21303 träffar på

Standard · ASTM ASTM D5679

Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers

1.1 This practice covers typical equipment and methods for collecting samples of consolidated solids in drums or similar containers. These methods are adapted specifically for samp

Språk

Publicerad

2007-01-11

PDF · 533 SEK

Standard · ASTM ASTM A220/A220M

Standard Specification for Pearlitic Malleable Iron

1.1 This specification covers pearlitic malleable iron castings for general engineering usage at temperatures from normal ambient to approximately 750°F [400°C]. This specific...

Språk

Publicerad

2009-05-01

PDF · 533 SEK

Standard · ASTM ASTM F1157

Standard Practice for Classifying the Relative Performance of the Physical Properties of Security Seals

1.1 This practice covers methods for testing the physical properties of mechanical (passive) security seals. Where appropriate, the various tests include particular apparatus or procedural specific...

Språk

Publicerad

2004-09-01

PDF · 533 SEK

Standard · ASTM ASTM G52

Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater

1.1 This practice covers conditions for the exposure of metals, alloys, and other materials in natural surface seawater such as those typically found in bays, harbors, channels, and so forth, as co...

Språk

Publicerad

2006-05-01

PDF · 468 SEK

Standard · ASTM ASTM D946/D946M

Standard Specification for Penetration-Graded Asphalt Cement for Use in Pavement Construction

1.1 This specification covers asphalt cement for use in the construction of pavements. 1.2 This specification covers the following penetration grades: This specification covers the standard for asp...

Språk

Publicerad

2009-12-01

PDF · 468 SEK

Standard · ASTM ASTM E2450

Standard Practice for Application of CaF2(Mn) Thermoluminescence Dosimeters in Mixed Neutron-Photon Environments

1.1 This practice describes a procedure for measuring gamma-ray absorbed dose in CaF2(Mn) thermoluminescence dosimeters (TLDs) exposed to mixed neutron-photon environments during irradiation of mat...

Språk

Publicerad

2012-02-24

PDF · 533 SEK

Standard · ASTM ASTM E1333

Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber

1.1 This test method measures the formaldehyde concentration in air and emission rate from wood products containing formaldehyde under conditions designed to simulate product use (see 11.5 and Note...

Språk

Publicerad

2010-09-17

PDF · 611 SEK

Standard · ASTM ASTM D6659

Standard Practice for Sampling and Preparation of Wet Blue for Physical and Chemical Tests

1.1 This practice covers the sampling and preparation of wet blue for physical and chemical tests. The product is grouped into lots that are randomly sampled in such a manner as to produce a repres...

Språk

Publicerad

2011-04-15

PDF · 468 SEK

Standard · ASTM ASTM B968/B968M

Standard Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube

1.1 This test method establishes the requirements for the flattening test for copper and copper alloy pipe and tube of all sizes. The method addresses both inch-pound and metric considerations, and...

Språk

Publicerad

2010-04-01

PDF · 468 SEK

Standard · ASTM ASTM D6361/D6361M

Standard Guide for Selecting Cleaning Agents and Processes

1.1 This guide is intended to assist design engineers, manufacturing/industrial engineers, and production managers in selecting the best fit cleaning agent and process. This guide takes into accoun...

Språk

Publicerad

2010-06-01

PDF · 533 SEK

Standard · ASTM ASTM D4931

Standard Test Method for Gross Moisture in Green Petroleum Coke

1.1 This test method covers both the preparation procedure for samples containing free water (air drying loss (ADL) on gross moisture samples) and the determination of the gross moisture content of...

Språk

Publicerad

2006-07-01

PDF · 468 SEK

Standard · ASTM ASTM B398/B398M

Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes

1.1 This specification covers aluminum-alloy 6201-T81 (hard: solution heat-treated, cold worked, and artificially aged) round wire for electrical purposes.This specification covers alumi...

Språk

Publicerad

2002-10-10

PDF · 468 SEK

Standard · ASTM ASTM D1596

Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material

1.1 This test method covers a procedure for obtaining dynamic shock cushioning characteristics of packaging materials through acceleration-time data achieved from dropping a falling guided platen ...

Språk

Publicerad

1997-01-01

PDF · 468 SEK

Standard · ASTM ASTM D6070

Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable

1.1 These test methods cover procedures for determining the environmental performance properties of smooth-wall, coilable, medium-density and high-density polyethylene (MDPE and HDPE) conduit (duc...

Språk

Publicerad

2002-09-10

PDF · 468 SEK

Standard · ASTM ASTM E2448

Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials

1.1 This test method describes the procedure for determining the superplastic forming properties (SPF) of a metallic sheet material. It includes tests both for the basic SPF properties and also for...

Språk

Publicerad

2011-09-16

PDF · 533 SEK

Standard · ASTM ASTM D5776

Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration

1.1 This test method determines the amount of bromine-reactive material in aromatic hydrocarbons and is thus a measure of trace amounts of unsaturates in these materials. It is applicable to mat...

Språk

Publicerad

2007-12-05

PDF · 468 SEK

Standard · ASTM ASTM D6568

Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples

1.1 This guide sets a protocol for generating and reporting chemical analyses that are traceable to SI units or to certified reference materials in laboratories that serve the water and environmen...

Språk

Publicerad

2006-02-15

PDF · 468 SEK

Standard · ASTM ASTM C1442

Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus

1.1 This practice covers three types of laboratory weathering exposure procedures for evaluating the effect of actinic radiation, heat, and moisture on sealants. 1.2 The exposure sources used in th...

Språk

Publicerad

2011-05-20

PDF · 533 SEK

Standard · ASTM ASTM D6345

Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air

1.1 This guide provides assistance in the selection of active integrative sampling methods, in which the volatile organic analytes are collected from air over a period of time by drawing the air in...

Språk

Publicerad

2010-09-17

PDF · 533 SEK

Standard · ASTM ASTM E1344

Standard Guide for Evaluation of Fuel Ethanol Manufacturing Facilities (Withdrawn 2009)

1.1 This guide shall apply to FEMF as defined in Terminology E 1126. The guide is primarily intended for, but not exclusively limited to the evaluation of fermentation ethanol (ethyl alcohol) proce...

Språk

Publicerad

2006-02-01

Upphävd

2009-09-01

PDF · 767 SEK

Standard · ASTM ASTM D3448

Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane

1.1 This test method covers the determination of aqueous conductivity due to ionizable contaminants extracted from trichlorotrifluoroethane. The value of 1.9 μS/cm as maximum specific a...

Språk

Publicerad

2010-09-17

PDF · 468 SEK

Standard · ASTM ASTM F505

Standard Practice for Comparative Evaluation of Imaging Properties of Liquid Electrostatic Toners

1.1 This practice guides the consumer toward preparing a test for liquid toners used in copiers, which has significance to their specific copying needs, and suggests ways in which test prints may b...

Språk

Publicerad

2006-06-01

PDF · 468 SEK

Standard · ASTM ASTM B645

Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys

1.1 This practice is applicable to the fracture toughness testing of all aluminum alloys, tempers, and products, especially in cases where the tests are being made to establish whether or not indiv...

Språk

Publicerad

2010-09-17

PDF · 533 SEK

Standard · ASTM ASTM E194

Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders

1.1 This test method covers the determination of the mineral-acid-insoluble matter content of copper and iron powders in amounts under 1.0 %. 1.2 This standard does not purport to address all of the

Språk

Publicerad

2010-09-17

PDF · 468 SEK

Standard · ASTM ASTM D3186

Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil

1.1 These test methods cover the standard materials, test formula, mixing procedures, and test methods for the evaluation and production control of pigmented types of styrene-butadiene rubbers (SB...

Språk

Publicerad

2007-05-09

PDF · 468 SEK

Standard · ASTM ASTM C1491

Standard Specification for Concrete Roof Pavers

1.1 This specification covers concrete roof pavers that are machine-made from hydraulic cement, water, and suitable mineral aggregates with or without the inclusion of other materials, for use as ...

Språk

Publicerad

2012-02-24

PDF · 468 SEK

Standard · ASTM ASTM D6238

Standard Test Method for Total Oxygen Demand in Water

1.1 This test method covers the determination of total oxygen demand in the range from 100 to 100 000 mg/L, in water and wastewater including brackish waters and brines (see 6.5). Larger concentrat...

Språk

Publicerad

1998-03-10

PDF · 533 SEK

Standard · ASTM ASTM D1524

Standard Test Method for Visual Examination of Used Electrical Insulating Oils of Petroleum Origin in the Field

1.1 This test method for visual examination is applicable to mineral oils of petroleum origin that have been used in transformers, oil circuit breakers, or other electrical apparatus as insulating ...

Språk

Publicerad

2004-10-01

PDF · 468 SEK

Standard · ASTM ASTM D7077

Standard Test Method for Evaluation of Drop Size by weight of Solutions and Suspensions (Withdrawn 2010)

1.1 This standard test method uses a simulated in-use study to measure the drop size by weight and to determine the number of drops per container for solutions and suspensions contained in a packa...

Språk

Publicerad

2004-10-01

Upphävd

2010-04-01

PDF · 468 SEK

Standard · ASTM ASTM D3087

Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal

1.1 This test method covers the determination of the operating capacity of anion-exchange materials when used for the removal of hydrochloric and sulfuric acid from water. It is designed to simula...

Språk

Publicerad

2004-06-01

PDF · 468 SEK

Förfina din sökning genom att visa:

...som handlar om:

21303 träffar på

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Upphävd

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Upphävd

Språk

Publicerad

Ämnesområden (0)

Branscher (0)

Syfte (0)

Material (0)