21325 träffar på

Standard · ASTM ASTM D6805

Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/Aliphatic Ratio of Bituminous Emulsions

1.1 This practice uses infrared analytical techniques to qualitatively determine in the laboratory a ratio of aromatic absorbance to aliphatic absorbance. This practice may be used to determine if ...

Språk

Publicerad

2008-12-01

PDF · 533 SEK

Standard · ASTM ASTM E1935

Standard Test Method for Calibrating and Meausring CT Density

1.1 This test method covers instruction for determining the density calibration of X- and γ-ray computed tomography (CT) systems and for using this information to measure material densitie...

Språk

Publicerad

2008-12-15

PDF · 533 SEK

Standard · ASTM ASTM D3299

Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

1.1 This specification covers cylindrical tanks fabricated by filament winding for above-ground vertical installation, to contain aggressive chemicals at atmospheric pressure as classified herein, ...

Språk

Publicerad

2000-03-10

Upphävd

2008-11-15

PDF · 611 SEK

Standard · ASTM ASTM D4477

Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit

1.1 This specification establishes requirements and test methods for the materials, dimensions, camber, impact strength, expansion, and appearance of extruded single-wall soffit manufactured from r...

Språk

Publicerad

2004-11-01

Upphävd

2008-12-15

PDF · 468 SEK

Standard · ASTM ASTM D5050

Standard Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts

1.1 This guide is intended to evaluate and describe lime kiln dusts and Portland cement kiln dusts for uses in commercial applications. This guide is not intended to cover uses for lime or Portland...

Språk

Publicerad

2007-05-09

Upphävd

2008-11-15

PDF · 468 SEK

Standard · ASTM ASTM F2215

Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications

1.1 This specification covers requirements for ferrous and nonferrous inch balls. The balls covered in this specification are intended for use in bearings, bearing applications, check valves, and o...

Språk

Publicerad

2005-05-01

Upphävd

2008-12-01

PDF · 767 SEK

Standard · ASTM ASTM D187

Standard Test Method for Burning Quality of Kerosine

1.1 This test method covers the qualitative determination of the burning properties of kerosine to be used for illuminating purposes. (Warning—Combustible. Vapor harmful.)Note 1&#8212...

Språk

Publicerad

2003-11-01

Upphävd

2008-12-01

PDF · 468 SEK

Standard · ASTM ASTM D1552

Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)

p id="s00002">1.1 This test method covers three procedures for the determination of total sulfur in petroleum products including lubricating oils containing additives, and in additive concentrat...

Språk

Publicerad

2008-03-12

Upphävd

2008-12-01

PDF · 533 SEK

Standard · ASTM ASTM D2827

Standard Specification for Styrene Monomer

1.1 This specification covers styrene monomer. 1.2 Consult current OSHA regulations and supplier's Material Safety Data Sheets for all materials used in this specification. 1.3 The following app...

Språk

Publicerad

2004-08-01

Upphävd

2008-12-01

PDF · 468 SEK

Standard · ASTM ASTM D3134

Standard Practice for Establishing Color and Gloss Tolerances

1.1 This practice describes a procedure for establishing tolerances and evaluating the color and gloss of specimens with respect to specified standards. This practice is appropriate for nonfluoresc...

Språk

Publicerad

2008-12-01

PDF · 533 SEK

Standard · ASTM ASTM D3228

Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method

1.1 This test method covers the determination of nitrogen in lubricating oils when present in the concentration from 0.03 to 0.10 mass %, and for the determination of nitrogen in fuel oils when pre...

Språk

Publicerad

2005-11-01

Upphävd

2008-12-01

PDF · 533 SEK

Standard · ASTM ASTM D5287

Standard Practice for Automatic Sampling of Gaseous Fuels

1.1 This practice covers the collection of natural gases and their synthetic equivalents using an automatic sampler.1.2 This practice applies only to single-phase gas mixtures that vary in composit...

Språk

Publicerad

1997-06-10

Upphävd

2008-12-01

PDF · 533 SEK

Standard · ASTM ASTM D7229

Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of th...

1.1 This test method concerns the preparation and compaction of cylindrical specimens of dense-graded cold mix asphalt (CMA) using the Superpave gyratory compactor (SGC).1.2 This test method is app...

Språk

Publicerad

2006-07-01

Upphävd

2008-12-01

PDF · 468 SEK

Standard · ASTM ASTM C348

Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars

1.1 This test method covers the determination of the flexural strength of hydraulic-cement mortars.1.2 The values stated in SI units are to be regarded as the standard. The values shown in parenthe...

Språk

Publicerad

2002-06-10

Upphävd

2008-12-01

PDF · 533 SEK

Standard · ASTM ASTM C349

Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)

1.1 This test method covers the determination of the compressive strength of hydraulic-cement mortars, using for the test specimens portions of prisms made and broken in flexure in accordance with ...

Språk

Publicerad

2002-06-10

Upphävd

2008-12-01

PDF · 468 SEK

Standard · ASTM ASTM C430

Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve

1.1 This test method covers the determination of the fineness of hydraulic cement by means of the 45-μm (No. 325) sieve.1.2 The values stated in SI units are to be regarded as the standard...

Språk

Publicerad

2003-06-10

Upphävd

2008-12-01

PDF · 468 SEK

Standard · ASTM ASTM C688

Standard Specification for Functional Additions for Use in Hydraulic Cements

1.1 This specification covers methods to investigate the effectiveness of a material to beneficially change the properties of hydraulic cements when the material is interground with the clinker dur...

Språk

Publicerad

2005-07-01

Upphävd

2008-12-01

PDF · 533 SEK

Standard · ASTM ASTM C1105

Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction

1.1 This test method covers the determination, by measurement of length change of concrete prisms, the susceptibility of cement-aggregate combinations to expansive alkali-carbonate reaction involvi...

Språk

Publicerad

2005-05-01

Upphävd

2008-12-01

PDF · 468 SEK

Standard · ASTM ASTM F1004

Standard Consumer Safety Specification for Expansion Gates and Expandable Enclosures

1.1 This consumer safety specification covers minimum safety performance requirements, test methods, and requirements for labeling and instructional material to minimize hazards to young children r...

Språk

Publicerad

2007-05-09

Upphävd

2009-09-01

PDF · 611 SEK

Standard · ASTM ASTM D445

Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

Språk

Publicerad

2006-01-01

Upphävd

2009-09-01

PDF · 533 SEK

Standard · ASTM ASTM E90

Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements

Språk

Publicerad

2004-01-01

Upphävd

2009-09-01

PDF · 611 SEK

Standard · ASTM ASTM F833

Standard Consumer Safety Performance Specification for Carriages and Strollers

1.1 This consumer safety specification establishes safety performance requirements, test methods, and labeling requirements to minimize the hazards to children presented by carriages and strollers ...

Språk

Publicerad

2009-08-20

Upphävd

2009-09-01

PDF · 611 SEK

Standard · ASTM ASTM D1751

Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous ...

1.1 This specification covers preformed expansion joint filler having relatively little extrusion and substantial recovery after release from compression.1.2 The values stated in inch-pound units a...

Språk

Publicerad

2008-12-01

PDF · 468 SEK

Standard · ASTM ASTM C785

Standard Specification for Nuclear-Grade Aluminum Oxide Pellets

1.1 This specification applies to pellets of aluminum oxide that may be ultimately used in a reactor core, for example, as filler or spacers within fuel, burnable poison, or control rods. In order ...

Språk

Publicerad

2008-12-01

PDF · 468 SEK

Standard · ASTM ASTM D1752

Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction

1.1 This specification covers preformed expansion joint fillers of the following four types for use in concrete, brick, or stone construction.1.1.1 Type I—Sponge rubber.1.1.2 Type II&...

Språk

Publicerad

2008-12-01

PDF · 468 SEK

Standard · ASTM ASTM D6639

Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Investigations

1.1 Purpose and Application1.1.1 This standard guide summarizes the equipment, field procedures, and interpretation methods for the assessment of subsurface conditions using the frequency domain el...

Språk

Publicerad

2008-12-01

PDF · 611 SEK

Standard · ASTM ASTM C888

Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder

1.1 This specification provides the chemical and physical requirements for nuclear-grade gadolinium oxide powder intended for subsequent processing and use in nuclear fuel applications, for example...

Språk

Publicerad

2008-12-01

PDF · 468 SEK

Standard · ASTM ASTM C1110

Standard Practice for Sample Preparation for X-Ray Emission Spectrometric Analysis of Uranium in Ores Using the Glass Fusion or Pressed Powder Method

1.1 This practice covers the preparation of uranium ore samples to be analyzed by X-ray emission. Two separate techniques, the glass fusion method or the pressed powder method, may be used. 1.2 Th...

Språk

Publicerad

2008-12-01

PDF · 468 SEK

Standard · ASTM ASTM C1344

Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Mass Spectrometer Method

1.1 This test method covers the isotopic analysis of uranium hexafluoride (UF6) and may be used for the entire range of 235U isotopic compositions for which standards are available.1.2 This test me...

Språk

Publicerad

2008-12-01

PDF · 533 SEK

Standard · ASTM ASTM C1077

Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation

1.1 This practice identifies and defines the duties, responsibilities, and minimum technical requirements of testing laboratory personnel and the minimum technical requirements for laboratory equi...

Språk

Publicerad

2008-11-01

Upphävd

2008-12-01

PDF · 533 SEK

Förfina din sökning genom att visa:

...som handlar om: