21430 träffar på

Standard · ASTM ASTM F50 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of De... 1.1 This practice covers the determination of the particle concentration, by number, and the size distribution of airborne particles in dust-controlled areas and clean rooms, for particles in the s... Språk Publicerad 2008-01-09 Upphävd 2012-04-01

PDF · 533 SEK

Standard · ASTM ASTM F645 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems 1.1 This guide is intended for use in the selection, design, and installation of thermoplastic water systems for use outside buildings. For specific projects, a thorough review of this guide is r... Språk Publicerad 2011-09-16 Upphävd 2012-04-01

PDF · 533 SEK

Standard · ASTM ASTM F857 Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Stationary Rack Type 1.1 This specification covers manually fed, spray-type, stationary rack, automatically controlled, commercial dishwashing machines.1.2 The values stated in inch-pound units are to be regarded as st... Språk Publicerad 2007-09-05 Upphävd 2012-05-01

PDF · 533 SEK

Standard · ASTM ASTM F977 Standard Consumer Safety Specification for Infant Walkers 1.1 This consumer safety specification covers performance requirements, test methods, and marking requirements to promote safe use of the infant walker (see 3.1). 1.2 This consumer safety specific... Språk Publicerad 2011-09-16 Upphävd 2012-05-01

PDF · 611 SEK

Standard · ASTM ASTM F1772 Standard Specification for Climbing Harnesses 1.1 This specification covers climbing harnesses for use in the sports of rock, ice, and snow climbing. It establishes requirements for the testing, performance, and marking of climbing harnesses a... Språk Publicerad 2005-10-01 Upphävd 2012-05-01

PDF · 468 SEK

Standard · ASTM ASTM B643 Standard Specification for Copper-Beryllium Alloy Seamless Tube 1.1 This specification establishes requirements for copper-beryllium alloy seamless tube in straight lengths. Copper Alloy UNS C17200 will be the alloy furnished whenever Specification B 643 is spe... Språk Publicerad 2005-10-01 Upphävd 2012-04-01

PDF · 533 SEK

Standard · ASTM ASTM C76 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe 1.1 This specification covers reinforced concrete pipe intended to be used for the conveyance of sewage, industrial wastes, and storm water, and for the construction of culverts. 1.2 This specif... Språk Publicerad 2011-05-20 Upphävd 2012-05-01

PDF · 611 SEK

Standard · ASTM ASTM C76M Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric) 1.1 This specification covers reinforced concrete pipe intended to be used for the conveyance of sewage, industrial wastes, and storm water, and for the construction of culverts. 1.2 This specifi... Språk Publicerad 2011-05-20 Upphävd 2012-05-01

PDF · 611 SEK

Standard · ASTM ASTM C150/C150M Standard Specification for Portland Cement 1.1 This specification covers ten types of portland cement, as follows (see Note 2): 1.1.1 Type I—For use when the special properties specified for any other t This specification covers t... Språk Publicerad 2011-06-17 Upphävd 2012-04-15

PDF · 533 SEK

Standard · ASTM ASTM C506 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe 1.1 This specification covers reinforced arch-shaped concrete pipe to be used for the conveyance of sewage, industrial wastes, storm water, and for the construction of culverts. 1.2 This specifica... Språk Publicerad 2011-05-20 Upphävd 2012-05-01

PDF · 533 SEK

Standard · ASTM ASTM C506M Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric) 1.1 This specification covers reinforced arch-shaped concrete pipe to be used for the conveyance of sewage, industrial wastes, storm water, and for the construction of culverts. 1.2 This specific... Språk Publicerad 2011-05-20 Upphävd 2012-05-01

PDF · 533 SEK

Standard · ASTM ASTM C507 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe 1.1 This specification covers reinforced elliptically shaped concrete pipe to be used for the conveyance of sewage, industrial wastes, and storm water, and for the construction of culverts. 1.2 Pip... Språk Publicerad 2011-05-20 Upphävd 2012-05-01

PDF · 533 SEK

Standard · ASTM ASTM C507M Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric) 1.1 This specification covers reinforced elliptically shaped concrete pipe to be used for the conveyance of sewage, industrial wastes, storm water, and for the construction of culverts. 1.2 Pipe ... Språk Publicerad 2011-05-20 Upphävd 2012-05-01

PDF · 533 SEK

Standard · ASTM ASTM C655 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe 1.1 This specification covers reinforced concrete pipe designed for specific D-loads and intended to be used for the conveyance of sewage, industrial wastes, and storm water and for the construct... Språk Publicerad 2011-01-15 Upphävd 2012-05-01

PDF · 533 SEK

Standard · ASTM ASTM C655M Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric) 1.1 This specification covers reinforced concrete pipe designed for specific D-loads and intended to be used for the conveyance of sewage, industrial wastes, and storm water and for the construct... Språk Publicerad 2011-03-18 Upphävd 2012-05-01

PDF · 533 SEK

Standard · ASTM ASTM C726 Standard Specification for Mineral Wool Roof Insulation Board 1.1 This specification covers the composition and physical properties of mineral wool insulation board used above structural roof decks in building construction. The mineral wool roof insulation a... Språk Publicerad 2011-10-14 Upphävd 2012-05-01

PDF · 468 SEK

Standard · ASTM ASTM C1044 Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode 1.1 This practice covers the determination of the steady-state heat flow through the meter section of a specimen when a guarded-hot-plate apparatus or thin-heater apparatus is used in the single-si... Språk Publicerad 2007-10-10 Upphävd 2012-03-01

PDF · 533 SEK

Standard · ASTM ASTM D36/D36M Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) 1.1 This test method covers the determination of the softening point of bitumen in the range from 30 to 157°C [86 to 315°F] using the ring-and-ball apparatus immersed Språk Publicerad 2009-12-15 Upphävd 2012-05-01

PDF · 468 SEK

Standard · ASTM ASTM D167 Standard Test Method for Apparent and True Specific Gravity and Porosity of Lump Coke 1.1 This test method covers the determination of apparent specific gravity (Sections to ) and true specific gravity (Sections 2 to 9) of lump coke larger than 25-mm (1-in.) size and calculating po... Språk Publicerad 2004-04-01 Upphävd 2012-02-01

PDF · 468 SEK

Standard · ASTM ASTM D2013/D2013M Standard Practice for Preparing Coal Samples for Analysis 1.1 This practice covers the reduction and division of gross or divided samples, and the preparation of composite samples, up to and including the individual portions for laboratory analysis. 1... Språk Publicerad 2011-09-16 Upphävd 2012-04-01

PDF · 611 SEK

Standard · ASTM ASTM D3180 Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases 1.1 This practice gives formulas to enable analytical data to be expressed on various different bases in common use. Such bases are: as received, dry, equilibrium moisture, dry ash free, and others... Språk Publicerad 2007-09-05 Upphävd 2012-04-01

PDF · 468 SEK

Standard · ASTM ASTM D3302/D3302M Standard Test Method for Total Moisture in Coal 1.1 This test method covers the measurement of the total moisture in coal as it exists at the site, at the time, and under the conditions it is sampled. It is applicable to coals as mined, process... Språk Publicerad 2010-01-01 Upphävd 2012-04-01

PDF · 533 SEK

Standard · ASTM ASTM D6354 Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production 1.1 This sampling guide was developed for carbon cathode blocks used in the production of aluminum, and details procedures for taking test samples from single cathode blocks. It covers equipment an... Språk Publicerad 2008-10-15 Upphävd 2012-04-15

PDF · 468 SEK

Standard · ASTM ASTM D6374 Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure 1.1 This test method covers the determination of the volatile matter produced by pyrolysis or evolved when petroleum coke is subjected to the specific conditions of the test method. 1.2 The interla... Språk Publicerad 2004-11-01 Upphävd 2012-04-15

PDF · 468 SEK

Standard · ASTM ASTM D6560 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products 1.1 This test method covers a procedure for the determination of the heptane insoluble asphaltene content of gas oil, diesel fuel, residual fuel oils, lubricating oil, bitumen, and crude petroleum ... Språk Publicerad 2005-11-01 Upphävd 2012-04-15

PDF · 533 SEK

Standard · ASTM ASTM D7736 Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol 1.1 This test method covers the determination of free acids and glycol esters in ethylene glycol by titration. 1.2 This test method is for used on ethylene glycol used for the manufacture of engine... Språk Publicerad 2012-02-24 Upphävd 2012-04-01

PDF · 468 SEK

Standard · ASTM ASTM E202 Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols 1.1 These test methods cover the chemical and physical analysis of the commonly available grades of ethylene glycol, diethylene glycol, triethylene glycol, propylene glycol, and dipropylene glycol... Språk Publicerad 2010-10-15 Upphävd 2012-04-01

PDF · 611 SEK

Standard · ASTM ASTM E253 Standard Terminology Relating to Sensory Evaluation of Materials and Products - Språk Publicerad 2011-08-25 Upphävd 2012-05-01

PDF · 533 SEK

Standard · ASTM ASTM E411 Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine 1.1 This test method covers the determination of total carbonyl in the range from 0.5 to 50 g calculated as CO.1.2 This test method is intended to be general and does not include steps for sample p... Språk Publicerad 2005-03-01 Upphävd 2012-04-01

PDF · 468 SEK

Standard · ASTM ASTM E557 Standard Guide for The Installation of Operable Partitions 1.1 This guide describes options of intructions recommended to be considered in preparation for, and application and installation of, operable partitions and, to some extent, in the design of the b... Språk Publicerad 2000-09-10 Upphävd 2012-04-01

PDF · 533 SEK

• < Föregående
• 424
• 425
• 426
• 427
• 428
• 429
• 430
• 431
• 432
• 433
• Nästa >