1.1 This practice identifies and describes equipage and procedures for safely handling unmanned aircraft forced to recover at alternate or diversionary airfields where personnel trained in recoveri...
2010-06-15
1.1 The Behind-the-Knee (BTK) method, using the popliteal fossa of human volunteers as a test site, simultaneously evaluates the inherent chemical irritation, and the potential for mechanical irrit...
2011-05-20
1.1 This specification covers the retained sewn seam strength of flame resistant fabric subassemblies after repeated short duration exposures to hot air or repeated short-duration exposures to ho...
2010-05-01
1.1 This guide provides recommended minimum requirements for various types of fences for non-residential outdoor swimming pools, hot tubs and spas. 1.2 The various types of fences may be chain link...
2010-04-01
1.1 This specification describes a data file exchange format for three-dimensional (3D) imaging data, known as the ASTM E57 3D file format, Version 1.0. The term “E57 file”T...
1.1 This specification covers nails, spikes, staples, and other driven fasteners, as listed in Table 1. Note 1—Fastener ductility information is presented in Table 2 and This specificat...
1.1 This test method describes the calibration or performance confirmation of the electronic pressure signals from thermal analysis apparatus. 1.2 The values stated in SI units are to be regarded a...
2012-02-24
1.1 This practice sets forth minimum criteria and evaluation requirements for products employing the use of different systems to trace wood fiber to sources operating under different forest managem...
1.1 This test method describes a means to determine the percentage of processing, potential, and total volatiles from radiation curable acrylate monomers, oligomers, and blends. The results can be ...
1.1 This specification covers polyolefin chopped strands (fibers) for use in concrete. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The va...
2010-06-01
1.1 This laboratory practice covers the quantitative determination of surface deposits produced during the thermal oxidation of gas turbine fuels by monitoring the oscillation frequency of a quartz...
1.1 This practice provides the procedure for using the impulse-response method to evaluate rapidly the condition of concrete slabs, pavements, bridge decks, walls, or other plate-like structures. 1...
2010-12-15
1.1 This test method covers the determination of the permeability of a PM bearing when subjected to pressurized nitrogen under controlled conditions. 1.2 The values stated in SI units are to be reg...
1.1 This guide provides a compendium of information and a menu of options for assessment of fungal growth in buildings, but does not recommend a specific course of action. Due to the wide variety o...
2010-12-01
1.1 This practice covers and provides instructions on making a volumetric blend of denatured fuel ethanol with gasoline blendstocks, such as a reformulated gasoline blendstock for oxygenate blendin...
1.1 Purpose: 1.1.1 The purpose of this test method, as a part of a suite of mobility test methods, is to quantitatively evaluate a teleoperated ground robot<span
1.1 This test method is designed to evaluate decontamination methods (physical, chemical, self-decontaminating materials) when used on surfaces contaminated with virus-containing droplets. 1.2 This...
2010-10-01
1.1 This test method covers the determination of distribution coefficients of chemical species to quantify uptake onto solid materials by a batch sorption technique. It is a laboratory method prima...
1.1 This test method covers monitoring nitration in gasoline and natural gas engine oils as well as in other types of lubricants where nitration by-products may form due to the combustion proces...
2010-08-01
1.1 This practice covers the minimum elements for the accurate location and description of geospatial data for defining Abandoned Mine Land (AML) Problem Areas, Planning Units, Keyword Features, an...
1.1 This guide covers the FT-IR fingerprinting of a liquid paint as supplied in the container without the need to separate components. Spectra collected using this technique have been found useful ...
1.1 This test method covers the on-line and in-line determination of dissolved ozone (DO3) in low conductivity water in the range from 0.001 mg/L to 5.0 mg/L DO3 and conductivity < 1
1.1 This specification covers information on and the test method for determining the purity, sex ratio, and number of live adults present in commercial containers of Delphastus catalinae (Horn), a ...
1.1 This specification covers crosslinked polyethylene (PEX) push-fit mechanical fittings for use with crosslinked polyethylene (PEX) tubing in ½, ¾, 1 and 1 This specificati...
1.1 This practice is used to determine grain size from measurements of grain areas from automated electron backscatter diffraction (EBSD) scans of polycrystalline materials. 1.2 The intent of this...
1.1 This guide is intended to provide a standardized method and a set of basic instructions for performing internal and hydrostatic pressure testing on packaging designs. 1.2 This guide provides in...
2010-08-15
1.1 This specification covers requirements and test methods for triple profile wall polyethylene pipe and fittings. The nominal inside diameters covered are 30 to 60 in. [750 to 1500 mm]. 1.2 The r...
1.1 Purpose: 1.1.1 The purpose of this test method, as a part of a suite of mobility test methods, is to quantitatively evaluate a teleoperated ground robot<span class=
1.1 Purpose—This practice establishes lot or batch sampling plans and procedures for inspection by variables using MIL-STD-414 as a basis for sampling a steady stream of lots ind
2010-11-01