21320 träffar på

ASTM A974
Standard · ASTM ASTM A974

Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)

1.1 This specification covers gabions and gabion mattresses produced from metallic-coated welded wire fabric, and metallic-coated wire for spiral binders, lacing wire, and stiffeners used to assemb...

Språk

Publicerad

2003-05-10
PDF · 533 SEK
ASTM D7031
Standard · ASTM ASTM D7031

Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products

1.1 This guide covers test methods appropriate for evaluating a wide range of performance properties for wood-plastic composite (WPC) products. It was developed from evaluations of both experimen...

Språk

Publicerad

2011-09-16
PDF · 533 SEK
ASTM E564
Standard · ASTM ASTM E564

Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings

1.1 This practice describes methods for evaluating the shear capacity of a typical section of a framed wall, supported on a rigid foundation and having load applied in the plane of

Språk

Publicerad

2006-01-15
PDF · 533 SEK
ASTM D3175
Standard · ASTM ASTM D3175

Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke

1.1 This test method determines the percentage of gaseous products, exclusive of moisture vapor, in the analysis sample which are released under the specific conditions of the test. 1.2 This test m...

Språk

Publicerad

2011-05-20
PDF · 533 SEK
ASTM F2866
Standard · ASTM ASTM F2866

Standard Test Method for Flammability of a Membrane Switch in Defined Assembly

1.1 This test method covers the determination of the flammability characteristics of a membrane switch. 1.2 This test method defines the MSB rating of a membrane switch. Each character of the ...

Språk

Publicerad

2011-09-16
PDF · 533 SEK
ASTM D3377
Standard · ASTM ASTM D3377

Standard Test Method for Weight Loss of Solventless Varnishes

1.1 This test method covers the determination of the percent weight loss of cured solventless electrical varnishes when exposed to elevated temperatures for prescribed periods of t

Språk

Publicerad

2009-10-01
PDF · 468 SEK
ASTM D6346
Standard · ASTM ASTM D6346

Standard Guide for Accepting, Segregating and Packaging Materials Collected Through Household Hazardous Waste Programs

1.1 This guide covers Household Hazardous Waste (HHW) programs for accepting, segregating and packaging materials collected through HHW programs to minimize the risk associated with managing these...

Språk

Publicerad

1998-12-10
PDF · 468 SEK
ASTM D7155
Standard · ASTM ASTM D7155

Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils

1.1 This practice covers the compatibility of mixtures of turbine lubricating oils of the same ISO VG grade and type as defined by Specification D4304.

Språk

Publicerad

2011-12-16
PDF · 533 SEK
ASTM D4171
Standard · ASTM ASTM D4171

Standard Specification for Fuel System Icing Inhibitors

1.1 This specification covers additives for aviation fuels (see Specifications D910 and This specification covers additives for aviation fuels used to inhibit ice formation in aircraft fuel systems...

Språk

Publicerad

2011-09-16
PDF · 533 SEK
ASTM D4178
Standard · ASTM ASTM D4178

Standard Practice for Calibrating Moisture Analyzers

1.1 This practice covers a calibration technique based on the preparation of standards of known water content. This technique is applicable to the production of standards between 20 and 2000 cm3/m...

Språk

Publicerad

2005-11-01
PDF · 468 SEK
ASTM A336/A336M
Standard · ASTM ASTM A336/A336M

Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts

1.1 This specification covers ferritic steel forgings for boilers, pressure vessels, high-temperature parts, and associated equipment. 1.2 Forgings made of steel grades listed in Specification Th...

Språk

Publicerad

2010-06-18
PDF · 533 SEK
ASTM D6445
Standard · ASTM ASTM D6445

Standard Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry (Withdrawn 2009)

1.1 This test method covers the measurement of sulfur in nonleaded gasoline and gasoline-oxygenate blends. The applicable concentration range is 48 to 1000 mg/kg sulfur. 1.2 The values stated in SI...

Språk

Publicerad

2004-05-01

Upphävd

2009-09-01
PDF · 533 SEK
ASTM E1194
Standard · ASTM ASTM E1194

Standard Test Method for Vapor Pressure (Withdrawn 2013)

1.1 This test method describes procedures for measuring the vapor pressure of pure liquid or solid compounds. Since no single technique is available to measure vapor pressures from 1 X 10-11 to 100...

Språk

Publicerad

2007-11-07

Upphävd

2013-03-15
PDF · 533 SEK
ASTM C1618
Standard · ASTM ASTM C1618

Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure

1.1&#x00a0;This test method covers procedures for testing of precast concrete pipe sections, prior to delivery, where maximum field leakage rates are specified. <div class="Sec

Språk

Publicerad

2005-05-01
PDF · 468 SEK
ASTM B99/B99M
Standard · ASTM ASTM B99/B99M

Standard Specification for Copper-Silicon Alloy Wire for General Applications

1.1 This specification establishes the requirements for round, rectangular, and square wire for general applications other than for electrical transmission cable. The alloys involved are UNS Nos. C...

Språk

Publicerad

2011-12-16
PDF · 468 SEK
ASTM F1802
Standard · ASTM ASTM F1802

Standard Test Method for Performance Testing of Excess Flow Valves

1.1 This test method covers a standardized method to determine the performance of excess flow valves (EFVs) designed to limit flow or stop flow in thermoplastic natural gas service lines. 1.2 All...

Språk

Publicerad

2004-04-01
PDF · 533 SEK
ASTM D4844
Standard · ASTM ASTM D4844

Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection

1.1 This guide is intended to provide a standardized approach for establishing and carrying out an air monitoring program to protect workers at waste management facilities. This guide may apply to ...

Språk

Publicerad

2003-03-10
PDF · 533 SEK
ASTM D2028/D2028M
Standard · ASTM ASTM D2028/D2028M

Standard Specification for Cutback Asphalt (Rapid-Curing Type)

1.1 This specification covers cutback petroleum asphalts of the rapid-curing type for use in the construction and treatment of pavements. 1.2 The values stated in either SI units or inch-pound unit...

Språk

Publicerad

2010-06-01
PDF · 468 SEK
ASTM E2128
Standard · ASTM ASTM E2128

Standard Guide for Evaluating Water Leakage of Building Walls

1.1 This guide describes methods for determining and evaluating causes of water leakage of exterior walls. For this purpose, water penetration is considered leakage, and therefore problematic, if i...

Språk

Publicerad

2012-03-23
PDF · 767 SEK
ASTM E2327
Standard · ASTM ASTM E2327

Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis

1.1 This practice covers quality assurance issues in forensic laboratories performing seized-drug analysis including evidence handling, analytical procedures, report writing, method validation, doc...

Språk

Publicerad

2011-05-20
PDF · 533 SEK
ASTM C1296
Standard · ASTM ASTM C1296

Standard Test Method for Determination of Sulfur in Uranium Oxides and Uranyl Nitrate Solutions by X-Ray Fluorescence (XRF) (Withdrawn 2007)

1.1 This test method covers the sample preparation and analysis by X-ray fluorescence (XRF) of sulfur in uranium oxides and uranyl nitrate solutions.1.2 This test method is valid for those solution...

Språk

Publicerad

2001-01-01

Upphävd

2007-07-26
PDF · 468 SEK
ASTM D3376
Standard · ASTM ASTM D3376

Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation

1.1 These test methods cover the sampling and testing of cellulosic pulps for use in the manufacture of electrical insulating papers and boards or in the direct application of pulp fibers as insul...

Språk

Publicerad

2009-10-01
PDF · 533 SEK
ASTM E969
Standard · ASTM ASTM E969

Standard Specification for Glass Volumetric (Transfer) Pipets

1.1&#x00a0;This specification covers volumetric pipets of two classes. Class A, Precision Pipet and Class B, General Purpose. This specification covers volumetric pipets of two classes. Class A...

Språk

Publicerad

2002-10-10
PDF · 468 SEK
ASTM D4767
Standard · ASTM ASTM D4767

Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils

1.1 This test method covers the determination of strength and stress-strain relationships of a cylindrical specimen of either an intact, reconstituted, or remolded saturated cohesive soil. Specimen...

Språk

Publicerad

2011-05-20
PDF · 611 SEK
ASTM F97
Standard · ASTM ASTM F97

Standard Practices for Determining Hermeticity of Electron Devices by Dye Penetration (Withdrawn 2008)

1.1 These practices cover procedures that will normally detect and locate the sites of gross leaks in electron devices.1.2 These procedures are suitable for use on selected parts during receiving i...

Språk

Publicerad

2002-12-10

Upphävd

2008-07-30
PDF · 468 SEK
ASTM B602
Standard · ASTM ASTM B602

Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings

1.1 This test method gives sampling plans that are intended for use in the inspection of metallic and inorganic coatings for conformance to ASTM standard specifications. 1.2 The plans in this test...

Språk

Publicerad

2005-05-15
PDF · 533 SEK
ASTM D4486
Standard · ASTM ASTM D4486

Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids

1.1 This test method covers the measurement of kinematic viscosity of transparent, Newtonian liquids which because of their reactivity, instability, or volatility cannot be used in conventional cap...

Språk

Publicerad

2011-04-15
PDF · 533 SEK
ASTM F1112
Standard · ASTM ASTM F1112

Standard Test Method for Static Testing of Tubeless Pneumatic Tires for Rate of Loss of Inflation Pressure

1.1 This test method covers the determination of the rate of inflation pressure loss resulting from air diffusion through the structures of tubeless tires under constant temperature conditions. The...

Språk

Publicerad

2006-07-01
PDF · 533 SEK
ASTM D1882
Standard · ASTM ASTM D1882

Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles

1.1&#x00a0;This test method determines the effect of cooling system chemical solutions on organic finishes used on motor vehicles. Cooling system chemicals include: coolants or corrosion

Språk

Publicerad

1996-04-10
PDF · 468 SEK
ASTM D4575
Standard · ASTM ASTM D4575

Standard Test Methods for Rubber Deterioration&#8212;Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers

1.1 These test methods cover the following three types of methods for the determination of ozone content in laboratory test chambers. Method A (UV absorption) is specified for reference or referee ...

Språk

Publicerad

2009-07-01
PDF · 533 SEK
Förfina din sökning genom att visa:
...som handlar om:

Ämnesområden (0)

Avbryt

Branscher (0)

Avbryt

Syfte (0)

Avbryt

Material (0)

Avbryt
Visa varukorgen Fortsätt handla 0
Varukorgen Stäng
Annonstext