21327 träffar på

Standard · ASTM ASTM D7252 Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates 1.1 This test method determines the percent by weight of monomeric isomers and total monomer in crude or modified isocyanates. The test method is applicable to methylene-bis-(4-phenylisocyanate) (M... Språk Publicerad 2006-04-01

PDF · 533 SEK

Standard · ASTM ASTM D5370 Standard Specification for Pozzolanic Blended Materials in Construction Applications 1.1 This specification covers pozzolanic blended material for use in construction applications where the properties normally attributed to finely divided mineral admixtures may be desired.1.2 The v... Språk Publicerad 2006-02-01

PDF · 468 SEK

Standard · ASTM ASTM D6427 Standard Practice for Handling, Transportation, and Storage of HFC-236fa, 1,1,1,3,3,3-Hexafluoropropane (CF3CH2CF3) 1.1 This practice covers guidance and direction to suppliers, purchasers, and users in the handling, transportation, and storage of HFC-236fa.1.2 The values stated in SI units are to be regarded as... Språk Publicerad 2004-05-01

PDF · 468 SEK

Standard · ASTM ASTM D6382 Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material 1.1 This practice covers test procedures and conditions that are applicable when Test Methods D 5023, D 5024, D 5026, D 5279, and D 5418 are used for conducting dynamic mechanical analysis of roofi... Språk Publicerad 2005-05-01

PDF · 468 SEK

Standard · ASTM ASTM D5737 Standard Guide for Methods for Measuring Well Discharge 1.1 This guide covers an overview of methods to measure well discharge. This guide is an integral part of a series of standards prepared on the in-situ determination of hydraulic properties of aqui... Språk Publicerad 2006-07-01

PDF · 468 SEK

Standard · ASTM ASTM D5361 Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing 1.1 This practice describes a procedure for removal of a sample of compacted bituminous mixture from a pavement for laboratory testing.1.2 The values stated in SI units are to be regarded as the st... Språk Publicerad 2006-08-01

PDF · 468 SEK

Standard · ASTM ASTM E1859 Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique 1.1 This test method covers the measurement of the longitudinal friction coefficient with a measurement device that imposes braking-slip between a tire and a surface for the full range of braking-s... Språk Publicerad 2006-08-01

PDF · 533 SEK

Standard · ASTM ASTM E2486 Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS) 1.1 This test method covers a procedure for rapidly deforming by impact an EIFS for evaluating the effect of such deformation.1.2 The values stated in SI units are to be regarded as the standard. T... Språk Publicerad 2006-04-01

PDF · 468 SEK

Standard · ASTM ASTM F67 Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) 1.1 This specification covers the chemical, mechanical, and metallurgical requirements for four grades of unalloyed titanium strip, sheet, plate, bar, billet, forging, and wire used for the manufac... Språk Publicerad 2006-01-01

PDF · 533 SEK

Standard · ASTM ASTM F2453/F2453M Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in.2 [3871 mm2] or Less, in Panels or ... 1.1 This specification covers welded wire mesh fence fabric produced from steel wire or metallic-coated steel wire. The metallic-coated fabric may be polymer coated after fabrication.1.2 Welded wir... Språk Publicerad 2005-06-01

PDF · 533 SEK

Standard · ASTM ASTM D4552 Standard Practice for Classifying Hot-Mix Recycling Agents 1.1 This practice covers a standardized method whereby petroleum product additives to be used in hot recycling of asphalt concrete can be identified. The products are classified by viscosity in cen... Språk Publicerad 2004-07-01

PDF · 468 SEK

Standard · ASTM ASTM D6950 Standard Practice for Application of Heat Weldable Atactic Polypropylene (APP) Modified Bituminous Waterproofing Membranes Systems for New Building... 1.1 This practice covers the minimum application recommendations for heat weldable atactic polypropylene (APP) modified bituminous systems used as part of a new horizontal waterproofing system over... Språk Publicerad 2004-07-01

PDF · 468 SEK

Standard · ASTM ASTM D3960 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings 1.1 This practice measures the volatile organic compound (VOC) content of solventborne and waterborne paints and related coatings as determined from the quantity of material released from a sample ... Språk Publicerad 2005-07-01

PDF · 533 SEK

Standard · ASTM ASTM B491/B491M Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications 1.1 This specification covers aluminum and aluminum-alloy extruded round tubes either in coils or straight lengths, for general purpose applications such as refrigeration service, gas lines, oil li... Språk Publicerad 2006-03-15

PDF · 533 SEK

Standard · ASTM ASTM B483/B483M Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Pipe for General Purpose Applications 1.1 This specification covers aluminum and aluminum-alloy drawn tubes in straight lengths and coils for general purpose applications in the alloys (Note 0), and tempers shown in . Coiled tubes are ... Språk Publicerad 2003-04-10

PDF · 533 SEK

Standard · ASTM ASTM E965 Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique p>1.1 This test method describes a procedure for determining the average depth of pavement surface macrotexture (see 3.1) (1) by careful application of a known volume of material on the surface ... Språk Publicerad 2006-08-01

PDF · 468 SEK

Standard · ASTM ASTM C1112 Standard Guide for Application of Radiation Monitors to the Control and Physical Security of Special Nuclear Material 1.1 This guide briefly describes the state-of-the-art of radiation monitors for detecting special nuclear material (SNM) (see ) in order to establish the context in which to write performance stand... Språk Publicerad 2005-06-01

PDF · 533 SEK

Standard · ASTM ASTM E479 Standard Guide for Preparation of a Leak Testing Specification 1.1 This standard is intended as a guide. It enumerates factors to be considered in preparing a definitive specification for maximum permissible gas leakage of a component, device, or system. The g... Språk Publicerad 2006-05-01

PDF · 533 SEK

Standard · ASTM ASTM D5716 Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir 1.1 This test method covers construction and operation of a circular orifice weir for measuring the discharge from a well. This test method is a part of a series of standards prepared on the in sit... Språk Publicerad 2006-09-15

PDF · 533 SEK

Standard · ASTM ASTM D5872 Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitor... 1.1 This guide covers how casing-advancement drilling and sampling procedures may be used for geoenvironmental exploration and installation of subsurface water-quality monitoring devices.1.2 Differ... Språk Publicerad 2006-07-01

PDF · 533 SEK

Standard · ASTM ASTM D4001 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering 1.1 This test method describes the test procedures for determining the weight-average molecular weight Mw of polymers by light scattering. It is applicable to all nonionic homopolymers (linear or ... Språk Publicerad 2006-03-15

PDF · 611 SEK

Standard · ASTM ASTM D4648 Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil 1.1 This test method covers the miniature vane test in very soft to stiff saturated fine-grained clayey soils (Φ = 0). Knowledge of the nature of the soil in which each vane test is to be ... Språk Publicerad 2005-06-01

PDF · 533 SEK

Standard · ASTM ASTM D5781 Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality ... 1.1 This guide covers how dual-wall reverse-circulation drilling may be used for geoenvironmental exploration and installation of subsurface water-quality monitoring devices. Note 1The term reverse... Språk Publicerad 2006-07-01

PDF · 533 SEK

Standard · ASTM ASTM D6880 Standard Specification for Wood Boxes 1.1 This specification covers the fabrication of wood boxes. These wood boxes, when constructed, filled and closed, shall be used for the packing of contents not exceeding 1,000 pounds [454 kg].1.... Språk Publicerad 2005-04-01

PDF · 533 SEK

Standard · ASTM ASTM C1250 Standard Test Method for Nonvolatile Content of Cold Liquid-Applied Elastomeric Waterproofing Membranes 1.1 This test method describes a laboratory procedure for determining the average nonvolatile content for one- or two-component cold liquid-applied elastomeric waterproofing membranes.1.2 The value... Språk Publicerad 2005-07-01

PDF · 468 SEK

Standard · ASTM ASTM D1101 Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use 1.1 These test methods cover an accelerated means of measuring the resistance to delamination of structural laminated wood members intended for exterior service.1.2 These test methods are not inten... Språk Publicerad 2006-03-15

PDF · 468 SEK

Standard · ASTM ASTM C981 Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks 1.1 This guide describes the design of fully adhered built-up bituminous membrane waterproofing systems for plaza deck and promenade construction over occupied spaces of buildings where covered by ... Språk Publicerad 2005-07-01

PDF · 611 SEK

Standard · ASTM ASTM F766 Standard Test Method for Melting Point of Waxes 1.1 This test method covers the determination of the initial and final melting points and recovery point of waxes using a hot stage and microscope.1.2 This standard does not purport to address all ... Språk Publicerad 2005-06-01

PDF · 468 SEK

Standard · ASTM ASTM D6174 Standard Test Method for Inorganic Sulfate in Surfactants by Potentiometric Lead Titration 1.1 This test method describes a potentiometric titration procedure for determining the inorganic sulfate content of surfactants. It is intended for the analysis of -olefin sulfonates, alkane sulfo... Språk Publicerad 2006-02-01

PDF · 533 SEK

Standard · ASTM ASTM D6721 Standard Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry 1.1 This test method covers the determination of total chlorine in coal. Språk Publicerad 2006-04-01

PDF · 468 SEK

• < Föregående
• 202
• 203
• 204
• 205
• 206
• 207
• 208
• 209
• 210
• 211
• Nästa >