21307 träffar på

Standard · ASTM ASTM D4355

Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus

1.1 This test method covers the determination of the deterioration in tensile strength of geotextiles by exposure to xenon arc radiation, moisture, and heat.1.2 The light and water exposure apparat...

Språk

Publicerad

2005-06-01

Upphävd

2007-04-01

PDF · 468 SEK

Standard · ASTM ASTM F1790

Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing

1.1 This test method covers the measurement of the cut resistance of a material when mounted on a mandrel and subjected to a cutting edge under a specified load.1.1.1 This procedure is not valid fo...

Språk

Publicerad

2005-01-01

PDF · 533 SEK

Standard · ASTM ASTM D6038

Standard Test Methods for Determining the Compatibility of Resin/Solvent Mixtures by Precipitation Temperature (Cloud Point

1.1 These test methods cover the manual and automatic procedures for testing the compatibility of lithographic ink resins in high boiling ink solvents by precipitation temperature (cloud point) in ...

Språk

Publicerad

2005-07-01

PDF · 533 SEK

Standard · ASTM ASTM C150

Standard Specification for Portland Cement

1.1 This specification covers eight types of portland cement, as follows (see Note 2):1.1.1 Type I—For use when the special properties specified for any other type are not required.1.1.2 ...

Språk

Publicerad

2005-07-15

Upphävd

2007-05-01

PDF · 533 SEK

Standard · ASTM ASTM E1472

Standard Guide for Documenting Computer Software for Fire Models

1.1 This guide provides information that should be in documentation for computer software prepared for scientific and engineering computations in fire models and other areas of fire protection engi...

Språk

Publicerad

2005-08-01

Upphävd

2007-04-01

PDF · 533 SEK

Standard · ASTM ASTM F1487

Standard Consumer Safety Performance Specification for Playground Equipment for Public Use

1.1 This consumer safety performance specification provides safety and performance standards for various types of public playground equipment. Its purpose is to reduce life-threatening and debilita...

Språk

Publicerad

2005-08-15

Upphävd

2007-03-01

PDF · 858 SEK

Standard · ASTM ASTM D1349

Standard Practice for Rubber-Standard Temperatures for Testing

1.1 This practice covers a list of standard temperatures from which selection may be made for any specific test or test method. Any standard or specification that specifies test temperatures not li...

Språk

Publicerad

2005-08-15

Upphävd

2007-07-01

PDF · 468 SEK

Standard · ASTM ASTM F2263

Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water

1.1 This test method describes the general requirements for evaluating the long-term, chlorinated water, oxidative resistance of polyethylene (PE), used in cold water supply or service systems by e...

Språk

Publicerad

2005-08-01

Upphävd

2007-03-01

PDF · 533 SEK

Standard · ASTM ASTM D1424

Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus

1.1 This test method covers the determination of the force required to propagate a single-rip tear starting from a cut in a fabric and using a falling-pendulum type (Elmendorf) apparatus. 1.2 This ...

Språk

Publicerad

2004-12-01

Upphävd

2007-07-01

PDF · 533 SEK

Standard · ASTM ASTM A857/A857M

Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage

1.1 This specification covers cold-formed, light gage carbon steel sheet piling of structural quality for use in the construction of shore walls, trench shoring, cofferdams, wingwalls, bulkheads, a...

Språk

Publicerad

2005-09-01

Upphävd

2007-03-01

PDF · 468 SEK

Standard · ASTM ASTM B917/B917M

Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes

1.1 This practice is intended, when specified by material specification or purchase order, for the use in the heat treatment of aluminum alloy castings from all casting processes.1.1.1 The heat tre...

Språk

Publicerad

2005-09-01

Upphävd

2007-09-01

PDF · 611 SEK

Standard · ASTM ASTM F2144

Standard Test Method for Performance of Large Open Vat Fryers

1.1 This test method evaluates the energy consumption and cooking performance of large-vat open, deep fat fryers. The food service operator can use this evaluation to select a fryer and understand ...

Språk

Publicerad

2005-09-01

Upphävd

2007-02-01

PDF · 611 SEK

Standard · ASTM ASTM A388/A388M

Standard Practice for Ultrasonic Examination of Heavy Steel Forgings

1.1 This practice covers the examination procedures for the contact, pulse-echo ultrasonic examination of heavy steel forgings by the straight and angle-beam techniques. The straight beam technique...

Språk

Publicerad

2005-09-01

Upphävd

2007-03-01

PDF · 533 SEK

Standard · ASTM ASTM A472/A472M

Standard Test Method for Heat Stability of Steam Turbine Shafts and Rotor Forgings

1.1 This test method covers the determination of heat stability of steam turbine shafts and rotor forgings to ensure stability at operating temperature. This test method is not ordinarily applicabl...

Språk

Publicerad

2005-09-01

Upphävd

2007-09-01

PDF · 468 SEK

Standard · ASTM ASTM A418/A418M

Standard Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings

1.1 This test method for ultrasonic examination applies to turbine and generator steel rotor forgings covered by Specifications A 293, A 469/A 469M, and A 470. This standard shall be used for conta...

Språk

Publicerad

2005-09-01

Upphävd

2007-05-01

PDF · 533 SEK

Standard · ASTM ASTM D4006

Standard Test Method for Water in Crude Oil by Distillation

1.1 This test method covers the determination of water in crude oil by distillation.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is ...

Språk

Publicerad

2005-06-01

Upphävd

2007-08-01

PDF · 611 SEK

Standard · ASTM ASTM E108

Standard Test Methods for Fire Tests of Roof Coverings

1.1 This fire-test-response standard covers the measurement of the relative fire characteristics of roof coverings under simulated fire originating outside the building. It is applicable to roof co...

Språk

Publicerad

2005-09-01

Upphävd

2007-05-09

PDF · 611 SEK

Standard · ASTM ASTM D2307

Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire

1.1 This test method covers determination of the thermal endurance of film-insulated round magnet wire in air at atmospheric pressure. It is not applicable to magnet wire with fibrous insulation, s...

Språk

Publicerad

2005-09-01

Upphävd

2007-01-01

PDF · 533 SEK

Standard · ASTM ASTM F1361

Standard Test Method for Performance of Open Deep Fat Fryers

1.1 This test method covers the evaluation of the energy consumption and cooking performance of open, deep fat fryers. The food service operator can use this evaluation to select a fryer and unders...

Språk

Publicerad

2005-09-01

Upphävd

2007-02-01

PDF · 611 SEK

Standard · ASTM ASTM F2195

Standard Specification for Linoleum Floor Tile

1.1 This specification covers floor tiles made of a homogeneous mixture of linoleum cement binder calendered or pressed onto a fibrous or suitable backing.1.2 Four types of linoleum floor tile are ...

Språk

Publicerad

2003-09-10

Upphävd

2007-05-01

PDF · 468 SEK

Standard · ASTM ASTM ISO 9919

Medical Electrical Equipment—Particular Requirements for the Basic Safety and Essential Performance of Pulse Oximeter Equipment for Medic...

This International Standard specified particular requirement for the basic safety and essential performance of pulse oximeter equipment intended for use on humans. This includes any part necessary...

Språk

Publicerad

2005-05-01

Standard · ASTM ASTM D4301

Standard Test Method for Total Chlorine in Epoxy Resins and Compounds

1.1 This test method describes a procedure for the determination of total chlorine in epoxy resins and glycidyl ethers.1.2 This standard does not purport to address all of the safety concerns, if a...

Språk

Publicerad

2005-09-01

PDF · 468 SEK

Standard · ASTM ASTM D6164

Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements

1.1 This specification covers prefabricated modified bituminous sheet materials reinforced with polyester fabric as the primary reinforcement, (see Note 0) with or without granules, which use styre...

Språk

Publicerad

2005-10-01

PDF · 468 SEK

Standard · ASTM ASTM A426/A426M

Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service

1.1 This specification covers centrifugally cast alloy steel pipe intended for use in high-temperature, high-pressure service.1.2 Several grades of ferritic steels are covered. Their compositions a...

Språk

Publicerad

2005-09-15

Upphävd

2007-05-01

PDF · 533 SEK

Standard · ASTM ASTM D1413

Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures

1.1 This test method covers determination of the minimum amount of preservative that is effective in preventing decay of selected species of wood by selected fungi under optimum laboratory conditio...

Språk

Publicerad

2005-09-15

Upphävd

2007-04-01

PDF · 533 SEK

Standard · ASTM ASTM D2017

Standard Test Method of Accelerated Laboratory Test of Natural Decay Resistance of Woods

1.1 This test method covers the evaluation of the natural decay resistance of wood. The test method may also be used to evaluate the resistance of wood products or of other organic materials subjec...

Språk

Publicerad

2005-09-15

PDF · 533 SEK

Standard · ASTM ASTM A673/A673M

Standard Specification for Sampling Procedure for Impact Testing of Structural Steel

1.1 This specification establishes the procedure for longitudinal Charpy V-notch testing of structural steel and contains two frequencies of testing. The impact properties of steel can vary within ...

Språk

Publicerad

2005-09-01

Upphävd

2007-03-01

PDF · 533 SEK

Standard · ASTM ASTM C950

Standard Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels

1.1 This practice covers the repair of spray-applied polyurethane insulation on vessels normally operating at temperatures between 30 and + 107°C (22 and + 225°F).1.2 Caution-At ...

Språk

Publicerad

2005-09-01

PDF · 468 SEK

Standard · ASTM ASTM D5397

Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test

1.1 This test method is used to develop test data from which the susceptibility of polyolefin geomembrane sheet material to stress cracking under a constant tensile load condition and an accelerate...

Språk

Publicerad

2005-06-01

Upphävd

2007-06-01

PDF · 533 SEK

Standard · ASTM ASTM A82/A82M

Standard Specification for Steel Wire, Plain, for Concrete Reinforcement

1.1 This specification covers cold-drawn steel wire, as-drawn or galvanized, to be used as such, or in fabricated form, for the reinforcement of concrete, in sizes not less than 2.03 mm [0.080 in.]...

Språk

Publicerad

2005-10-01

Upphävd

2007-09-01

PDF · 533 SEK

Förfina din sökning genom att visa:

...som handlar om: