21294 träffar på

ASTM D2613
Standard · ASTM ASTM D2613

Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method

1.1 This test method covers a titrimetric determination of calcium in liquid calcium driers and zinc in liquid zinc driers that can be dissolved in a toluene-alcohol mixture and ut

Språk

Publicerad

2006-06-01
PDF · 468 SEK
ASTM A701/A701M
Standard · ASTM ASTM A701/A701M

Standard Specification for Ferromanganese-Silicon

1.1 This specification covers a manganese-silicon alloy. 1.2 Units—The values stated in either SI units or inch-pound units are to be regarded separately as st This specification covers f...

Språk

Publicerad

2011-05-20
PDF · 468 SEK
ASTM D6935
Standard · ASTM ASTM D6935

Standard Test Method for Determining Cement Mixing of Emulsified Asphalt

1.1 This test method is intended to be a mixing test used to identify or classify a slow setting, SS or CSS, type of emulsified asphalt. 1.2 This test method does not purport to address all of the s

Språk

Publicerad

2011-11-18
PDF · 468 SEK
ASTM E1496
Standard · ASTM ASTM E1496

Standard Test Method for Neutron Radiographic Dimensional Measurements (Withdrawn 2012)

1.1 This test method provides a technique for extracting quantitative dimensional information on an object from its neutron radiograph. The technique is based on the identification of changes in fi...

Språk

Publicerad

2005-06-01

Upphävd

2012-06-15
PDF · 468 SEK
ASTM D2581
Standard · ASTM ASTM D2581

Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials

1.1 This classification system covers polybutylene plastics materials suitable for molding and extrusion. 1.2 This classification system is applicable to all butene homopolymers and to copolymers o...

Språk

Publicerad

2009-08-01
PDF · 611 SEK
ASTM D1766
Standard · ASTM ASTM D1766

Standard Test Method for Rubber ChemicalsSolubility

1.1 This test method covers a practical test for the solubility of commercial chemicals used in rubber products. 1.2 It is not a true measure of solubility, since equilibrium is not approached fr...

Språk

Publicerad

2005-10-01
PDF · 468 SEK
ASTM D4071
Standard · ASTM ASTM D4071

Standard Practice for Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems

1.1 This practice covers liquid applied, preformed, or built-up water barrier membrane systems and their application; overlaid with bituminous concrete wearing courses, for use in the protection of...

Språk

Publicerad

2005-06-01
PDF · 468 SEK
ASTM C1587
Standard · ASTM ASTM C1587

Standard Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Testing

1.1 The purpose of this practice is to standardize the preparation of manufactured masonry units and masonry specimens extracted from the field for compressive and flexural bond strength testing ...

Språk

Publicerad

2009-06-01
PDF · 468 SEK
ASTM B324
Standard · ASTM ASTM B324

Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes

1.1 This specification covers aluminum 1350-O, annealed, 1350-H12 or -H22 (1/4 hard), 1350-H14 or -H24 (1/2 hard), 1350-H1 This specification covers aluminum 1350-O...

Språk

Publicerad

2007-06-11
PDF · 533 SEK
ASTM D3260
Standard · ASTM ASTM D3260

Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products

1.1 This test method covers the evaluation of the mortar and acid resistance of clear protective coating factory applied to extruded aluminum substrates. 1.2 The values stated in SI units are to be...

Språk

Publicerad

2005-05-15
PDF · 468 SEK
ASTM D2961
Standard · ASTM ASTM D2961

Standard Test Method for Single-Stage Total Moisture Less than 15% in Coal Reduced to 2.36-mm (No. 8 Sieve) Topsize

1.1 This test method covers a single-stage procedure for the determination of total moisture less than 15 % in coal reduced to 2.36- mm (No. 8 sieve) topsize. This test method is for determination ...

Språk

Publicerad

2012-02-24
PDF · 468 SEK
ASTM E2100
Standard · ASTM ASTM E2100

Standard Practice for Calculating the International Runway Friction Index

1.1 This practice covers the calculation of the International Runway Friction Index, IRFI, from measurements obtained by local friction-measurement devices on movement areas under winter condition...

Språk

Publicerad

2004-12-01
PDF · 533 SEK
ASTM E2156
Standard · ASTM ASTM E2156

Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides ...

1.1 What This Guide Does—This guide helps designers, builders, home owners, and other stakeholders to identify and evaluate benefits and costs in order to make effic

Språk

Publicerad

2004-10-01
PDF · 767 SEK
ASTM F2009
Standard · ASTM ASTM F2009

Standard Test Method for Determining the Axial Disassembly Force of Taper Connections of Modular Prostheses

1.1 This test method establishes a standard methodology for determining the force required, under laboratory conditions, to disassemble tapers of implants that are otherwise not intended to release...

Språk

Publicerad

2005-10-01
PDF · 468 SEK
ASTM C1615
Standard · ASTM ASTM C1615

Standard Guide for Mechanical Drive Systems for Remote Operation in Hot Cell Facilities

1.1 Intent: 1.1.1 The intent of this standard is to provide general guidelines for the design, selection, quality assurance, installation, operation, and maint

Språk

Publicerad

2010-09-17
PDF · 611 SEK
ASTM D5853
Standard · ASTM ASTM D5853

Standard Test Method for Pour Point of Crude Oils

1.1 This test method covers two procedures for the determination of the pour point temperatures of crude oils down to −36°C. Procedure A provides a measure of the maxim

Språk

Publicerad

2011-09-16
PDF · 533 SEK
ASTM D5635/D5635M
Standard · ASTM ASTM D5635/D5635M

Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens

1.1 This test method covers the evaluation of the maximum dynamic puncture load that roofing membrane samples can withstand, without allowing the passage of water, when subjected to impact from a r...

Språk

Publicerad

2011-05-20
PDF · 533 SEK
ASTM E2124
Standard · ASTM ASTM E2124

Standard Practice for the Specification for Equipment and Supplies in Sexual Assault Investigations

1.1 This practice describes the basic instruments used for the medical-legal examination of victims or suspects, or both, in sexual assault investigations. These specifications are designed to be u...

Språk

Publicerad

2010-09-17
PDF · 468 SEK
ASTM D4497
Standard · ASTM ASTM D4497

Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method)

1.1 This test method covers the manual determination of the open-time range of hot-melt adhesives under the stated conditions. 1.2 The values stated in SI units are to be regarded as the standard....

Språk

Publicerad

2011-04-15
PDF · 468 SEK
ASTM E1643
Standard · ASTM ASTM E1643

Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under ...

1.1 This practice covers procedures for selecting, designing, installing, and inspecting flexible, prefabricated sheet membranes in contact with earth or granular fill used as vapor retarders und...

Språk

Publicerad

2011-11-18
PDF · 468 SEK
ASTM C761
Standard · ASTM ASTM C761

Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride

1.1 These test methods cover procedures for subsampling and for chemical, mass spectrometric, spectrochemical, nuclear, and radiochemical analysis of uranium hexafluoride UF6. Most of these test me...

Språk

Publicerad

2004-07-01
PDF · 767 SEK
ASTM E808
Standard · ASTM ASTM E808

Standard Practice for Describing Retroreflection

1.1 This practice provides terminology, alternative geometrical coordinate systems, and procedures for designating angles in descriptions of retroreflectors, specifications for retroreflector per...

Språk

Publicerad

2009-02-01
PDF · 533 SEK
ASTM D7716
Standard · ASTM ASTM D7716

Standard Test Method for Determination of Residual Methanol in Glycerin by Gas Chromatography

1.1 This test method provides for the quantitative determination of residual methanol in glycerin by gas chromatography. The range of detection for residual methanol is 0.02 to 0.60 mass %. 1.2 The...

Språk

Publicerad

2011-11-18
PDF · 468 SEK
ASTM D1185
Standard · ASTM ASTM D1185

Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping

1.1 These test methods cover the performance of pallets and related structures, functioning as skids, bases, platforms, and bins in materials handling and shipping. Their use facilitates the protec...

Språk

Publicerad

1998-01-01
PDF · 611 SEK
ASTM D4282
Standard · ASTM ASTM D4282

Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion

1.1 This test method covers the determination of free cyanides in waters and wastewaters. Free cyanide is here defined as the cyanide which diffuses as cyanide (HCN), at room temperature, from a so...

Språk

Publicerad

2002-07-10
PDF · 533 SEK
ASTM E1448/E1448M
Standard · ASTM ASTM E1448/E1448M

Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness

1.1 This practice describes equipment and procedures for the calibration of systems used for measuring vehicular response to pavement roughness. Such systems are referred to as response-type system...

Språk

Publicerad

2009-11-01
PDF · 533 SEK
ASTM D3863
Standard · ASTM ASTM D3863

Standard Test Method for Retention Characteristics of 0.40 to 0.45-μm Membrane Filters Used in Routine Filtration Procedures for the Ev...

1.1 This test method covers a procedure to test membrane filters for their ability to retain bacteria whose diameter is equal to or slightly larger than membrane filters with pore size rated at 0....

Språk

Publicerad

1987-03-27
PDF · 468 SEK
ASTM B422
Standard · ASTM ASTM B422

Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-...

1.1 This specification establishes the requirements for Copper Alloy UNS Nos. C19002, C19010, C19015, ,C19020, C19025, C63800, C64725, C70250, C70260, C70265, and C70310 sheet and strip. 1.2 The ...

Språk

Publicerad

2010-05-17
PDF · 533 SEK
ASTM A587
Standard · ASTM ASTM A587

Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry

1.1 This specification2 covers electric-resistance-welded low-carbon steel pipe intended for This specification covers electric-resistance-welded low-carbon steel pipe for use as process...

Språk

Publicerad

2005-10-01
PDF · 533 SEK
ASTM F2350
Standard · ASTM ASTM F2350

Standard Practice for Selection of Natural Gas Pipelines Suitable for Installation of Optical Fiber Systems

1.1 This practice specifically addresses the criteria for determining the suitability of natural gas pipelines for use as conduits for optical fiber cable systems, as opposed to standards for the o...

Språk

Publicerad

2004-07-01
PDF · 468 SEK
Förfina din sökning genom att visa:
...som handlar om:

Ämnesområden (0)

Avbryt

Branscher (0)

Avbryt

Syfte (0)

Avbryt

Material (0)

Avbryt
Visa varukorgen Fortsätt handla 0
Varukorgen Stäng
Annonstext