21317 träffar på

ASTM D4095
Standard · ASTM ASTM D4095

Standard Practice for Use of the Refractometer for Determining Nonvolatile Matter (Total Solids) in Floor Polishes

1.1 This practice covers the use of a refractometer for determining the nonvolatile matter (total solids) in floor polishes. This practice is also applicable to resin solutions and wax emulsions us...

Språk

Publicerad

2008-03-01
PDF · 468 SEK
ASTM G127
Standard · ASTM ASTM G127

Standard Guide for the Selection of Cleaning Agents for Oxygen Systems

1.1 The purpose of this guide is to establish a procedure to select cleaning agents, both solvents and water-based detergents, for oxygen service. This includes of laboratory-scale tests for cleani...

Språk

Publicerad

2008-04-01
PDF · 468 SEK
ASTM B482
Standard · ASTM ASTM B482

Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating

1.1 This practice makes recommendations of several reported practices for electroplating on tungsten and its alloys along with comments as a guide in the selection of a processing method for a give...

Språk

Publicerad

2008-08-01
PDF · 468 SEK
ASTM D2603
Standard · ASTM ASTM D2603

Test Method for Sonic Shear Stability of Polymer-Containing Oils

1.1 This test method covers the evaluation of the shear stability of an oil containing polymer in terms of the permanent loss in viscosity that results from irradiating a sample of the oil in a son...

Språk

Publicerad

2007-09-05
PDF · 468 SEK
ASTM D3277
Standard · ASTM ASTM D3277

Standard Test Methods for Moisture Content of Oil-Impregnated Cellulosic Insulation (Withdrawn 2010)

1.1 These test methods cover the determination of the weight percent of water in new or aged, oil-impregnated electrical insulation. These test methods depend on solvent extraction of the water at ...

Språk

Publicerad

1995-06-15

Upphävd

2010-02-01
PDF · 468 SEK
ASTM D6202
Standard · ASTM ASTM D6202

Standard Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIA Spark Ignition Engi...

1.1 This test method covers an engine test procedure for the measurement of the effects of automotive engine oils on the fuel economy of passenger cars and light-duty 3856 kg (8500 lb), or less, gr...

Språk

Publicerad

2002-06-10

Upphävd

2009-10-01
PDF · 1.027 SEK
ASTM D7053
Standard · ASTM ASTM D7053

Standard Guide for Determining and Evaluating Causes of Water Leakage of Low-Sloped Roofs

1.1 This guide describes methods for determining and evaluating causes of water leakage in low-sloped roofs. For this purpose, water penetration is considered leakage and therefore problematic, is ...

Språk

Publicerad

2007-10-10
PDF · 533 SEK
ASTM D1146
Standard · ASTM ASTM D1146

Standard Test Method for Blocking Point of Potentially Adhesive Layers

1.1 This test method covers the determination of the blocking point of a thermoplastic or a hygroscopic layer or coating of potentially adhesive material. Potentially adhesive materials comprise th...

Språk

Publicerad

2007-09-05
PDF · 468 SEK
ASTM C1256
Standard · ASTM ASTM C1256

Standard Practice for Interpreting Glass Fracture Surface Features

1.1 Fracture features on the surface of a crack reflect the nature and course of the fracture event associated with the breakage of a glass object. This practice is a guide to the identification an...

Språk

Publicerad

2008-04-01
PDF · 533 SEK
ASTM E1964
Standard · ASTM ASTM E1964

Standard Practice for Compiling and Writing & Terminology (Withdrawn 2007)

1.1 This practice describes a systematic procedure for compiling and writing a terminology. 1.2 This practice is intended to provide a systematic procedure for compiling and presenting a terminolog...

Språk

Publicerad

1998-07-10

Upphävd

2007-01-31
PDF · 533 SEK
ASTM E618
Standard · ASTM ASTM E618

Standard Test Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine

1.1 This test method covers a production-type test for evaluating the machining performance of ferrous metals as they are used in single-spindle or multiple-spindle automatic screw machines. It is ...

Språk

Publicerad

2007-09-05
PDF · 611 SEK
ASTM D6304
Standard · ASTM ASTM D6304

Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration

1.1 This test method covers the direct determination of water in the range of 10 to 25 000 mg/kg entrained water in petroleum products and hydrocarbons using automated instrumentation. This test me...

Språk

Publicerad

2007-10-10
PDF · 533 SEK
ASTM D5357
Standard · ASTM ASTM D5357

Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction

1.1 This test method covers a procedure for determining the relative crystallinity of zeolite sodium A (zeolite NaA) using selected peaks from the X-ray diffraction pattern of the zeolite. 1.2 The...

Språk

Publicerad

2008-04-01
PDF · 468 SEK
ASTM D4215
Standard · ASTM ASTM D4215

Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures

1.1 This specification covers cold-mixed, cold-laid and recycled cold-mixed, cold-laid bituminous paving mixtures for base, binder, leveling, and surface courses. This specification covers cold-mix...

Språk

Publicerad

2007-10-10
PDF · 468 SEK
ASTM C324
Standard · ASTM ASTM C324

Standard Test Method for Free Moisture in Ceramic Whiteware Clays

1.1 This test method covers the determination of free moisture in ceramic whiteware clays. Whiteware clays may be shipped as a bulk shipment in lumps, a bulk shipment of shredded or coarsely ground...

Språk

Publicerad

2007-09-05
PDF · 468 SEK
ASTM E1202
Standard · ASTM ASTM E1202

Standard Guide for Development of Micronucleus Assay Standards

1.1 This guide covers minimal criteria which should be met by a micronucleus assay system prior to the development of an ASTM Standard or Guide for the conduct of that assay. 1.2 This standard does no

Språk

Publicerad

2008-08-01
PDF · 468 SEK
ASTM F2582
Standard · ASTM ASTM F2582

Standard Test Method for Impingement of Acetabular Prostheses

1.1 This test method covers a procedure for measuring the range of motion, impingement, and dislocation of a femoral head assembly and acetabular prosthesis. 1.2 This test method covers the procedu...

Språk

Publicerad

2008-10-08
PDF · 533 SEK
ASTM F1262M
Standard · ASTM ASTM F1262M

Standard Guide for Transient Radiation Upset Threshold Testing of Digital Integrated Circuits (Metric)

1.1 This guide is to assist experimenters in measuring the transient radiation upset threshold of silicon digital integrated circuits exposed to pulses of ionizing radiation greater than 103 Gy (Si...

Språk

Publicerad

2008-06-15
PDF · 533 SEK
ASTM C155
Standard · ASTM ASTM C155

Standard Classification of Insulating Firebrick

1.1 This classification covers heat insulating material known as insulating firebrick. This material is suitable for lining certain kinds of industrial furnaces.Note 1—Insulating material...

Språk

Publicerad

2007-05-09
PDF · 468 SEK
ASTM E190
Standard · ASTM ASTM E190

Standard Test Method for Guided Bend Test for Ductility of Welds

1.1 This test method covers a guided bend test for the determination of soundness and ductility of welds in ferrous and nonferrous products. Defects, not shown by X rays, may appear in the surface...

Språk

Publicerad

2008-09-01
PDF · 468 SEK
ASTM E2275
Standard · ASTM ASTM E2275

Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance

1.1 This practice addresses the evaluation of the relative inherent bioresistance of water-miscible metalworking fluids, the bioresistance attributable to augmentation with antimicrobial pesticides...

Språk

Publicerad

2008-04-01
PDF · 533 SEK
ASTM D4356
Standard · ASTM ASTM D4356

Standard Practice for Establishing Consistent Test Method Tolerances (Withdrawn 2007)

1.1 This practice should be used in the development of any test method in which the determination value is calculated from measurement values by means of an equation. The practice is not applicable...

Språk

Publicerad

1984-03-30

Upphävd

2007-10-01
PDF · 611 SEK
ASTM D2562
Standard · ASTM ASTM D2562

Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics

1.1 This practice covers acceptance criteria for visual inspection of parts molded from reinforced thermosetting plastics by compression and transfer molding. 1.2 This practice presents word descr...

Språk

Publicerad

2008-08-01
PDF · 533 SEK
ASTM E1454
Standard · ASTM ASTM E1454

Standard Guide for Data Fields for Computerized Transfer of Digital Ultrasonic Testing Data

1.1 This guide provides a listing and description of the fields that are recommended for inclusion in a digital ultrasonic examination data base to facilitate the transfer of such data. This guide ...

Språk

Publicerad

2008-07-01
PDF · 533 SEK
ASTM E2581
Standard · ASTM ASTM E2581

Standard Practice for Shearography of Polymer Matrix Composites, Sandwich Core Materials and Filament-Wound Pressure Vessels in Aerospace Applications

1.1 This practice describes procedures for shearography of polymer matrix composites, sandwich core materials, and filament-wound pressure vessels made entirely or in part from fiber-reinforced pol...

Språk

Publicerad

2007-11-07
PDF · 611 SEK
ASTM E2551
Standard · ASTM ASTM E2551

Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers

1.1 This test method describes the humidity calibration (or conformance) of humidity generators for use with thermogravimetric analyzers and other thermal analysis apparatus. The humidity range cov...

Språk

Publicerad

2007-09-05
PDF · 533 SEK
ASTM F1837M
Standard · ASTM ASTM F1837M

Standard Specification for Heat-Shrink Cable Entry Seals (Metric)

1.1 This specification covers the general requirements for heat-shrink cable entry seals. Cable entry seals are intended for making electrical cable penetrations into connection boxes, bulkheads, o...

Språk

Publicerad

2007-09-05
PDF · 533 SEK
ASTM F2633
Standard · ASTM ASTM F2633

Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants

1.1 This specification covers the requirements for wrought nickel-titanium shape memory alloy tube, nominally 54.5 % to 57.0 mass/mass (weight) % nickel, in the superelastic condition, used for the...

Språk

Publicerad

2007-09-05
PDF · 533 SEK
ASTM D709
Standard · ASTM ASTM D709

Standard Specification for Laminated Thermosetting Materials

1.1 This specification covers laminated thermosetting materials consisting of two or more plies or layers of reinforcing material bonded by a thermosetting synthetic resin. Examples of such reinfor...

Språk

Publicerad

2007-09-05
PDF · 767 SEK
ASTM E69
Standard · ASTM ASTM E69

Standard Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus

1.1 This test method covers fire-tube test procedures for fire tests for combustible properties of wood treated to reduce flammability. This test method relates to properties of treated wood, as su...

Språk

Publicerad

2007-05-09
PDF · 533 SEK
Förfina din sökning genom att visa:
...som handlar om:

Ämnesområden (0)

Avbryt

Branscher (0)

Avbryt

Syfte (0)

Avbryt

Material (0)

Avbryt
Visa varukorgen Fortsätt handla 0
Varukorgen Stäng
Annonstext