21305 träffar på

Standard · ASTM ASTM D6753 Standard Specification for Coal Tar Adhesive 1.1 This specification covers coal tar adhesive with or without polymer modification suitable for brush, spray, squeegee and trowel application to coal tar built up and coal tar modified bitumen me... Språk Publicerad 2008-05-01

PDF · 468 SEK

Standard · ASTM ASTM F2275 Standard Practice for Treestand Manufacturer Quality Assurance Program 1.1 This practice provides minimum requirements for a quality assurance program. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the re Språk Publicerad 2008-05-14

PDF · 468 SEK

Standard · ASTM ASTM D6034 Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping ... 1.1 This test method describes an analytical procedure for determining the hydraulic efficiency of a production well in a confined aquifer. It involves comparing the actual drawdown in the well to... Språk Publicerad 2004-11-01

PDF · 533 SEK

Standard · ASTM ASTM C1539 Standard Test Method for Determination of Technetium-99 in Uranium Hexafluoride by Liquid Scintillation Counting 1.1 This test method is a quantitative method used to determine technetium-99 (99Tc) in uranium hexafluoride (UF6) by liquid scintillation counting. 1.2 The values stated in SI units are to be regard Språk Publicerad 2008-11-05

PDF · 468 SEK

Standard · ASTM ASTM D5441 Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography 1.1 This test method covers the determination of the purity of methyl tert-butyl ether (MTBE) by gas chromatography. It also provides a procedure to measure impurities in MTBE such as C4 to C12 o... Språk Publicerad 2008-05-01

PDF · 533 SEK

Standard · ASTM ASTM F1279 Standard Guide for Ecological Considerations for the Restriction of the Use of Surface Washing Agents: Permeable Land Surfaces 1.1 This guide covers the use of surface washing agents to assist in the control of oil spills. The guide is written with the goal of minimizing the environmental impacts of oil spills; this goal i... Språk Publicerad 2008-12-03

PDF · 468 SEK

Standard · ASTM ASTM C585 Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing 1.1 This practice is intended as a dimensional standard for preformed thermal insulation for pipes and tubing. 1.2 This practice covers insulation supplied in cylindrical sections and lists recomme... Språk Publicerad 2009-04-01

PDF · 611 SEK

Standard · ASTM ASTM D49 Standard Test Methods of Chemical Analysis of Red Lead 1.1 These test methods cover procedures for the chemical analysis of red lead having the approximate formula Pb3O4 (probably PbO2·2PbO). 1.2 The value These test methods cover procedur... Språk Publicerad 2008-07-01

PDF · 468 SEK

Standard · ASTM ASTM E699 Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components 1.1 This practice provides a guide for the information to be obtained and provides specific recommended criteria for evaluating the capabilities of an agency to conduct inspections and tests and to... Språk Publicerad 2003-06-10

PDF · 533 SEK

Standard · ASTM ASTM D3939 Standard Test Method for Snagging Resistance of Fabrics (Mace) 1.1 This test method determines the snagging resistance of a fabric. 1.2 Studies of fabric snagging have shown that this test method is suitable for a range of woven and knitted fabrics made from t... Språk Publicerad 2008-07-01

PDF · 533 SEK

Standard · ASTM ASTM F2337 Standard Test Method for Treestand Fall Arrest System 1.1 This test method covers the determination of the load capacities for treestand fall arrest systems (FAS) and components or subsystems. 1.2 This test method addresses equipment used in hunting s... Språk Publicerad 2008-05-14

PDF · 468 SEK

Standard · ASTM ASTM D81 Standard Specification for Basic Carbonate White Lead Pigment 1.1 This specification covers the material commercially known as basic carbonate white lead, used as a pigment and in putty. The pigment may be purchased in the dry form or as a paste in oil. ... Språk Publicerad 2008-07-01

PDF · 468 SEK

Standard · ASTM ASTM F2259 Standard Test Method for Determining the Chemical Composition and Sequence in Alginate by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy 1.1 This test method covers the determination of the composition and monomer sequence of alginate intended for use in biomedical and pharmaceutical applications as well as in Tissue Engineered Medi... Språk Publicerad 2008-05-01

PDF · 533 SEK

Standard · ASTM ASTM A603 Standard Specification for Zinc-Coated Steel Structural Wire Rope 1.1 This specification covers zinc-coated steel structural wire rope, prestretched or nonprestretched for use where a high-strength, relatively flexible prefabricated zinc-coated multiple-wire tens... Språk Publicerad 2003-04-10

PDF · 533 SEK

Standard · ASTM ASTM F1280 Standard Guide for Ecological Considerations for the Use of Surface Washing Agents: Impermeable Surfaces 1.1 This guide covers the use of surface washing agents to assist in the cleanup of oil spills. This guide is written with the goal of minimizing the environmental impacts of oil spills; this goal... Språk Publicerad 2008-12-03

PDF · 468 SEK

Standard · ASTM ASTM C612 Standard Specification for Mineral Fiber Block and Board Thermal Insulation 1.1 This specification covers the classification, composition, dimension, and physical properties of mineral fiber (rock, slag, or glass) semi-rigid and rigid board intended for the use as thermal ... Språk Publicerad 2009-09-01

PDF · 533 SEK

Standard · ASTM ASTM D83 Standard Specification for Red Lead Pigment 1.1 This specification covers four grades of red pigment commercially known as red lead. The pigment may be purchased in the dry form or as a paste in oil. 1.2 The values stated in inch-pound u... Språk Publicerad 2008-07-01

PDF · 468 SEK

Standard · ASTM ASTM D2494 Standard Test Method for Commercial Mass of a Shipment of Yarn or Manufactured Staple Fiber or Tow 1.1 This test method provides a measurement of the commercial mass of a shipment of yarn or manufactured staple fiber or tow. This test method applies to (1) yarn of all fiber types except silk, gl... Språk Publicerad 2002-09-10

PDF · 533 SEK

Standard · ASTM ASTM D7076 Standard Test Method for Measurement of Shives in Retted Flax 1.1 This test method covers the measurement of shives in retted flax. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. ... Språk Publicerad 2009-07-01

PDF · 468 SEK

Standard · ASTM ASTM D5092 Standard Practice for Design and Installation of Ground Water Monitoring Wells 1.1 This practice describes a methodology for designing and installing conventional (screened and filter-packed) groundwater monitoring wells suitable for formations ranging from unconsolidated aqu... Språk Publicerad 2004-01-01

PDF · 611 SEK

Standard · ASTM ASTM D2255 Standard Test Method for Grading Spun Yarns for Appearance 1.1 This test method covers the grading of singles spun yarns for appearance.1.2 This test method does not apply to plied yarns.1.3 The values stated in either inch-pound or SI units are to be rega... Språk Publicerad 2002-09-10

PDF · 533 SEK

Standard · ASTM ASTM B940 Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces 1.1 This practice covers a procedure for evaluating the protective value of chemical and electrochemical conversion coatings produced by non-chromate (chromate being defined as a compound that has... Språk Publicerad 2005-10-01

PDF · 468 SEK

Standard · ASTM ASTM D267 Standard Specification for Gold Bronze Powder 1.1 This specification covers the materials commercially known as gold bronze, pale gold bronze, and rich gold bronze powders. 1.2 The values stated in inch-pound units are to be regarded as stan... Språk Publicerad 2008-07-01

PDF · 468 SEK

Standard · ASTM ASTM D7460 Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending 1.1 This test method provides procedures for determining a unique failure point for estimating the fatigue life of 380 mm (14.96 in.) long by 50 mm (1.97 in.) thick by 63 mm (2.48 in.) wide asphalt... Språk Publicerad 2008-09-03

PDF · 611 SEK

Standard · ASTM ASTM D5581 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen) 1.1 This test method covers the measurement of the resistance to plastic flow of cylindrical specimens of bituminous paving mixture loaded on the lateral surface by means of the Marshall apparatus.... Språk Publicerad 2007-10-10

PDF · 533 SEK

Standard · ASTM ASTM F366 Standard Specification for Fixation Pins and Wires 1.1 This specification covers functional dimensions for fixation pins and wires. 1.2 In recognition of many broad and varied uses of such pins and wires, many options are included. A variety, but n... Språk Publicerad 2009-04-01

PDF · 468 SEK

Standard · ASTM ASTM C210 Standard Test Method for Reheat Change of Insulating Firebrick 1.1 This test method covers the determination of the permanent linear (and volume) change of insulating firebrick upon reheating under prescribed conditions.1.2 The values stated in inch-pound unit... Språk Publicerad 2007-05-09

PDF · 468 SEK

Standard · ASTM ASTM E1739 Standard Guide for Risk-Based Corrective Action Applied at Petroleum Release Sites 1.1 This is a guide to risk-based corrective action (RBCA), which is a consistent decision-making process for the assessment and response to a petroleum release, based on the protection of human h... Språk Publicerad 1995-09-10

PDF · 858 SEK

Standard · ASTM ASTM C561 Standard Test Method for Ash in a Graphite Sample 1.1 This test method provides a practical determination for the ash content in a graphite sample. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement ar... Språk Publicerad 2005-06-01

PDF · 468 SEK

Standard · ASTM ASTM D946 Standard Specification for Penetration-Graded Asphalt Cement for Use in Pavement Construction 1.1 This specification covers asphalt cement for use in the construction of pavements. 1.2 This specification covers the following penetration grades:This specification covers the standard for asph... Språk Publicerad 2009-07-01

PDF · 468 SEK

• < Föregående
• 219
• 220
• 221
• 222
• 223
• 224
• 225
• 226
• 227
• 228
• Nästa >