21363 träffar på

Standard · ASTM ASTM A951/A951M

Standard Specification for Steel Wire for Masonry Joint Reinforcement

1.1 This specification covers masonry joint reinforcement fabricated from cold-drawn steel wire. Joint reinforcement consists of longitudinal wires welded to cross wires. 1.2 The values stated in i...

Språk

Publicerad

2006-09-01

Upphävd

2011-10-01

PDF · 533 SEK

Standard · ASTM ASTM A1060/A1060M

Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete

1.1 This specification covers zinc-coated steel welded wire reinforcement, plain and deformed, or a combination of deformed and plain wires, for reinforcement of concrete, in sizes not less than 0....

Språk

Publicerad

2010-09-17

Upphävd

2011-10-01

PDF · 468 SEK

Standard · ASTM ASTM B965

Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability

1.1 This specification covers tin-coated annealed copper wire intended for electrical and electronic applications where solderability is a requirement. 1.2 The values stated in inch-pound units are...

Språk

Publicerad

2009-04-01

PDF · 533 SEK

Standard · ASTM ASTM B96/B96M

Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels

1.1 This specification establishes the requirements for copper-silicon alloy plate, sheet, strip, and rolled bar for drawing, forming, stamping, bending, and general engineering applications, and f...

Språk

Publicerad

2006-03-15

Upphävd

2011-10-01

PDF · 468 SEK

Standard · ASTM ASTM B111/B111M

Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock

1.1 This specification establishes the requirements for seamless tube and ferrule stock of copper and various copper alloys up to 31/8 in. [80 mm] inclusive, in diameter, for use in surface conden...

Språk

Publicerad

2009-01-15

Upphävd

2009-04-01

PDF · 611 SEK

Standard · ASTM ASTM B111/B111M

Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock

1.1 This specification establishes the requirements for seamless tube and ferrule stock of copper and various copper alloys up to 31/8 in. [80 mm] inclusive, in diameter, for use in surface conden...

Språk

Publicerad

2008-05-14

Upphävd

2009-04-01

PDF · 611 SEK

Standard · ASTM ASTM B111/B111M

Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock

1.1 This specification establishes the requirements for seamless tube and ferrule stock of copper and various copper alloys up to 31/8 in. [80 mm] inclusive, in diameter, for use in surface conden...

Språk

Publicerad

2009-04-01

Upphävd

2011-10-01

PDF · 611 SEK

Standard · ASTM ASTM B117

Standard Practice for Operating Salt Spray (Fog) Apparatus

1.1 This practice covers the apparatus, procedure, and conditions required to create and maintain the salt spray (fog) test environment. Suitable apparatus which may be used is described in Appendi...

Språk

Publicerad

2008-03-12

Upphävd

2009-07-01

PDF · 533 SEK

Standard · ASTM ASTM B117

Standard Practice for Operating Salt Spray (Fog) Apparatus

Språk

Publicerad

2007-05-09

Upphävd

2007-03-01

PDF · 533 SEK

Standard · ASTM ASTM B121/B121M

Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar

1.1 This specification establishes the requirements for copper-zinc-lead alloys (leaded brass) plate, sheet, strip, and rolled bar. The following alloys are covered:1.2 The values stated in either ...

Språk

Publicerad

2006-02-01

Upphävd

2011-10-01

PDF · 468 SEK

Standard · ASTM ASTM B122/B122M

Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Roll...

1.1 This specification establishes the requirements for copper-nickel-tin alloy, copper-nickel-zinc alloy (nickel silver), and copper-nickel alloy plate, sheet, strip, and rolled bar. The followin...

Språk

Publicerad

2008-05-14

Upphävd

2011-10-01

PDF · 533 SEK

Standard · ASTM ASTM B159/B159M

Standard Specification for Phosphor Bronze Wire

1.1 This specification establishes the requirements for round, square and flat phosphor bronze wire of UNS Alloy Nos. C51000, C52100, and C52400 for general and spring applications.1.1.1 Rectangula...

Språk

Publicerad

2005-05-01

Upphävd

2011-10-01

PDF · 468 SEK

Standard · ASTM ASTM B232/B232M

Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)

1.1 This specification covers concentric-lay-stranded conductors made from round aluminum 1350-H19 (extra hard) wires and round, coated steel core wire(s) for use as overhead electrical conductors...

Språk

Publicerad

2009-08-01

Upphävd

2011-10-01

PDF · 611 SEK

Standard · ASTM ASTM B417

Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel

1.1 This test method covers a procedure for determining the apparent density of non-free-flowing metal powders. It is designed for those metal powders that do not freely flow through the Hall flowm...

Språk

Publicerad

2006-04-01

Upphävd

2011-10-01

PDF · 468 SEK

Standard · ASTM ASTM B423

Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and Tube

1.1 This specification covers nickel-iron-chromium-molybdenum-copper alloys (UNS N08825 and N08221)* in the form of cold-worked and hot-finished seamless pipe and tube intended for general c...

Språk

Publicerad

2009-10-01

Upphävd

2011-10-01

PDF · 468 SEK

Standard · ASTM ASTM B424

Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, and Strip

1.1 This specification covers rolled nickel-iron-chromium-molybdenum-copper alloy (UNS N08825 and UNS N08221)* plate, sheet, and strip. 1.2 The values stated in inch-pound units are to be ...

Språk

Publicerad

2009-10-01

Upphävd

2011-10-01

PDF · 468 SEK

Standard · ASTM ASTM B453/B453M

Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes

1.1 This specification establishes the requirements for copper-zinc-lead alloy (leaded-brass) rod, bar, wire, and shapes produced from Copper Alloys UNS Nos. C33500, C34000, C34500, C35000, C35300,...

Språk

Publicerad

2005-10-01

Upphävd

2011-10-01

PDF · 533 SEK

Standard · ASTM ASTM B465

Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar

1.1 This specification establishes Copper Alloy UNS Nos. C19200, C19210, C19400, C19500, C19700, and C19720 plate, sheet, strip, and rolled bar. 1.2 Units—Valu This specification establis...

Språk

Publicerad

2009-10-01

Upphävd

2011-10-01

PDF · 533 SEK

Standard · ASTM ASTM B505/B505M

Standard Specification for Copper Alloy Continuous Castings

1.1 This specification establishes requirements for continuously cast rod, bar, tube, and shapes produced from copper alloys with nominal compositions as listed in Table 1. 1.2 Castings produced t...

Språk

Publicerad

2008-10-15

Upphävd

2010-04-01

PDF · 533 SEK

Standard · ASTM ASTM B505/B505M

Standard Specification for Copper Alloy Continuous Castings

1.1 This specification establishes requirements for continuously cast rod, bar, tube, and shapes produced from copper alloys with nominal compositions as listed in Table 1. 1.2 Castings produced t...

Språk

Publicerad

2008-05-14

Upphävd

2010-04-01

PDF · 533 SEK

Standard · ASTM ASTM B505/B505M

Standard Specification for Copper Alloy Continuous Castings

1.1 This specification establishes requirements for continuously cast rod, bar, tube, and shapes produced from copper alloys with nominal compositions as listed in Table 1. 1.2 Castings produced t...

Språk

Publicerad

2010-05-17

Upphävd

2011-10-01

PDF · 533 SEK

Standard · ASTM ASTM B592

Standard Specification for Copper-Zinc-aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar

1.1 This specification covers the requirements for plate, sheet, strip, and rolled bar in alloys C66300 and C68800.Note 1Since alloy C68800 is frequently used in a variety of applications where yie...

Språk

Publicerad

2006-02-01

Upphävd

2011-10-01

PDF · 468 SEK

Standard · ASTM ASTM B608

Standard Specification for Welded Copper-Alloy Pipe

1.1 This specification establishes the requirements for arc-welded pipe for use in brackish water or seawater piping systems.1.2 Units - The values stated in inch-pound units are regarded as the st...

Språk

Publicerad

2007-12-05

Upphävd

2011-10-01

PDF · 533 SEK

Standard · ASTM ASTM B747

Standard Specification for Copper-Zirconium Alloy Sheet and Strip

1.1 This specification establishes the requirements for sheet and strip of Copper Alloy UNS C15100.1.2 Values stated in inch-pound units are the standard. SI values given in parentheses are for inf...

Språk

Publicerad

2007-12-05

Upphävd

2011-10-01

PDF · 533 SEK

Standard · ASTM ASTM B768

Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet

1.1 This specification establishes the requirements for copper-cobalt-beryllium and copper-nickel-beryllium strip and sheet. The following alloys are covered:1.2 The values stated in inch-pound uni...

Språk

Publicerad

2004-05-01

Upphävd

2011-10-01

PDF · 468 SEK

Standard · ASTM ASTM B830

Standard Specification for Uniform Test Methods and Frequency

1.1 This specification covers a standard basis for uniform testing and frequency to determine physical and electrical compliance for aluminum and copper drawing stock, and aluminum and copper condu...

Språk

Publicerad

2003-10-01

Upphävd

2011-10-01

PDF · 468 SEK

Standard · ASTM ASTM B944

Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)

1.1 This specification establishes the requirements for copper-beryllium alloy UNS No. C17510 welded tube in straight lengths.1.2 UnitsThe values stated in inch-pound units are to be regarded as st...

Språk

Publicerad

2006-02-01

Upphävd

2011-10-01

PDF · 533 SEK

Standard · ASTM ASTM C393/C393M

Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure

1.1 This test method covers determination of the core shear properties of flat sandwich constructions subjected to flexure in such a manner that the applied moments produce curvature of the sandwic...

Språk

Publicerad

2006-09-01

Upphävd

2011-10-01

PDF · 533 SEK

Standard · ASTM ASTM C896

Standard Terminology Relating to Clay Products

Språk

Publicerad

2009-10-01

Upphävd

2011-11-01

PDF · 468 SEK

Standard · ASTM ASTM C1283

Standard Practice for Installing Clay Flue Lining

1.1 This practice covers the minimum requirements for installing clay flue lining for residential concrete or masonry chimneys.1.2 The values stated in inch-pound units are to be regarded as the st...

Språk

Publicerad

2007-06-11

Upphävd

2007-04-01

PDF · 468 SEK

Förfina din sökning genom att visa:

...som handlar om: