1.1 This test method covers the determination of the electrical performance of a photovoltaic cell under simulated sunlight by means of a calibrated reference cell procedure. 1.2 Electrical perf...
2009-04-01
1.1 This specification covers the requirements for fully-formulated glycol base coolants for cooling systems of heavy-duty engines. When concentrates are used at 40 to 60 % glycol concentration by ...
2011-04-15
1.1 This specification covers zinc and zinc alloy jumbo, block, and half block ingot meeting dimensional requirements. 1.2 The values stated in inch-pound units are to be regarded as standard. The ...
2010-05-17
1.1 This guide covers the basic tests which shall be conducted on amusement rides and devices during prototype development, installation or erection, following major modifications, and during norma...
2003-10-01
1.1 This test method covers the use of the subthreshold charge separation technique for analysis of ionizing radiation degradation of a gate dielectric in a metal-oxide-semiconductor-field-effect t...
2011-05-20
1.1 This fire-test-response test method measures the performance of joint systems designed to be used with fire rated floors and walls during a fire endurance test exposure. The fire endurance tes...
2007-10-10
1.1 This practice covers the means of estimating the period of time during which a water sample can be stored after collection and preservation without significantly affecting the
2008-07-15
1.1 This practice describes the preparation of disk specimens of steel and iron by melting chunks, chips, drillings, turnings, wire, or powder briquets with an electric arc in an argon atmosphe...
2009-10-01
1.1 This test method covers the determination of the electrical resistivity of a conductive material as used in the manufacture of a membrane switch. 1.2 This test method is not suitable for measur...
2010-09-17
1.1 These test methods cover the determination of (1) the resistance to deformation of compacted bituminous mixtures by measuring the lateral pressure developed when applying a vertical load by me...
1.1 This specification covers the chemical, mechanical, and dimensional requirements for metric hardened steel washers for use with fasteners having nominal thread diameters M12 through M100. Thes...
2012-02-24
1.1 This test method covers the determination of methanol, ethanol, tert-butanol, methyl tert-butyl ether (MTBE), ethyl tert-butyl ether (ETBE), <span clas
2007-02-07
1.1 This test method of drop shatter test2 covers the determination of the relative size stab
2007-11-07
1.1 These test methods cover two procedures for measuring the consistency of small samples of lubricating greases by penetration of a ¼-scale cone or a ½-scale cone. Th
1.1 The ASTM Butadiene Measurement Tables are for use in the calculation of quantities of butadiene. The accompanying Tables 1-4 cover the normal operating ranges for the reduction of observed spec...
2005-11-01
1.1 This specification covers brick intended for use as a paving material in areas with a high volume of heavy vehicular traffic. The units are designed for use in such places as streets, commerc...
2011-09-16
1.1 This practice covers the procedures necessary to follow for measuring resistance-to-earth of the running rails which are used as the conductors for returning the train operating current to the ...
2005-05-01
DESIG: E 263 09 ^TITLE: Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Iron ^SIGNUSE: Refer to Guide E 844 for guidance on the selection, irradiation, and...
2009-06-01
1.1 This guide deals primarily with the terms and relationships used in supercritical fluid chromatography. 1.2 Since many of the basic terms and definitions also apply to gas chromatography and li...
2006-09-01
1.1 This test method covers evaluation of the maximum static puncture load that roofing membrane samples can withstand without allowing the passage of water. 1.2 This laboratory test is conducted a...
1.1 This test method is designed to evaluate the effectiveness of water-repellent compositions for retarding dimensional changes in coated wood submerged in water. It can also be u
2008-11-05
1.1 This test method covers the determination of basic constituents in petroleum products by titration with perchloric acid in glacial acetic acid. 1.2 Procedures A and B use different titration...
1.1 This specification covers refined rhodium as sponge and powder in three grades as follows: 1.1.1 Grade 99.80—Rhodium having a purity of 99.80 %, This specification covers refined rh...
2006-06-01
1.1 This guide describes the recommended standard substrates and their recommended surface preparation for use in standard tests of building seals and sealants. 1.2 This standard does not purport to a
2005-09-01
1.1 This guide covers sampling equipment and procedures and “in the field” preservation, and it does not include well location, depth, well development, design and co
2001-08-10
1.1 This specification covers polyvinyl chloride and other conforming organic polymer-coated steel chain-link fabric, coated before weaving. Polyvinyl chloride, polyolefin, and other organic polyme...
1.1 This test method covers the determination of total oxygen demand in the range from 100 to 100 000 mg/L, in water and wastewater including brackish waters and brines (see 6.5). Larger concentrat...
1998-03-10
1.1 This test method covers the determination of nonvolatile content or total solids of liquid phenol, resorcinol, and melamine adhesives with or without hardener (Note 1) added and containing high...
2004-04-01
1.1 This test method describes the use of the M.I.T.-type folding apparatus for determining folding endurance of paper. The M.I.T. tester can be adjusted for papers of any thickness; however, if th...
2007-09-05
2010-05-01
1.1 This specification covers the chemical and mechanical requirements for stainless steel and nickel alloy bolts, hex cap screws, and studs, ¼ in. diameter and larger, intended for use ...
2004-11-01