21430 träffar på

Standard · ASTM ASTM C365/C365M Standard Test Method for Flatwise Compressive Properties of Sandwich Cores 1.1 This test method covers the determination of the compressive strength and modulus of sandwich cores. These properties are usually determined for design purposes in a direction normal to the pla... Språk Publicerad 2005-10-01 Upphävd 2011-04-01

PDF · 533 SEK

Standard · ASTM ASTM C366/C366M Standard Test Methods for Measurement of Thickness of Sandwich Cores 1.1 These test methods cover plant manufacturing procedures for measuring the thickness of flat sandwich cores. Permissible core material forms include those with continuous bonding surfaces (such ... Språk Publicerad 2005-04-01 Upphävd 2011-04-01

PDF · 468 SEK

Standard · ASTM ASTM C1126 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation 1.1 This specification covers faced or unfaced, rigid cellular phenolic thermal insulation. Boards shall be faced or unfaced. Tubular forms covered by this standard shall be unfaced. It does not ap... Språk Publicerad 2010-11-01 Upphävd 2011-04-01

PDF · 533 SEK

Standard · ASTM ASTM D1169 Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids 1.1 This test method covers the determination of specific resistance (resistivity) applied to new electrical insulating liquids, as well as to liquids in service, or subsequent to service, in cabl... Språk Publicerad 2009-05-01 Upphävd 2011-05-01

PDF · 533 SEK

Standard · ASTM ASTM D1711 Standard Terminology Relating to Electrical Insulation 1.1 This terminology is a compilation of technical terms used in conjunction with testing and specifying solid electrical and electronic insulating materials in standards under the jurisdiction of ... Språk Publicerad 2008-05-01 Upphävd 2011-04-01

PDF · 533 SEK

Standard · ASTM ASTM D1835 Standard Specification for Liquefied Petroleum (LP) Gases 1.1 This specification covers those products commonly referred to as liquefied petroleum gases, consisting of propane, propene (propylene), butane, and mixtures of these materials. Four basic types... Språk Publicerad 2005-04-01 Upphävd 2011-05-01

PDF · 468 SEK

Standard · ASTM ASTM D2837 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products 1.1 This test method describes two essentially equivalent procedures: one for obtaining a long-term hydrostatic strength category based on stress, referred to herein as the hydrostatic design basis... Språk Publicerad 2008-05-01 Upphävd 2011-04-01

PDF · 611 SEK

Standard · ASTM ASTM D6479 Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints 1.1 This test method covers the procedures for determining the resistance to edgecombing of a woven fabric used in inflatable restraints.1.2 Procedures and apparatus other than those stated in this... Språk Publicerad 2007-09-05 Upphävd 2008-07-01

PDF · 468 SEK

Standard · ASTM ASTM D6479 Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints 1.1 This test method covers the procedures for determining the resistance to edgecombing of a woven fabric used in inflatable restraints.1.2 Procedures and apparatus other than those stated in this... Språk Publicerad 2007-07-01 Upphävd 2008-07-01

PDF · 468 SEK

Standard · ASTM ASTM D6479 Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints 1.1 This test method covers the procedures for determining the resistance to edgecombing of a woven fabric used in inflatable restraints. 1.2 Procedures and apparatus other than those stated in thi... Språk Publicerad 2008-09-03 Upphävd 2011-05-01

PDF · 468 SEK

Standard · ASTM ASTM D7349/D7349M Standard Test Method for Determining the Capability of Roofing and Waterproofing Materials to Seal around Fasteners 1.1 This qualitative test method determines the capability of asphalt-based roofing or waterproofing material to seal around a fastener that penetrates the material and prevent transmission of liqu... Språk Publicerad 2010-08-01 Upphävd 2011-05-01

PDF · 533 SEK

Standard · ASTM ASTM E2544 Standard Terminology for Three-Dimensional (3D) Imaging Systems 1.1 This terminology contains common terms, definitions of terms, descriptions of terms, nomenclature, and acronyms associated with three-dimensional (3D) imaging systems in an effort to standard... Språk Publicerad 2010-07-01 Upphävd 2011-04-01

PDF · 533 SEK

Standard · ASTM ASTM F1137 Standard Specification for Phosphate/Oil and Phosphate/Organic Corrosion Protective Coatings for Fasteners 1.1 This specification covers the basic requirements for seven grades of corrosion protection for fasteners. Grade 0A consists of a zinc phosphate coating with no additional sealer (dry), Grade 0B ... Språk Publicerad 2006-06-01 Upphävd 2011-05-01

PDF · 468 SEK

Standard · ASTM ASTM F1446 Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear 1.1 These test methods cover laboratory equipment, procedures, and basic requirements pertinent to testing protective headgear. Deviations or additions, or both, to these test methods will be speci... Språk Publicerad 2008-06-04 Upphävd 2011-04-01

PDF · 611 SEK

Standard · ASTM ASTM F1473 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins 1.1 This test method determines the resistance of polyethylene materials to slow crack growth under conditions specified within.Note 1This test method is known as PENT (Pennsylvania Notch Test) tes... Språk Publicerad 2007-09-05 Upphävd 2011-05-01

PDF · 533 SEK

Standard · ASTM ASTM F1647 Standard Test Methods for Organic Matter Content of Putting Green and Sports Turf Root Zone Mixes 1.1 These test methods cover the determination of the percent organic matter of a putting green root zone mixture using a loss on ignition method or the Walkley Black method. These test methods ar... Språk Publicerad 2010-05-01 Upphävd 2011-04-01

PDF · 468 SEK

Standard · ASTM ASTM F1815 Standard Test Methods for Saturated Hydraulic Conductivity, Water Retention, Porosity, and Bulk Density of Putting Green and Sports Turf Root Zones 1.1 These test methods cover the measurements of saturated hydraulic conductivity, water retention, porosity (including distribution of capillary and air-filled porosity at a known soil suction), a... Språk Publicerad 2006-11-15 Upphävd 2011-04-01

PDF · 533 SEK

Standard · ASTM ASTM F2040 Standard Specification for Helmets Used for Recreational Snow Sports 1.1 This specification defines performance requirements for helmets used in nonmotorized recreational snow sports (such as skiing, snowboarding, and other alpine sports). This specification is a pe... Språk Publicerad 2006-05-01 Upphävd 2011-04-01

PDF · 468 SEK

Standard · ASTM ASTM F2220 Standard Specification for Headforms 1.1 This standard specifies the materials, sizing, and manufacturing details of test headforms for use in the testing of protective headgear. Details of the exterior dimension of the headforms are ... Språk Publicerad 2009-02-01 Upphävd 2011-04-01

PDF · 533 SEK

Standard · ASTM ASTM F2396 Standard Guide for Construction of High Performance Sand-Based Rootzones for Sports Fields 1.1 This guide covers techniques that are appropriate for the construction of high performance sand-based rootzones for sports fields. This guide provides guidance for the selection of materials, i... Språk Publicerad 2004-12-01 Upphävd 2011-04-01

PDF · 611 SEK

Standard · ASTM ASTM F2437 Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and S... 1.1 This specification covers the requirements for carbon and alloy steel compressible-washer-type direct tension indicators capable of indicating a specified bolt tension in cap screws, bolts, anc... Språk Publicerad 2006-08-15 Upphävd 2011-05-01

PDF · 533 SEK

Standard · ASTM ASTM F2837 Standard Test Method for Hot Compression Properties of Gasket Materials 1.1 This test method covers a means of measuring the hot compression properties of a gasket material by measuring its creep under a constant load at both room temperature and while increasing the t... Språk Publicerad 2010-05-01 Upphävd 2011-04-01

PDF · 468 SEK

Standard · ASTM ASTM G181 Standard Practice for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions 1.1 This practice covers procedures for conducting laboratory bench-scale friction tests of materials, coatings, and surface treatments intended for use in piston rings and cylinder liners in diese... Språk Publicerad 2009-10-01 Upphävd 2011-05-01

PDF · 533 SEK

Standard · ASTM ASTM C870 Standard Practice for Conditioning of Thermal Insulating Materials 1.1 This practice covers the conditioning of thermal insulating materials for tests. Since prior exposure of insulating materials to high or low humidity may affect the equilibrium moisture content... Språk Publicerad 2004-11-01 Upphävd 2011-04-01

PDF · 468 SEK

Standard · ASTM ASTM D883 Standard Terminology Relating to Plastics 1.1 This terminology covers definitions of technical terms used in the plastics industry. Terms that are generally understood or adequately defined in other readily available sources are not includ... Språk Publicerad 2007-09-05 Upphävd 2008-03-01

PDF · 611 SEK

Standard · ASTM ASTM D883 Standard Terminology Relating to Plastics 1.1 This terminology covers definitions of technical terms used in the plastics industry. Terms that are generally understood or adequately defined in other readily available sources are not includ... Språk Publicerad 2008-04-09 Upphävd 2011-05-15

PDF · 611 SEK

Standard · ASTM ASTM D910 Standard Specification for Aviation Gasolines 1.1 This specification is for the use of purchasing agencies in formulating specifications for purchases of aviation gasoline under contract. 1.2 This specification defines specific types of avia... Språk Publicerad 2004-11-01 Upphävd 2006-12-01

PDF · 533 SEK

Standard · ASTM ASTM D910 Standard Specification for Aviation Gasolines 1.1 This specification covers formulating specifications for purchases of aviation gasoline under contract and is intended primarily for use by purchasing agencies.1.2 This specification defines sp... Språk Publicerad 2007-10-10 Upphävd 2011-05-01

PDF · 533 SEK

Standard · ASTM ASTM D2713 Standard Test Method for Dryness of Propane (Valve Freeze Method) 1.1 This test method covers the measurement of the dryness of propane products that do not contain antifreeze agents such as, but not limited to, commercial propane and special duty propane (see Sp... Språk Publicerad 2008-03-12 Upphävd 2011-05-01

PDF · 468 SEK

Standard · ASTM ASTM E119 Standard Test Methods for Fire Tests of Building Construction and Materials 1.1 The test methods described in this fire-test-response standard are applicable to assemblies of masonry units and to composite assemblies of structural materials for buildings, including loadbea... Språk Publicerad 2010-09-17 Upphävd 2011-05-01

PDF · 767 SEK

• < Föregående
• 354
• 355
• 356
• 357
• 358
• 359
• 360
• 361
• 362
• 363
• Nästa >