21294 träffar på

Standard · ASTM ASTM D7717

Standard Practice for Preparing Volumetric Blends of Denatured Fuel Ethanol and Gasoline Blendstocks for Laboratory Analysis

1.1 This practice covers and provides instructions on making a volumetric blend of denatured fuel ethanol with gasoline blendstocks, such as a reformulated gasoline blendstock for oxygenate blendin...

Språk

Publicerad

2012-02-24

PDF · 468 SEK

Standard · ASTM ASTM E2829

Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Maneuvering Tasks: Sustained Speed

1.1 Purpose: 1.1.1 The purpose of this test method, as a part of a suite of mobility test methods, is to quantitatively evaluate a teleoperated ground robot<span

Språk

Publicerad

2012-02-24

PDF · 533 SEK

Standard · ASTM ASTM E2721

Standard Test Method for Evaluation of Effectiveness of Decontamination Procedures for Surfaces When Challenged with Droplets Containing Human Path...

1.1 This test method is designed to evaluate decontamination methods (physical, chemical, self-decontaminating materials) when used on surfaces contaminated with virus-containing droplets. 1.2 This...

Språk

Publicerad

2010-10-01

PDF · 533 SEK

Standard · ASTM ASTM C1733

Standard Test Method for Distribution Coefficients of Inorganic Species by the Batch Method

1.1 This test method covers the determination of distribution coefficients of chemical species to quantify uptake onto solid materials by a batch sorption technique. It is a laboratory method prima...

Språk

Publicerad

2012-02-24

PDF · 533 SEK

Standard · ASTM ASTM D7624

Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourie...

1.1 This test method covers monitoring nitration in gasoline and natural gas engine oils as well as in other types of lubricants where nitration by-products may form due to the combustion proces...

Språk

Publicerad

2010-08-01

PDF · 468 SEK

Standard · ASTM ASTM D7699/D7699M

Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Areas, Planning Units, Keyword Features, and Project Sites

1.1 This practice covers the minimum elements for the accurate location and description of geospatial data for defining Abandoned Mine Land (AML) Problem Areas, Planning Units, Keyword Features, an...

Språk

Publicerad

2011-05-20

PDF · 533 SEK

Standard · ASTM ASTM D7588

Standard Guide for FT-IR Fingerprinting of a Non-Aqueous Liquid Paint as Supplied in the Manufacturer's Container

1.1 This guide covers the FT-IR fingerprinting of a liquid paint as supplied in the container without the need to separate components. Spectra collected using this technique have been found useful ...

Språk

Publicerad

2012-02-24

PDF · 533 SEK

Standard · ASTM ASTM E2826

Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Terrains: Continuous Pitch/Roll Ramps

1.1 Purpose: 1.1.1 The purpose of this test method, as a part of a suite of mobility test methods, is to quantitatively evaluate a teleoperated ground robot<span

Språk

Publicerad

2012-02-24

PDF · 611 SEK

Standard · ASTM ASTM D7677

Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water

1.1 This test method covers the on-line and in-line determination of dissolved ozone (DO3) in low conductivity water in the range from 0.001 mg/L to 5.0 mg/L DO3 and conductivity < 1

Språk

Publicerad

2011-05-20

PDF · 533 SEK

Standard · ASTM ASTM E2754

Standard Specification for Delphastus catalinae (Horn) (Coleoptera:Coccinellidae)

1.1 This specification covers information on and the test method for determining the purity, sex ratio, and number of live adults present in commercial containers of Delphastus catalinae (Horn), a ...

Språk

Publicerad

2010-04-01

PDF · 468 SEK

Standard · ASTM ASTM F2854

Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing

1.1 This specification covers crosslinked polyethylene (PEX) push-fit mechanical fittings for use with crosslinked polyethylene (PEX) tubing in ½, ¾, 1 and 1 This specificati...

Språk

Publicerad

2011-05-20

PDF · 468 SEK

Standard · ASTM ASTM E2627

Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials

1.1 This practice is used to determine grain size from measurements of grain areas from automated electron backscatter diffraction (EBSD) scans of polycrystalline materials. 1.2 The intent of this...

Språk

Publicerad

2010-04-01

PDF · 468 SEK

Standard · ASTM ASTM D7660

Standard Guide for Conducting Internal Pressure Tests on United Nations (UN) Packagings

1.1 This guide is intended to provide a standardized method and a set of basic instructions for performing internal and hydrostatic pressure testing on packaging designs. 1.2 This guide provides in...

Språk

Publicerad

2010-08-15

PDF · 533 SEK

Standard · ASTM ASTM F2763

Standard Specification for 30 to 60 in. [750 to 1500 mm] Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications

1.1 This specification covers requirements and test methods for triple profile wall polyethylene pipe and fittings. The nominal inside diameters covered are 30 to 60 in. [750 to 1500 mm]. 1.2 The r...

Språk

Publicerad

2011-05-20

PDF · 533 SEK

Standard · ASTM ASTM E2802

Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Obstacles: Hurdles

1.1 Purpose: 1.1.1 The purpose of this test method, as a part of a suite of mobility test methods, is to quantitatively evaluate a teleoperated ground robot<span class=

Språk

Publicerad

2012-02-24

PDF · 533 SEK

Standard · ASTM ASTM E2762

Standard Practice for Sampling a Stream of Product by Variables Indexed by AQL

1.1 Purpose—This practice establishes lot or batch sampling plans and procedures for inspection by variables using MIL-STD-414 as a basis for sampling a steady stream of lots ind

Språk

Publicerad

2010-11-01

PDF · 1.027 SEK

Standard · ASTM ASTM D7678

Standard Test Method for Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy

1.1 This test method covers the determination of total petroleum hydrocarbons (TPH) in water, and waste water, that are extractable from an acidified sample with a cyclic aliphatic hydrocarbon (for...

Språk

Publicerad

2011-02-01

PDF · 533 SEK

Standard · ASTM ASTM E2749

Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens

1.1 This standard provides general principles for measuring the uniformity of the furnace exposure on specimens tested in accordance with Test Methods E119<

Språk

Publicerad

2010-04-01

PDF · 533 SEK

Standard · ASTM ASTM F2779

Standard Practice for Commercial Radial Truck-Bus Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Roadwheel and ...

1.1 This practice describes the procedure to identify equivalent test severity conditions between a 1.707-m diameter laboratory roadwheel surface and a flat or highway surface for commercial radial...

Språk

Publicerad

2010-04-01

PDF · 533 SEK

Standard · ASTM ASTM F2786

Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Media Under Pressure (Pneumatic Leak Testing)

1.1 This practice provides information on apparatus, safety, pre-test preparation and procedures for conducting field tests of polyethylene pressure piping systems after installation using gaseous ...

Språk

Publicerad

2010-02-01

PDF · 533 SEK

Standard · ASTM ASTM D528

Standard Test Method for Machine Direction of Paper and Paperboard (Withdrawn 2010)

1.1 This test method covers four procedures for determining the machine direction of most grades of paper and paperboard, embodying the principle that machine direction alignment of fibers results ...

Språk

Publicerad

2008-02-06

Upphävd

2010-02-01

PDF · 468 SEK

Standard · ASTM ASTM A1074

Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals

1.1 This specification covers tin and tin/lead coatings applied by the hot dip process on ferrous and non-ferrous metals. hot tin and tin/lead coatings are used to provide a low contact-resistance ...

Språk

Publicerad

2011-11-18

PDF · 533 SEK

Standard · ASTM ASTM D7740

Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubr...

1.1 This practice covers information on the calibration and operational guidance for elemental measurements using atomic absorption spectrometry (AAS). 1.1.1 AAS Related Standards&#821

Språk

Publicerad

2012-02-24

PDF · 533 SEK

Standard · ASTM ASTM E2739

Standard Specification for Personnel Decontamination System to be Used During a Chemical Event

1.1 This specification is used to standardize the personnel decontamination systems used by the Homeland Defense Community to ensure the system characteristics are matched to the Homeland Defense C...

Språk

Publicerad

2010-12-15

PDF · 468 SEK

Standard · ASTM ASTM E2750

Standard Guide for Extension of Data For Penetrations Seals

1.1 This guide covers the extension of results obtained from fire tests performed in accordance with Test Method E814 to applications that have not bee

Språk

Publicerad

2012-02-24

PDF · 533 SEK

Standard · ASTM ASTM D7683

Standard Test Method for Cloud Point of Petroleum Products (Small Test Jar Method)

1.1 This test method covers the determination of the cloud point of petroleum products, biodiesel, and biodiesel blends that are transparent in layers 40 mm in thickness, using an automatic instrum...

Språk

Publicerad

2012-02-24

PDF · 533 SEK

Standard · ASTM ASTM D7771

Standard Test Method for Determination of Benzo-α-Pyrene (BaP) Content in Carbon Black

1.1 This test method covers the qualitative and quantitative determination of only benzo-α-pyrene (BaP), a specific polycyclic aromatic hydrocarbon (PAH), on carbon black. The procedure ...

Språk

Publicerad

2012-02-24

PDF · 533 SEK

Standard · ASTM ASTM F2683

Standard Guide for Selection of Booms for Oil-Spill Response

1.1 This guide covers the selection of boom for the containment and recovery of marine oil spills. 1.2 This guide does not address the compatibility of spill-control equipment with spill products. ...

Språk

Publicerad

2012-02-24

PDF · 533 SEK

Standard · ASTM ASTM D7718

Standard Practice for Obtaining In-Service Samples of Lubricating Grease

1.1 This practice covers the method to obtain a trendable in-service lubricating grease sample from the following configurations including motor-operated valves, gearboxes, pillow-block bearings, e...

Språk

Publicerad

2012-02-24

PDF · 533 SEK

Standard · ASTM ASTM E2830

Standard Test Method for Evaluating the Mobility Capabilities of Emergency Response Robots Using Towing Tasks: Grasped Sleds

1.1 Purpose: 1.1.1 The purpose of this test method, as a part of a suite of mobility test methods, is to quantitatively evaluate a teleoperated ground robot<span

Språk

Publicerad

2012-02-24

PDF · 533 SEK

Förfina din sökning genom att visa:

...som handlar om:

21294 träffar på

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Upphävd

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Ämnesområden (0)

Branscher (0)

Syfte (0)

Material (0)