21294 träffar på

ASTM D6432
Standard · ASTM ASTM D6432

Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation

1.1 Purpose and Application: 1.1.1 This guide covers the equipment, field procedures, and interpretation methods for the assessment of subsurface materials using the im

Språk

Publicerad

2011-09-16
PDF · 611 SEK
ASTM E288
Standard · ASTM ASTM E288

Standard Specification for Laboratory Glass Volumetric Flasks

1.1 This specification covers requirements for glass volumetric flasks of precision and general-purpose grades suitable for laboratory purposes. 1.1.1 Class A—

Språk

Publicerad

2010-05-17
PDF · 468 SEK
ASTM D6238
Standard · ASTM ASTM D6238

Standard Test Method for Total Oxygen Demand in Water

1.1 This test method covers the determination of total oxygen demand in the range from 100 to 100 000 mg/L, in water and wastewater including brackish waters and brines (see 6.5). Larger concentrat...

Språk

Publicerad

1998-03-10
PDF · 533 SEK
ASTM F1881
Standard · ASTM ASTM F1881

Standard Test Method for Measuring Baseball Bat Performance Factor

1.1 This test method defines a method for determining bat performance by measuring the bat-ball coefficient of restitution (BBCOR), deriving the bat performance factor (BPF), and calculating batted...

Språk

Publicerad

2012-02-24
PDF · 468 SEK
ASTM D3515
Standard · ASTM ASTM D3515

Standard Specification for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures (Withdrawn 2009)

1.1 This specification covers hot-mixed, hot-laid asphalt, tar, emulsified asphalt, and recycled bituminous paving mixtures for base, binder, leveling, and surface courses. 1.2 The values stated...

Språk

Publicerad

2001-06-10

Upphävd

2009-06-01
PDF · 533 SEK
ASTM E2382
Standard · ASTM ASTM E2382

Standard Guide to Scanner and Tip Related Artifacts in Scanning Tunneling Microscopy and Atomic Force Microscopy

1.1 All microscopes are subject to artifacts. The purpose of this document is to provide a description of commonly observed artifacts in scanning tunneling microscopy (STM) and ato

Språk

Publicerad

2004-08-01
PDF · 611 SEK
ASTM D5857
Standard · ASTM ASTM D5857

Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology

1.1 This specification covers polypropylene materials suitable for injection molding and extrusion. Polymers consist of polypropylene homopolymers, polypropylene copolymers, and polypropylene-elast...

Språk

Publicerad

2011-04-15
PDF · 767 SEK
ASTM A943/A943M
Standard · ASTM ASTM A943/A943M

Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes

1.1 This specification covers spray-formed seamless austenitic stainless steel pipe intended for high-temperature and general corrosive service. 1.2 Grades TP304H, TP309H, TP309HCb, TP310H, TP310...

Språk

Publicerad

2009-10-01
PDF · 533 SEK
ASTM A556/A556M
Standard · ASTM ASTM A556/A556M

Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes

1.1 This specification2 covers minimum-wall-thickness, seamless cold-drawn carbon steel tubes This specification covers minimum-wall-thickness, seamless cold-drawn carbon steel tubes inc...

Språk

Publicerad

2005-10-01
PDF · 533 SEK
ASTM E82
Standard · ASTM ASTM E82

Standard Test Method for Determining the Orientation of a Metal Crystal

1.1 This test method covers the back-reflection Laue procedure for determining the orientation of a metal crystal. The back-reflection Laue method for determining crystal orientation (1, 2) may b...

Språk

Publicerad

2009-10-01
PDF · 611 SEK
ASTM D3679
Standard · ASTM ASTM D3679

Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding

1.1 This specification establishes requirements and test methods for the materials, dimensions, warp, shrinkage, impact strength, expansion, appearance, and windload resistance of extruded single-...

Språk

Publicerad

2011-10-14
PDF · 533 SEK
ASTM E1395
Standard · ASTM ASTM E1395

Standard Test Method for Sensory Evaluation of Low Heat Chilies

1.1 This test method describes standardized procedures for the sensory evaluation of heat in low heat chili peppers ranging from 200 to 2500 Scoville heat units. 1.2 This test method is intended as...

Språk

Publicerad

2004-10-01
PDF · 468 SEK
ASTM D662
Standard · ASTM ASTM D662

Standard Test Method for Evaluating Degree of Erosion of Exterior Paints

1.1 This test method covers the evaluation of the degree of erosion of exterior paints by comparison with photographic standards.

Språk

Publicerad

2005-09-01
PDF · 468 SEK
ASTM D1304
Standard · ASTM ASTM D1304

Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation

1.1 These test methods cover procedures for testing adhesives in liquid, highly viscous, solid, or set states, that are intended to be cured by electronic heating, or that are inte

Språk

Publicerad

2005-04-01
PDF · 468 SEK
ASTM F2653
Standard · ASTM ASTM F2653

Standard Specification for Paintball Valve Male Threaded Connection for Use with Approved Cylinders

1.1 This specification covers the male threaded connection used to connect a CO2 Control Valve or Compressed Air Regulator with an output pressure of 10 342 kPa (1800 psig) or less for use with a ...

Språk

Publicerad

2011-09-16
PDF · 468 SEK
ASTM D4367
Standard · ASTM ASTM D4367

Standard Test Method for Benzene in Hydrocarbon Solvents by Gas Chromatography

1.1&#x00a0;This test method covers the determination by gas chromatography of benzene at levels from 0.01 to 1 volume&#8201;% in hydrocarbon solvents.<a

Språk

Publicerad

2007-09-05
PDF · 533 SEK
ASTM D3724
Standard · ASTM ASTM D3724

Standard Specification for Synthetic Brown Iron Oxide Pigment

1.1 This specification covers the pigments commercially known as synthetic pure brown iron oxides and blends. These pigments are suitable for use in paints and coatings. Methods of manuf This speci...

Språk

Publicerad

2008-01-09
PDF · 468 SEK
ASTM D889
Standard · ASTM ASTM D889

Standard Test Method for Volatile Oil in Rosin

1.1 This test method covers the determination of the volatile oil content of rosin or similar material. The oil may consist of naturally occurring terpene oil, such as heavy fractions of turpent...

Språk

Publicerad

2004-06-01
PDF · 468 SEK
ASTM B230/B230M
Standard · ASTM ASTM B230/B230M

Standard Specification for Aluminum 1350&#x2013;H19 Wire for Electrical Purposes

1.1&#x00a0;This specification covers aluminum 1350&#x2013;H19 (extra hard) round wire for electrical purposes. This specification covers the standard requirements for aluminum 1350-H19, e...

Språk

Publicerad

2007-06-11
PDF · 533 SEK
ASTM E2304
Standard · ASTM ASTM E2304

Standard Practice for Use of a LiF Photo-Fluorescent Film Dosimetry System

1.1 This practice covers the handling, testing, and procedure for using a lithium fluoride (LiF)-based photo-fluorescent film dosimetry system to measure absorbed dose (relative to water) in materi...

Språk

Publicerad

2003-07-10
PDF · 533 SEK
ASTM F494
Standard · ASTM ASTM F494

Standard Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners

1.1 These test methods cover the evaluation of the integrity of the primary disposable bag used for vacuum cleaners. 1.2 The intent of these test methods is to verify that the design of the primary...

Språk

Publicerad

2005-04-01
PDF · 533 SEK
ASTM D3307
Standard · ASTM ASTM D3307

Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials

1.1 This specification covers melt processable molding and extrusion materials of PFA-perfluoro(alkoxy alkane) fluorocarbon resin. The materials are copolymers of TFE-fluorocarbon resins containing...

Språk

Publicerad

2010-09-17
PDF · 533 SEK
ASTM D5344
Standard · ASTM ASTM D5344

Standard Test Method for Extension Force of Partially Oriented Yarn

1.1 This test method covers the measurement of extension force developed while drawing a partially oriented filament yarn between pairs of draw rolls of different surface speeds. 1.2 Extension forc...

Språk

Publicerad

2005-04-01
PDF · 533 SEK
ASTM A721/A721M
Standard · ASTM ASTM A721/A721M

Standard Test Method for Ductility of Oriented Electrical Steel

1.1 This test method covers determination of the ductility of grain-oriented silicon steel by use of an apparatus known variously as a tinner's brake, hand folder, or an apron brake. 1.2 The values...

Språk

Publicerad

2011-10-01
PDF · 468 SEK
ASTM F859
Standard · ASTM ASTM F859

Standard Specification for Heat-Sanitizing Commercial Dishwashing Machines, Multiple Tank, Conveyor Rack Type

1.1 This specification covers multiple tank automatic rack-type commercial dishwashing machines. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parent...

Språk

Publicerad

2009-10-01
PDF · 533 SEK
ASTM A858/A858M
Standard · ASTM ASTM A858/A858M

Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service

1.1 This specification covers heat-treated wrought carbon steel piping fittings with lowered carbon content of seamless and electric fusion-welded construction covered by the latest revisions in AS...

Språk

Publicerad

2010-06-18
PDF · 533 SEK
ASTM D1684
Standard · ASTM ASTM D1684

Standard Practice for Lighting Cotton Classing Rooms for Color Grading

1.1 This practice covers practices in general use in the United States for lighting cotton classing rooms, provides general background information regarding the development and establishment of the...

Språk

Publicerad

2007-01-01
PDF · 468 SEK
ASTM F1718
Standard · ASTM ASTM F1718

Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps

1.1&#x00a0;This specification covers the requirements applicable to the design and construction of rotary positive displacement distillate fuel pumps for shipboard use. This specification cover...

Språk

Publicerad

2001-06-10
PDF · 533 SEK
ASTM D2354
Standard · ASTM ASTM D2354

Standard Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles (Withdrawn 2007)

1.1 This test method covers the determination of the minimum temperature at which emulsion vehicles coalesce to form continuous films. The term "emulsion" in this test method includes latex vehicle...

Språk

Publicerad

1998-10-10

Upphävd

2007-03-20
PDF · 468 SEK
ASTM D4137
Standard · ASTM ASTM D4137

Standard Practice for Preserving Phytoplankton Samples

1.1&#x00a0;This practice describes the proper procedure for preserving phytoplankton samples with either formaldehyde or Lugol&#x0027;s solution <p

Språk

Publicerad

2004-04-01
PDF · 468 SEK
Förfina din sökning genom att visa:
...som handlar om:

Ämnesområden (0)

Avbryt

Branscher (0)

Avbryt

Syfte (0)

Avbryt

Material (0)

Avbryt
Visa varukorgen Fortsätt handla 0
Varukorgen Stäng
Annonstext