21303 träffar på

ASTM D6365
Standard · ASTM ASTM D6365

Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test

1.1 This practice covers the nondestructive testing of field seams in geomembranes using the spark test. A suspect area is indicated by the generation of a spark. The test is applicable to seams ma...

Språk

Publicerad

2006-06-01
PDF · 468 SEK
ASTM F1635
Standard · ASTM ASTM F1635

Standard Test Method for in vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants

1.1 This test method covers in vitro degradation of hydrolytically degradable polymers (HDP) intended for use in surgical implants. 1.2 The requirements of this test method apply to HDPs in var

Språk

Publicerad

2011-05-20
PDF · 533 SEK
ASTM D7466
Standard · ASTM ASTM D7466

Standard Test Method for Measuring the Asperity Height of Textured Geomembrane

1.1 This test method covers a procedure to measure the asperity height of textured geomembranes. 1.2 This test method does not provide for measurement of the spacing between the asperities nor of ...

Språk

Publicerad

2010-10-15
PDF · 468 SEK
ASTM D6249
Standard · ASTM ASTM D6249

Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals

1.1 This document provides guidance for use of reactive alkaline materials (quicklime, hydrated lime, high lime fly ash, or other byproducts) for treating wastewater solids (biosolids) to reduce pa...

Språk

Publicerad

2006-06-01
PDF · 533 SEK
ASTM E1084
Standard · ASTM ASTM E1084

Standard Test Method for Solar Transmittance (Terrestrial) of Sheet Materials Using Sunlight

1.1 This test method covers the measurement of solar transmittance (terrestrial) of materials in sheet form by using a pyranometer, an enclosure, and the sun as the energy source. 1.2 This test me...

Språk

Publicerad

1986-02-21
PDF · 533 SEK
ASTM F2507
Standard · ASTM ASTM F2507

Standard Specification for Recreational Airpark Design

1.1 This specification covers the minimum requirements for the design of a recreational airpark intended to service any aircraft with stall speeds (Vs1) of 45 knots or less. These aircraft include ...

Språk

Publicerad

2005-11-15
PDF · 533 SEK
ASTM D6445
Standard · ASTM ASTM D6445

Standard Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry (Withdrawn 2009)

1.1 This test method covers the measurement of sulfur in nonleaded gasoline and gasoline-oxygenate blends. The applicable concentration range is 48 to 1000 mg/kg sulfur. 1.2 The values stated in SI...

Språk

Publicerad

2004-05-01

Upphävd

2009-09-01
PDF · 533 SEK
ASTM D2079
Standard · ASTM ASTM D2079

Standard Test Method for Nonvolatile Matter (Solids) in Fatty Quaternary Ammonium Chlorides (Withdrawn 2007)

1.1 This method covers the determination of nonvolatile matter (solids) in fatty quaternary ammonium chlorides. 1.2 This standard does not purport to address all of the safety problems, if any, as...

Språk

Publicerad

1992-01-01

Upphävd

2007-03-20
PDF · 468 SEK
ASTM E250
Standard · ASTM ASTM E250

Standard Practice for Use of CODEN

1.1 This practice defines CODEN, how to obtain them, and how they can be used or applied. 1.2 The rules for establishing or selecting the publication title to which a CODEN is assigned, as well a...

Språk

Publicerad

2009-10-01
PDF · 468 SEK
ASTM D4441
Standard · ASTM ASTM D4441

Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene

1.1 This specification covers aqueous dispersions of polytetrafluoroethylene (PTFE) resins. These resins are homopolymers of tetrafluoroethylene, or in some cases modified homopolymers containing n...

Språk

Publicerad

2004-06-01
PDF · 533 SEK
ASTM A476/A476M
Standard · ASTM ASTM A476/A476M

Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls

1.1 This specification covers ductile iron castings for use in pressure containing paper mill dryer rolls at temperatures up to 450°F [230°C]. 1.2 No This specification covers...

Språk

Publicerad

2009-10-01
PDF · 533 SEK
ASTM E694
Standard · ASTM ASTM E694

Standard Specification for Laboratory Glass Volumetric Apparatus

1.1 This specification covers general requirements common to glass volumetric apparatus. Specific dimensions and tolerances for applicable instruments are given in other specifications as cited th...

Språk

Publicerad

2005-05-01
PDF · 533 SEK
ASTM D5249
Standard · ASTM ASTM D5249

Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints

1.1 This specification covers backer material for cold- and hot-applied joint sealant for use in portland-cement concrete or asphalt-pavement joints. 1.2 This specification establishes basic requi...

Språk

Publicerad

2011-04-15
PDF · 468 SEK
ASTM C1364
Standard · ASTM ASTM C1364

Standard Specification for Architectural Cast Stone

1.1 This specification includes the physical properties, sampling, testing, tolerance, and appearance requirements for architectural cast stone. 1.2 Cast stone units covered under this specificatio...

Språk

Publicerad

2010-09-17
PDF · 468 SEK
ASTM E516
Standard · ASTM ASTM E516

Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography

1.1 This practice is intended to serve as a guide for the testing of the performance of a thermal conductivity detector (TCD) used as the detection component of a gas chromatographic sys

Språk

Publicerad

2005-09-01
PDF · 533 SEK
ASTM C293/C293M
Standard · ASTM ASTM C293/C293M

Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)

1.1 This test method covers determination of the flexural strength of concrete specimens by the use of a simple beam with center-point loading. It is not an alternative to Test Method <a href="h...

Språk

Publicerad

2010-08-01
PDF · 468 SEK
ASTM A516/A516M
Standard · ASTM ASTM A516/A516M

Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service

1.1 This specification covers carbon steel plates intended primarily for service in welded pressure vessels where improved notch toughness is important. 1.2 Plates under this specification are a...

Språk

Publicerad

2011-03-18
PDF · 468 SEK
ASTM B135M
Standard · ASTM ASTM B135M

Standard Specification for Seamless Brass Tube [Metric]

1.1 This specification covers seamless round and rectangular including square copper alloy tube in straight lengths. Ten alloys are specified having the following nominal compositions: This specif...

Språk

Publicerad

2011-04-15
PDF · 533 SEK
ASTM D932
Standard · ASTM ASTM D932

Standard Test Method for Iron Bacteria in Water and Water-Formed Deposits

1.1 This test method covers the determination of iron bacteria by examination under the microscope. The method provides for the identification of the following genera of bacteria found in water an...

Språk

Publicerad

1985-08-30
PDF · 533 SEK
ASTM D3434
Standard · ASTM ASTM D3434

Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives

1.1&#x00a0;This test method covers a procedure for testing the durability of wood adhesives that may be suitable for exterior (wet use) exposure conditions. The possible use of adhesives

Språk

Publicerad

2000-03-10
PDF · 533 SEK
ASTM F1362
Standard · ASTM ASTM F1362

Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials

1.1 This test method covers the determination of the shear strength and shear modulus of interlayer materials that are restrained by relatively high modulus plies in laminated transparencies. This ...

Språk

Publicerad

2009-05-15
PDF · 533 SEK
ASTM D6165
Standard · ASTM ASTM D6165

Standard Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, and Related Materials

1.1&#x00a0;This guide is intended to provide direction in order to assist the producers and users of paints, inks, and related coatings, and others who may also be exposed, to detect, com

Språk

Publicerad

2008-06-01
PDF · 468 SEK
ASTM C201
Standard · ASTM ASTM C201

Standard Test Method for Thermal Conductivity of Refractories

1.1 This test method covers the determination of the comparative thermal conductivity of refractories under standardized conditions of testing. This test method is designed for refractories having...

Språk

Publicerad

2004-09-01
PDF · 533 SEK
ASTM D1442
Standard · ASTM ASTM D1442

Standard Test Method for Maturity of Cotton Fibers (Sodium Hydroxide Swelling and Polarized Light Procedures)

1.1 This test method covers the determination of the percentage of mature fibers in a sample of loose, chemically untreated cotton fibers, whether taken before processing or unravelled from a texti...

Språk

Publicerad

2006-06-01
PDF · 533 SEK
ASTM G197
Standard · ASTM ASTM G197

Standard Table for Reference Solar Spectral Distributions: Direct and Diffuse on 20&deg; Tilted and Vertical Surfaces

1.1&#x00a0;This table provides terrestrial solar spectral irradiance distributions that may be employed as weighting functions to (1)</

Språk

Publicerad

2008-11-05
PDF · 767 SEK
ASTM A895
Standard · ASTM ASTM A895

Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip

1.1 This specification covers hot-finished or cold-finished plate, sheet, and strip in the more commonly used types of stainless free machining steels designed especially for optimum machinability ...

Språk

Publicerad

2004-09-01
PDF · 468 SEK
ASTM F1144
Standard · ASTM ASTM F1144

Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight, Hinged

1.1 This specification provides design and construction criteria for a semi-flush, oiltight and watertight bolted hinged manhole cover assembly. This specification covers the requirements for the ...

Språk

Publicerad

2007-12-01
PDF · 533 SEK
ASTM F99
Standard · ASTM ASTM F99

Standard Guide for Writing a Specification for Flexible Barrier Rollstock Materials

1.1 This guide defines the requirements and considerations for flexible barrier materials. 1.2 This guide addresses some critical printing requirements for flexible barrier materials. 1.3 Guidance ...

Språk

Publicerad

2007-10-10
PDF · 468 SEK
ASTM F2113
Standard · ASTM ASTM F2113

Standard Guide for Analysis and Reporting the Impurity Content and Grade of High Purity Metallic Sputtering Targets for Electronic Thin Film Applic...

1.1 This guide covers sputtering targets used as thin film source material in fabricating semiconductor electronic devices. It should be used to develop target specifications for specific materials...

Språk

Publicerad

2007-09-05
PDF · 468 SEK
ASTM D6851
Standard · ASTM ASTM D6851

Standard Test Method for Determination of Contact pH with Activated Carbon

1.1 This method is to be used in the determination of the pH of water on initial contact with activated carbon. This test method is not meant as a replacement for Test Method <a href="http://mya...

Språk

Publicerad

2008-01-09
PDF · 468 SEK
Förfina din sökning genom att visa:
...som handlar om:

Ämnesområden (0)

Avbryt

Branscher (0)

Avbryt

Syfte (0)

Avbryt

Material (0)

Avbryt
Visa varukorgen Fortsätt handla 0
Varukorgen Stäng
Annonstext