21324 träffar på

Standard · ASTM ASTM D7112

Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical De...

1.1 This test method covers an automated procedure involving titration and optical detection of precipitated asphaltenes for determining the stability and compatibility parameters of refinery resid...

Språk

Publicerad

2009-12-01

Upphävd

2012-11-01

PDF · 611 SEK

Standard · ASTM ASTM D7157

Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase S...

1.1 This test method covers a procedure for quantifying the intrinsic stability of the asphaltenes in an oil by an automatic instrument using an optical device. 1.2 This test method is applicable...

Språk

Publicerad

2009-06-01

Upphävd

2012-11-01

PDF · 533 SEK

Standard · ASTM ASTM E975

Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation

1.1 This practice covers the determination of retained austenite phase in steel using integrated intensities (area under peak above background) of X-ray diffraction peaks using chromium K<span ...

Språk

Publicerad

2008-06-01

Upphävd

2013-02-15

PDF · 533 SEK

Standard · ASTM ASTM G5

Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements

1.1 This test method covers an experimental procedure for checking experimental technique and instrumentation. If followed, this test method will provide repeatable potentiostatic and potentiodynam...

Språk

Publicerad

2004-11-01

Upphävd

2013-02-01

PDF · 611 SEK

Standard · ASTM ASTM G202

Standard Test Method for Using Atmospheric Pressure Rotating Cage

1.1 This test method covers a generally accepted procedure to conduct the rotating cage (RC) experiment under atmospheric pressure. 1.2 The values stated in SI units are to be regarded as the stand...

Språk

Publicerad

2009-10-01

Upphävd

2012-11-01

PDF · 533 SEK

Standard · ASTM ASTM F2023

Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water

1.1 This test method describes the general requirements for evaluating the long-term, chlorinated water, oxidative resistance of cross-linked polyethylene (PEX) tubing produced in accordance with S...

Språk

Publicerad

2008-05-14

Upphävd

2010-08-01

PDF · 533 SEK

Standard · ASTM ASTM F2160

Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)

1.1 This specification covers material, dimensional, workmanship and performance requirements for polyethylene conduit, duct and innerduct manufactured for use in a non- pressure application with c...

Språk

Publicerad

2008-04-09

Upphävd

2010-04-01

PDF · 533 SEK

Standard · ASTM ASTM F2389

Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems

1.1 This specification establishes requirements for polypropylene (PP) piping system components made to metric sizes and IPS schedule 80 sizes, and pressure rated for water service and distribution...

Språk

Publicerad

2007-09-05

Upphävd

2010-02-01

PDF · 533 SEK

Standard · ASTM ASTM B673

Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe

1.1 This specification covers UNS N08925, UNS N08354, and UNS N08926* welded pipe for general corrosion applications. 1.2 This specification covers pipe sizes in schedules shown in Table 1. 1.3...

Språk

Publicerad

2012-05-01

PDF · 468 SEK

Standard · ASTM ASTM F2330

Standard Test Method for Evaluating the Oxidative Resistance of Multilayer Polyolefin Tubing to Hot Chlorinated Water

1.1 This test method describes the general requirements for evaluating the long-term, chlorinated water, oxidative resistance of multilayer tubing which includes an inner layer of a polyolefin mate...

Språk

Publicerad

2004-01-01

Upphävd

2010-01-01

PDF · 533 SEK

Standard · ASTM ASTM F2769

Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems

1.1 This specification establishes requirements for polyethylene of raised temperature (PE-RT) plastic hot- and cold-water tubing and distribution systems components made in one standard dimension ...

Språk

Publicerad

2009-06-15

Upphävd

2010-08-01

PDF · 533 SEK

Standard · ASTM ASTM G7

Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials

1.1 This practice covers procedures to be followed for direct exposure of nonmetallic materials to the environment. When originators of a weathering test have the actual exposure conducted by a sep...

Språk

Publicerad

2005-01-01

Upphävd

2011-06-01

PDF · 533 SEK

Standard · ASTM ASTM F690

Standard Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems

1.1 This practice covers general and basic procedures related to the proper installation of thermoplastic, flexible, pressure piping, 36 in. nominal size and smaller, for underground irrigation sys...

Språk

Publicerad

2003-08-10

Upphävd

2012-01-01

PDF · 533 SEK

Standard · ASTM ASTM F656

Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings

1.1 This specification covers requirements for primers for use with poly(vinyl chloride) (PVC) pipe and fittings that are to be joined by PVC solvent cements meeting the requirements of Specificati...

Språk

Publicerad

2008-11-05

Upphävd

2010-08-01

PDF · 468 SEK

Standard · ASTM ASTM G151

Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources

1.1 This practice provides general procedures to be used when exposing nonmetallic materials in accelerated test devices that use laboratory light sources. Detailed information regarding procedures...

Språk

Publicerad

2009-07-01

Upphävd

2010-04-01

PDF · 611 SEK

Standard · ASTM ASTM D6543

Standard Guide to the Evaluation of Measurements Made by On-Line Coal Analyzers

1.1 This guide provides techniques to be used for the evaluation of the measurement performance of on-line coal analyzers. <

Språk

Publicerad

2006-04-01

PDF · 533 SEK

Standard · ASTM ASTM A990

Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service

1.1 This specification covers iron-nickel-chromium and nickel alloy castings specially processed with restricted melt practices, weldability testing, and nondestructive examination (NDE) requiremen...

Språk

Publicerad

2008-05-14

Upphävd

2010-05-17

PDF · 533 SEK

Standard · ASTM ASTM C533

Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation

1.1 This specification covers calcium silicate block and pipe thermal insulation for use on surfaces with temperatures between 80 and 1700°F (27 to 927°C), unless other This s...

Språk

Publicerad

2011-10-14

Upphävd

2013-03-01

PDF · 468 SEK

Standard · ASTM ASTM C674

Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials

1.1 These test methods cover determination of the modulus of rupture and the modulus of elasticity of fired ceramic whitewares bodies, formed by any fabrication method, and are applicable to both g...

Språk

Publicerad

2006-02-15

Upphävd

2013-03-01

PDF · 468 SEK

Standard · ASTM ASTM D665

Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water

1.1 This test method covers the evaluation of the ability of inhibited mineral oils, particularly steam-turbine oils, to aid in preventing the rusting of ferrous parts should water become mixed wit...

Språk

Publicerad

2006-05-01

Upphävd

2012-11-01

PDF · 533 SEK

Standard · ASTM ASTM D5966

Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine

1.1 This engine lubricant test method is commonly referred to as the Roller Follower Wear Test. Its primary result, roller follower shaft wear in the hydraulic valve lifter assembly, has been corr...

Språk

Publicerad

2008-05-01

Upphävd

2009-04-15

PDF · 611 SEK

Standard · ASTM ASTM D5966

Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine

1.1 This engine lubricant test method is commonly referred to as the Roller Follower Wear Test. Its primary result, roller follower shaft wear in the hydraulic valve lifter assembly, has been corr...

Språk

Publicerad

2009-04-15

Upphävd

2010-05-01

PDF · 611 SEK

Standard · ASTM ASTM D5966

Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine

1.1 This engine lubricant test method is commonly referred to as the Roller Follower Wear Test. Its primary result, roller follower shaft wear in the hydraulic valve lifter assembly, has been corr...

Språk

Publicerad

2010-09-17

Upphävd

2012-12-01

PDF · 611 SEK

Standard · ASTM ASTM D6243

Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method

1.1 This test method covers a procedure for determining the internal shear resistance of a Geosynthetic Clay Liner (GCL) or the interface shear resistance between the GCL and an adjacent material u...

Språk

Publicerad

2009-11-01

Upphävd

2013-01-01

PDF · 533 SEK

Standard · ASTM ASTM D7468

Standard Test Method for Cummins ISM Test

1.1 The test method covers a heavy-duty diesel engine test procedure conducted under high soot conditions to evaluate oil performance with regard to valve train wear, top ring wear, sludge deposits...

Språk

Publicerad

2011-12-16

Upphävd

2012-12-01

PDF · 767 SEK

Standard · ASTM ASTM E543

Standard Specification for Agencies Performing Nondestructive Testing

1.1 This specification covers minimum requirements for agencies performing nondestructive testing (NDT). 1.2 When using this specification to assess the capability of, or to accredit NDT agencies, ...

Språk

Publicerad

2009-06-01

Upphävd

2013-03-01

PDF · 611 SEK

Standard · ASTM ASTM E1026

Standard Practice for Using the Fricke Reference-Standard Dosimetry System

1.1 This practice covers the procedures for preparation, testing and using the acidic aqueous ferrous ammonium sulfate solution dosimetry system to measure absorbed dose to water when exposed to io...

Språk

Publicerad

2004-01-01

Upphävd

2013-01-01

PDF · 533 SEK

Standard · ASTM ASTM F959

Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners

1.1 This specification covers the requirements for compressible-washer-type direct tension indicators capable of indicating the achievement of a specified minimum bolt tension in a structural bolt...

Språk

Publicerad

2009-03-15

Upphävd

2013-03-01

PDF · 533 SEK

Standard · ASTM ASTM F959M

Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]

1.1 This specification covers the requirements for compressible-washer-type direct tension indicators capable of indicating the achievement of a specified minimum bolt tension in a structural bol...

Språk

Publicerad

2008-02-06

Upphävd

2013-01-01

PDF · 533 SEK

Standard · ASTM ASTM F1163

Standard Specification for Protective Headgear Used in Horse Sports and Horseback Riding

1.1 This specification covers minimum performance criteria and describes test methods for protective headgear for use in horse sports and horseback riding. 1.2 It is not the intention of this spec...

Språk

Publicerad

2004-12-01

Upphävd

2013-03-01

PDF · 468 SEK

Förfina din sökning genom att visa:

...som handlar om: