21297 träffar på

ASTM D6041
Standard · ASTM ASTM D6041

Standard Specification for Contact-Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings

1.1 This specification covers pipe and fittings fabricated by contact molding, for pressures to 150 psi and made of a commercial-grade polyester resin. Included are requirements for materials, prop...

Språk

Publicerad

2002-11-10
PDF · 533 SEK
ASTM D6819
Standard · ASTM ASTM D6819

Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus

1.1 This test method describes a laboratory procedure for accelerating the aging of printing and writing paper within sealed glass tubes through exposure to elevated temperature within an oven.1.2 ...

Språk

Publicerad

2002-08-10

Upphävd

2007-12-01
PDF · 468 SEK
ASTM D6819
Standard · ASTM ASTM D6819

Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus

1.1 This test method describes a laboratory procedure for accelerating the aging of printing and writing paper within sealed glass tubes through exposure to elevated temperature within an oven. 1.2...

Språk

Publicerad

2008-02-06
PDF · 468 SEK
ASTM E595
Standard · ASTM ASTM E595

Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment

1.1 This test method covers a screening technique to determine volatile content of materials when exposed to a vacuum environment. Two parameters are measured: total mass loss (TML) and collected v...

Språk

Publicerad

2006-11-01

Upphävd

2007-12-01
PDF · 533 SEK
ASTM E595
Standard · ASTM ASTM E595

Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment

1.1 This test method covers a screening technique to determine volatile content of materials when exposed to a vacuum environment. Two parameters are measured: total mass loss (TML) and collected v...

Språk

Publicerad

2008-02-06
PDF · 533 SEK
ASTM F1578
Standard · ASTM ASTM F1578

Standard Practice for Contact Closure Cycling of a Membrane Switch

1.1 This practice covers the setup, procedure, and apparatus required to depress and release a membrane switch to a predetermined number of cycles. 1.2 This practice also covers the optional use ...

Språk

Publicerad

2001-06-10

Upphävd

2007-12-01
PDF · 468 SEK
ASTM F1578
Standard · ASTM ASTM F1578

Standard Test Method for Contact Closure Cycling of a Membrane Switch

1.1 This test method covers the setup, procedure, and apparatus required to depress and release a membrane switch to a predetermined number of cycles. 1.2 This test method also covers the optional...

Språk

Publicerad

2008-02-06
PDF · 468 SEK
ASTM F1596
Standard · ASTM ASTM F1596

Standard Practice for Exposure of Membrane Switches to Temperature and Relative Humidity

1.1 This practice covers a procedure for temperature and humidity cycling of membrane switches. 1.2 This practice is designed to determine changes induced by temperature and humidity. 1.3 This ...

Språk

Publicerad

2005-05-01

Upphävd

2007-12-01
PDF · 468 SEK
ASTM F1596
Standard · ASTM ASTM F1596

Standard Test Method for Exposure of Membrane Switches to Temperature and Relative Humidity

^SCOPE: 1.1 This test method covers a procedure for temperature and humidity cycling of membrane switches. 1.2 This test method is performed to evaluate the properties of materials used in the con...

Språk

Publicerad

2008-02-06
PDF · 468 SEK
ASTM D2890
Standard · ASTM ASTM D2890

Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels

1.1 This test method describes the calculation of liquid heat capacity, Btu/lb · °F (kJ/kg K), at atmospheric pressure, of petroleum fuels for which distillation data may be obt...

Språk

Publicerad

2003-05-10
PDF · 468 SEK
ASTM D4866
Standard · ASTM ASTM D4866

Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeri...

1.1 This performance specification covers mixtures of emulsified coal-tar pitch (mineral colloid type), mineral aggregates, and optional polymeric admixtures that are used as a weather-protective a...

Språk

Publicerad

2003-07-10
PDF · 468 SEK
ASTM E1347
Standard · ASTM ASTM E1347

Standard Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry

1.1 This test method describes the instrumental measurement of specimens resulting in color coordinates and color difference values by using a tristimulus (filter) colorimeter, also known as a colo...

Språk

Publicerad

2003-07-10

Upphävd

2006-12-01
PDF · 468 SEK
ASTM D5640
Standard · ASTM ASTM D5640

Standard Guide for Selection of Weirs and Flumes for Open-Channel Flow Measurement of Water

1.1 This guide covers recommendations for the selection of weirs and flumes for the measurement of the volumetric flow rate of water and wastewater in open channels under a variety of field conditi...

Språk

Publicerad

2008-10-01
PDF · 533 SEK
ASTM D6750
Standard · ASTM ASTM D6750

Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine-1K Procedure (0.4 % Fuel Sulfur) and 1N Procedur...

1.1 These test methods cover the performance of engine oils intended for use in certain diesel engines. They are performed in a standardized high-speed, single-cylinder diesel engine by either the ...

Språk

Publicerad

2006-11-01

Upphävd

2008-10-15
PDF · 923 SEK
ASTM D7359
Standard · ASTM ASTM D7359

Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustio...

1.1 This test method covers the individual determination of total fluorine, chlorine and sulfur in aromatic hydrocarbons and their mixtures. Samples containing 0.1 to 50 mg/kg of each element can b...

Språk

Publicerad

2009-01-15
PDF · 533 SEK
ASTM E1369
Standard · ASTM ASTM E1369

Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems

1.1 This guide recommends techniques for treating uncertainty in input values to an economic analysis of a building investment project. It also recommends techniques for evaluating the risk that a ...

Språk

Publicerad

2002-10-10

Upphävd

2007-04-01
PDF · 611 SEK
ASTM ANSI/ISO10651.4
Standard · ASTM ASTM ANSI/ISO10651.4

Lung Ventilators

This European Standard specifies requirements for operator-powered resuscitators intended for use with all age groups and which are portable and intended to provide lung ventilation to individuals ...

Språk

Publicerad

2007-05-09
PDF · 767 SEK
ASTM D6181
Standard · ASTM ASTM D6181

Standard Test Method for Measurement of Turbidity in Mineral Insulating Oil of Petroleum Origin

1.1 This test method covers the laboratory procedure that ascertains the quantity of suspensions in insulating oils of petroleum origin using a nephelometric measurement technique to determine the ...

Språk

Publicerad

2003-10-01
PDF · 533 SEK
ASTM E1796
Standard · ASTM ASTM E1796

Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings

1.1 This guide is intended to provide building users such as private building owners, contractors, architects, homeowners, and regulatory authorities with assistance in selecting an appropriate liq...

Språk

Publicerad

2003-10-01
PDF · 533 SEK
ASTM A934/A934M
Standard · ASTM ASTM A934/A934M

Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars

1.1 This specification covers deformed and plain steel reinforcing bars which prior to surface preparation are prefabricated and then coated with a protective fusion-bonded epoxy coating by electro...

Språk

Publicerad

2004-03-01

Upphävd

2007-09-01
PDF · 611 SEK
ASTM D4494
Standard · ASTM ASTM D4494

Standard Test Method for Detecting Residual Odor of Drycleaning Grade Perchloroethylene

1.1 This test method covers the detection of a residual odor in drycleaning-grade perchloroethylene.1.2 This standard does not purport to address all of the safety concerns, if any, associated with...

Språk

Publicerad

2004-05-01
PDF · 468 SEK
ASTM D2844
Standard · ASTM ASTM D2844

Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils

1.1 This test method covers the procedure for testing both treated and untreated laboratory compacted soils or aggregates with the stabilometer and expansion pressure devices to obtain results indi...

Språk

Publicerad

2001-11-10

Upphävd

2007-02-01
PDF · 533 SEK
ASTM D4770/D4770M
Standard · ASTM ASTM D4770/D4770M

Standard Test Method for Appearance and Integrity of Highloft Batting After Refurbishing

1.1 This test method covers procedures for determining the tactile appearance and integrity of a highloft nonwoven batting after machine washing or drycleaning when tested in a finished product or ...

Språk

Publicerad

2007-01-01
PDF · 468 SEK
ASTM D5076
Standard · ASTM ASTM D5076

Standard Test Method for Measuring Voids in Roofing and Waterproofing Membranes

1.1 This test method includes two procedures for measuring the area of voids in the adhesive between materials used in roofing and waterproofing systems. Both procedures require a count of the numb...

Språk

Publicerad

2006-12-01
PDF · 468 SEK
ASTM F584
Standard · ASTM ASTM F584

Standard Practice for Visual Inspection of Semiconductor Lead-Bonding Wire

1.1 This practice covers conditions for nondestructive visual inspection of the surface finish of spooled aluminum and gold wire used for making internal semiconductor device connections and hybrid...

Språk

Publicerad

2006-01-01
PDF · 533 SEK
ASTM D6761
Standard · ASTM ASTM D6761

Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers

1.1 This test method covers the determination of the total pore volume of catalysts and catalyst carriers, that is, the volume of pores having pore diameter between approximately 14 m and 0.4 nm (4...

Språk

Publicerad

2004-10-01

Upphävd

2007-05-01
PDF · 533 SEK
ASTM D6298
Standard · ASTM ASTM D6298

Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface

1.1 This specification covers fiberglass reinforced modified bituminous sheet materials that use styrene-butadiene-styrene (SBS) thermoplastic elastomer as the primary modifier and are surfaced wit...

Språk

Publicerad

2005-09-01
PDF · 468 SEK
ASTM A1013
Standard · ASTM ASTM A1013

Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Am...

1.1 This test method covers the equipment, procedures, and measurement of core loss of either toroidal or mated soft magnetic core components, such as soft ferrite cores, iron powder cores, and so ...

Språk

Publicerad

2005-11-01
PDF · 468 SEK
ASTM B438/B438M
Standard · ASTM ASTM B438/B438M

Specification for Bronze Powder Metallurgy (P/M) Bearing (Oil-Impregnated)

1.1 This specification covers sintered bronze, oil-impregnated bearings made primarily from elemental copper, tin, lead, and graphite powders. The manufacturer may, at his discretion, use prealloye...

Språk

Publicerad

2005-11-01
PDF · 533 SEK
ASTM D5731
Standard · ASTM ASTM D5731

Standard Test Method for Determination of the Point Load Strength Index of Rock

1.1 This test method covers the guidelines, requirements, and procedures for determining the point load strength index of rock. Specimens in the form of rock cores, blocks, or irregular lumps can b...

Språk

Publicerad

2005-11-01

Upphävd

2007-02-01
PDF · 533 SEK
Förfina din sökning genom att visa:
...som handlar om:

Ämnesområden (0)

Avbryt

Branscher (0)

Avbryt

Syfte (0)

Avbryt

Material (0)

Avbryt
Visa varukorgen Fortsätt handla 0
Varukorgen Stäng
Annonstext