21317 träffar på

ASTM D473
Standard · ASTM ASTM D473

Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method

1.1 This test method covers the determination of sediment in crude oils and fuel oils by extraction with toluene. The precision applies to a range of sediment levels from 0.01 to 0

Språk

Publicerad

2007-09-05
PDF · 533 SEK
ASTM A795/A795M
Standard · ASTM ASTM A795/A795M

Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use

1.1 This specification covers black and hot-dipped galvanized welded and seamless steel pipe in NPS 1/2 to NPS 10, inclusive [DN 15 to DN 250, inclusive] (This specification covers black...

Språk

Publicerad

2008-05-15
PDF · 533 SEK
ASTM D5044
Standard · ASTM ASTM D5044

Standard Test Method for Rubber Compounding Materials—Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS)

1.1 This test method covers the procedure for estimation of the acidic impurities in benzothiazyl disulfide (MBTS). 1.2 The values stated in SI units are to be regarded as standard. No other units...

Språk

Publicerad

2007-01-11
PDF · 468 SEK
ASTM F956
Standard · ASTM ASTM F956

Standard Specification for Bell, Cast, Sound Signalling

1.1 This specification covers cast sound-signalling bells, together with bulkhead mounting plates for the smaller bells, for use on ships, boats, and other marine craft, for compliance with the rul...

Språk

Publicerad

2007-02-07
PDF · 533 SEK
ASTM D5889
Standard · ASTM ASTM D5889

Standard Practice for Quality Control of Geosynthetic Clay Liners

1.1 This practice covers the manufacturing quality control of geosynthetic clay liners (GCLs), describing types of tests, the proper test methods, and the minimum testing frequencies. 1.2 This pra...

Språk

Publicerad

2011-11-18
PDF · 468 SEK
ASTM D2786
Standard · ASTM ASTM D2786

Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry

1.1 This test method covers the determination by high ionizing voltage mass spectrometry of seven saturated hydrocarbon types and one aromatic type in saturate petroleum fractions having average c...

Språk

Publicerad

2006-05-01
PDF · 533 SEK
ASTM E1002
Standard · ASTM ASTM E1002

Standard Practice for Leaks Using Ultrasonics

1.1 Practice A, Pressurization—This practice covers procedures for calibration of ultrasonic instruments, location, and estimated measurements of gas leakage to atmosphere by the

Språk

Publicerad

2011-09-16
PDF · 468 SEK
ASTM D3309
Standard · ASTM ASTM D3309

Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems (Withdrawn 2010)

1.1 This specification covers requirements, test methods, and methods of marking for polybutylene plastic system components made in one standard dimension ratio and intended for 0.69 MPa (100 psi) ...

Språk

Publicerad

1996-09-10

Upphävd

2010-03-01
PDF · 611 SEK
ASTM C787
Standard · ASTM ASTM C787

Standard Specification for Uranium Hexafluoride for Enrichment

1.1 This specification covers uranium hexafluoride (UF6) intended for feeding to an enrichment plant. Included are specifications for UF6 derived from unirradiated natural uranium and UF6 derived f...

Språk

Publicerad

2011-08-25
PDF · 468 SEK
ASTM D3562
Standard · ASTM ASTM D3562

Standard Performance Specification for Woven Drycleanable Coat Fabrics

1.1 This performance specification covers woven drycleanable topcoats, overcoats, and dress coat outer fabrics composed of any textile fiber or mixture of textile fibers. 1.2 This performance speci...

Språk

Publicerad

2005-09-01
PDF · 468 SEK
ASTM D2245
Standard · ASTM ASTM D2245

Standard Test Method for Identification of Oils and Oil Acids in Solvent-Reducible Paints

1.1 This test method covers the identification of oils and oil acids in vehicles that have been separated from solvent-reducible paints. The test method is based on a gas chromatographic technique...

Språk

Publicerad

2005-01-01
PDF · 468 SEK
ASTM F495
Standard · ASTM ASTM F495

Standard Test Method for Weight Loss of Gasket Materials Upon Exposure to Elevated Temperatures

D1.1 This test method covers the determination of gasket material weight loss upon exposure to elevated temperatures. 1.2 This test method may include hazardous materials, operations, and equipment...

Språk

Publicerad

2004-04-01
PDF · 468 SEK
ASTM D7143
Standard · ASTM ASTM D7143

Standard Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products

1.1 This practice is intended for determining volatile organic compound (VOC) emissions from materials and products using emission cells. It can be applied in principle to most construction materia...

Språk

Publicerad

2011-05-20
PDF · 767 SEK
ASTM D2207
Standard · ASTM ASTM D2207

Standard Test Method for Bursting Strength of Leather by the Ball Method

1.1 This test method covers the determination of the bursting strength of leather by the ball method. It may be used to test a large variety of leathers and leather products. It is particularly ap...

Språk

Publicerad

2005-04-01
PDF · 468 SEK
ASTM E2010
Standard · ASTM ASTM E2010

Standard Test Method for Positive Pressure Fire Tests of Window Assemblies (Withdrawn 2007)

1.1 This test method covers fire-test-response applicable to window assemblies, including glass block and other light transmitting assemblies, for use in walls or partitions to retard the passage o...

Språk

Publicerad

2001-10-10

Upphävd

2007-04-01
PDF · 533 SEK
ASTM E2397
Standard · ASTM ASTM E2397

Standard Practice for Determination of Dead Loads and Live Loads Associated with Vegetative (Green) Roof Systems

1.1 This practice covers a standardized procedure for predicting the system weight of a vegetative (green) roof system. 1.2 The practice addresses the loads associated with vegetative (green) roof ...

Språk

Publicerad

2011-09-16
PDF · 533 SEK
ASTM C1047
Standard · ASTM ASTM C1047

Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base

1.1 This specification covers accessories used in conjunction with assemblies of gypsum wallboard and gypsum veneer base to protect edges and corners and to provide architectural features (see Fig....

Språk

Publicerad

2010-08-20
PDF · 468 SEK
ASTM D5136
Standard · ASTM ASTM D5136

Standard Specification for High Purity p-Xylene

1.1 This specification covers high purity p-Xylene. 1.2 The following applies to all specified limits in this specification: for purposes of determining conformance with this specific Thi...

Språk

Publicerad

2009-06-01
PDF · 468 SEK
ASTM D2989
Standard · ASTM ASTM D2989

Standard Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and Their Admixtures

1.1 This test method covers the determination of acidity in halogenated organic solvents and admixtures thereof. The alkalinity may be determined utilizing Test Method <a href="http://myastm.as...

Språk

Publicerad

2006-06-01
PDF · 468 SEK
ASTM C534/C534M
Standard · ASTM ASTM C534/C534M

Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form

1.1 This specification covers preformed flexible elastomeric cellular thermal insulation in sheet and tubular form. Grade 1 covers materials to be used on commercial or industrial systems with oper...

Språk

Publicerad

2012-02-24
PDF · 533 SEK
ASTM D1203
Standard · ASTM ASTM D1203

Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods

1.1 These test methods cover the determination of volatile loss from a plastic material under defined conditions of time and temperature, using activated carbon as the immersion medium. 1.2 Two tes...

Språk

Publicerad

2011-04-15
PDF · 468 SEK
ASTM F1975
Standard · ASTM ASTM F1975

Standard Specification for Nonpowered Bicycle Trailers Designed for Human Passengers

1.1 This specification covers nonpowered trailers intended to be pulled behind bicycles in order to transport one or two children with accessory loads with a maximum weight of 45.4 kg (100 lb). It ...

Språk

Publicerad

2009-02-01
PDF · 533 SEK
ASTM G80
Standard · ASTM ASTM G80

Standard Test Method for Specific Cathodic Disbonding of Pipeline Coatings (Withdrawn 2007)

1.1 This test method covers an accelerated procedure for simultaneously determining comparative characteristics of insulating coating systems applied to steel pipe exterior for the purpose of preve...

Språk

Publicerad

1998-05-10

Upphävd

2007-03-21
PDF · 533 SEK
ASTM G188
Standard · ASTM ASTM G188

Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys

DESIG: G188 05 ^TITLE: Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys ^SCOPE:1. Scope 1.1 This specification covers the requirements for lea...

Språk

Publicerad

2005-10-01
PDF · 468 SEK
ASTM D5961/D5961M
Standard · ASTM ASTM D5961/D5961M

Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates

1.1 This test method covers the bearing response of pinned or fastened joints using multi-directional polymer matrix composite laminates reinforced by high-modulus fibers by double-shear tensile lo...

Språk

Publicerad

2011-04-15
PDF · 767 SEK
ASTM D7457
Standard · ASTM ASTM D7457

Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry

1.1 This test method covers the measurement of chloride in aromatic hydrocarbons, their derivatives, and related chemicals as defined by the method. Aromatics typically do not have any source of ch...

Språk

Publicerad

2012-03-23
PDF · 533 SEK
ASTM A421/A421M
Standard · ASTM ASTM A421/A421M

Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete

1.1 This specification covers two types of uncoated stress-relieved round high-carbon steel wire commonly used in prestressed linear concrete construction, as follows: 1.1.1 Ty This specificatio...

Språk

Publicerad

2011-03-18
PDF · 468 SEK
ASTM A348/A348M
Standard · ASTM ASTM A348/A348M

Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25...

1.1 This test method covers the determination of the magnetic properties of flat-rolled magnetic materials using Epstein test specimens with double-lap joints in the 25-cm Epstein frame. It covers ...

Språk

Publicerad

2005-11-01
PDF · 533 SEK
ASTM C1495
Standard · ASTM ASTM C1495

Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics

1.1&#x00a0;This test method covers the determination of the effect of surface grinding on the flexure strength of advanced ceramics. Surface grinding of an advanced ceramic material can

Språk

Publicerad

2007-03-14
PDF · 611 SEK
ASTM E1620
Standard · ASTM ASTM E1620

Standard Terminology Relating to Liquid Particles and Atomization

1.1 In a broad sense, this terminology covers terminology associated with liquid particles dispersed in gas. The principal emphasis, however, is on particles produced by the process of atomization....

Språk

Publicerad

2004-05-01
PDF · 533 SEK
Förfina din sökning genom att visa:
...som handlar om:

Ämnesområden (0)

Avbryt

Branscher (0)

Avbryt

Syfte (0)

Avbryt

Material (0)

Avbryt
Visa varukorgen Fortsätt handla 0
Varukorgen Stäng
Annonstext