 The barbed wire is available with aluminum, zinc, and zinc-5 % aluminum-mischmetal alloy coa...

Språk

Publicerad

2004-05-01

Upphävd

2007-09-01
PDF · 468 SEK
ASTM A896
Standard · ASTM ASTM A896

Standard Practice for Conducting Case Studies on Galvanized Structures

1.1 This practice sets forth the procedures for conducting case studies of galvanized installations. It is intended for structural members and other permanent parts of the installation, such as rai...

Språk

Publicerad

2004-05-01
PDF · 533 SEK
ASTM C172
Standard · ASTM ASTM C172

Standard Practice for Sampling Freshly Mixed Concrete

1.1 This practice covers procedures for obtaining representative samples of fresh concrete as delivered to the project site on which tests are to be performed to determine compliance with quality r...

Språk

Publicerad

2004-06-01

Upphävd

2007-07-15
PDF · 468 SEK
ASTM F1083
Standard · ASTM ASTM F1083

Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures

1.1 This specification covers hot-dipped galvanized welded steel pipe in NPS 1 (Note 1) to NPS 8, inclusive, with nominal (average) wall thickness as given in Table 1 and Table 2. Pipe having other...

Språk

Publicerad

2004-06-01

Upphävd

2007-01-11
PDF · 468 SEK
ASTM D6687
Standard · ASTM ASTM D6687

Standard Guide for Testing Printing Ink Vehicles and Components Thereof

1.1 This guide covers a list of test methods, practices, guides, and specifications that can be used for the testing and evaluation of printing ink vehicles and components thereof (see Table 1).1.2...

Språk

Publicerad

2004-06-01

Upphävd

2007-06-01
PDF · 468 SEK
ASTM C858
Standard · ASTM ASTM C858

Standard Specification for Underground Precast Concrete Utility Structures

1.1 This specification covers the recommended design criteria and manufacturing practices for monolithic or sectional precast concrete utility structures. Concrete pipe and box culverts are not cov...

Språk

Publicerad

2004-04-01

Upphävd

2007-06-01
PDF · 468 SEK
ASTM E1306
Standard · ASTM ASTM E1306

Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition

1.1 This practice covers the preparation of solid samples of reactive and refractory metals and alloys by electric arc remelting. The samples for melting may be in the form of chips, turnings, wire...

Språk

Publicerad

2004-05-01

Upphävd

2007-01-15
PDF · 468 SEK
ASTM E1530
Standard · ASTM ASTM E1530

Standard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique

1.1 This test method covers a steady-state technique for the determination of the resistance to thermal transmission (thermal resistance) of materials in thicknesses of less than 25 mm. For homogen...

Språk

Publicerad

2004-05-01

Upphävd

2006-09-01
PDF · 533 SEK
ASTM C533
Standard · ASTM ASTM C533

Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation

1.1 This specification covers calcium silicate block and pipe thermal insulation for use on surfaces with temperatures between 80 and 1700°F (27 to 927°C), unless otherwise agreed...

Språk

Publicerad

2004-06-01

Upphävd

2007-03-01
PDF · 468 SEK
Förfina din sökning genom att visa:
...som handlar om:

Ämnesområden (0)

Avbryt
  • Gruvdrift och mineraler (0)
  • Maskinsäkerhet (0)
  • Miljö- och hälsoskydd, säkerhet (0)
  • Utrustning för materialhantering (0)

Branscher (0)

Avbryt

Syfte (0)

Avbryt

Material (0)

Avbryt
Visa varukorgen Fortsätt handla 0
Varukorgen Stäng
Annonstext