21327 träffar på

ASTM E1740
Standard · ASTM ASTM E1740

Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Compo...

1.1 This fire-test-response test method covers determination of the ignitability and heat release rate of composites consisting of a wall covering or ceiling covering, a substrate, and all laminat...

Språk

Publicerad

2010-10-15
PDF · 611 SEK
ASTM D4261
Standard · ASTM ASTM D4261

Standard Practice for Surface Cleaning Concrete Masonry Units for Coating

1.1 This practice covers surface cleaning of concrete masonry units to remove dust, dirt, mortar spatter, oil, and grease prior to the application of coatings. Procedures include vacuum cleaning, ...

Språk

Publicerad

2005-12-01
PDF · 468 SEK
ASTM D4481
Standard · ASTM ASTM D4481

Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts

1.1 This test method covers the determination of nickel in fresh alumina-base catalysts and has been tested at nickel concentrations from 2.5 to 60 weight %, expressed as nickel oxide (NiO). 1.2 Th...

Språk

Publicerad

2010-04-01
PDF · 468 SEK
ASTM E671
Standard · ASTM ASTM E671

Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus

1.1 This specification covers a limit for thermal residual stress in reusable annealed glass laboratory apparatus as determined by prescribed photoelastic measurement procedures. This specification...

Språk

Publicerad

2004-05-01
PDF · 468 SEK
ASTM F2510/F2510M
Standard · ASTM ASTM F2510/F2510M

Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage ...

1.1 This specification covers the design, material, and minimum performance requirements of resilient connectors used for connections between reinforced concrete structures conform This ...

Språk

Publicerad

2007-09-05
PDF · 468 SEK
ASTM F2108
Standard · ASTM ASTM F2108

Standard Practice for Inspection of Transparent Parts by Prism

1.1 Aerospace transparencies undergo high stresses induced by flight, environmental, or other factors. The transparency attachment points are especially subject to fatigue. These areas of fatigue a...

Språk

Publicerad

2006-11-01
PDF · 533 SEK
ASTM B582
Standard · ASTM ASTM B582

Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip

1.1 The specification2 covers plate, sheet, and strip of nickel-chromium-iron-molybdenum-copp This specification deals with the standard requirements for nickel-chromium-iron-molybdenum-...

Språk

Publicerad

2008-02-06
PDF · 468 SEK
ASTM E1307
Standard · ASTM ASTM E1307

Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Sh...

1.1 This practice covers the materials, processes, and quality controls to be used in the manufacture of durable adhesive bonded, nonmetallic faced, flat sandwich panels for rigid wall relocatable...

Språk

Publicerad

2011-05-20
PDF · 533 SEK
ASTM D4559
Standard · ASTM ASTM D4559

Standard Test Method for Volatile Matter in Silicone Fluid

1.1 This test method describes a procedure for determining the volatile matter in silicone fluids used for electrical insulation. 1.2 The values stated in SI units are to be regarded as standard. N...

Språk

Publicerad

2004-10-01
PDF · 468 SEK
ASTM F1397
Standard · ASTM ASTM F1397

Standard Test Method for Determination of Moisture Contribution by Gas Distribution System Components

1.1 This test method covers testing components for total moisture contribution to a gas distribution system at ambient temperature. In addition, the test method allows testing at e

Språk

Publicerad

1999-06-10
PDF · 611 SEK
ASTM C1618M
Standard · ASTM ASTM C1618M

Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure (Metric)

1.1&#x00a0;This test method covers procedures for testing of precast concrete pipe sections, prior to delivery, where maximum field leakage rates are specified. <div class="Sec

Språk

Publicerad

2005-05-01
PDF · 468 SEK
ASTM A975
Standard · ASTM ASTM A975

Standard Specification for Double&#x2013;Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Ste...

1.1 This specification covers gabions and revet matresses produced from double-twisted metallic-coated wire mesh, and metallic-coated wire for lacing wire, stiffeners, and fasteners used for manufa...

Språk

Publicerad

2012-02-24
PDF · 533 SEK
ASTM A470/A470M
Standard · ASTM ASTM A470/A470M

Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts

1.1 This specification covers vacuum-treated carbon and alloy steel forgings for turbine rotors and shafts. 1.2 The values stated in either SI units or inch-pound units are to be regarded separate...

Språk

Publicerad

2005-09-01
PDF · 533 SEK
ASTM C1167
Standard · ASTM ASTM C1167

Standard Specification for Clay Roof Tiles

1.1 This specification covers clay tiles intended for use as roof covering where durability and appearance are required to provide a weather-resistant surface of specified design. 1.2 Tiles are man...

Språk

Publicerad

2011-08-25
PDF · 533 SEK
ASTM D2556
Standard · ASTM ASTM D2556

Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties

1.1 This test method covers the measurement of the apparent viscosity of shear-rate-dependent adhesives. 1.2 The values stated in SI units are to be regarded as standard. The values given in parent...

Språk

Publicerad

2012-02-24
PDF · 468 SEK
ASTM C880/C880M
Standard · ASTM ASTM C880/C880M

Standard Test Method for Flexural Strength of Dimension Stone

1.1 This test method covers the procedure for determining the flexural strength of stone by use of a simple beam using quarter-point loading. 1.2 Stone tests shall be made when pertinent for the si...

Språk

Publicerad

2009-04-01
PDF · 468 SEK
ASTM D1946
Standard · ASTM ASTM D1946

Standard Practice for Analysis of Reformed Gas by Gas Chromatography

1.1 This practice covers the determination of the chemical composition of reformed gases and similar gaseous mixtures containing the following components: hydrogen, oxygen, nitrogen, carbon monoxid...

Språk

Publicerad

1990-03-30
PDF · 533 SEK
ASTM F1508
Standard · ASTM ASTM F1508

Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services

1.1 This specification covers spring-loaded, angle style, pressure relief valves for steam, gas, and liquid system applications (excluding boiler safety and hydraulic system relief valves). 1.2 T...

Språk

Publicerad

2004-05-01
PDF · 611 SEK
ASTM E959
Standard · ASTM ASTM E959

Standard Test Method for Characterizing the Performance of Refuse Size-Reduction Equipment

1.1 This test method covers measuring the performance of solid waste size reduction equipment. 1.2 This test method can be used to measure the flow (that is, throughput) of solid waste through the ...

Språk

Publicerad

2005-02-01
PDF · 533 SEK
ASTM C654
Standard · ASTM ASTM C654

Standard Specification for Porous Concrete Pipe

1.1 This specification covers porous nonreinforced concrete pipe for use in underdrains. 1.2 A complete metric companion to this specification has been developed 654M; therefore, no metric equivale...

Språk

Publicerad

2011-11-18
PDF · 468 SEK
ASTM D5750/D5750M
Standard · ASTM ASTM D5750/D5750M

Standard Guide for Width and Length of Pressure-Sensitive Tape

1.1 This guide provides guidelines for widths and lengths of pressure-sensitive tape, including tolerances and labeling in the inch-pound and SI systems. It is not intended for tapes used for medi...

Språk

Publicerad

2006-04-01
PDF · 468 SEK
ASTM F1722
Standard · ASTM ASTM F1722

Standard Test Method for Determining Mass and Moment of Inertia of Alpine Skis

1.1 This test method covers test measurement methods for mass and moment of inertia of adult Alpine skis. 1.2 No limitation to ski size is proposed. This test method is applicable to all adult Alp...

Språk

Publicerad

2009-06-01
PDF · 468 SEK
ASTM D490
Standard · ASTM ASTM D490

Standard Specification for Road Tar

1.1 This specification covers 14 grades of tar as follows: RT-1, RT-2, RT-3, RT-4, RT-5, RT-6, RT-7, RT-8, RT-9, RT-10, RT-11, RT-12, RT.C.B.-5, and RT.C.B.-6. This specification covers 14 grades ...

Språk

Publicerad

2005-12-01
PDF · 468 SEK
ASTM E388
Standard · ASTM ASTM E388

Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers ,

1.1 This test method covers the testing of the spectral bandwidth and wavelength accuracy of fluorescence spectrometers that use a monochromator for emission wavelength selection and photomultiplie...

Språk

Publicerad

2009-10-01
PDF · 468 SEK
ASTM E1215
Standard · ASTM ASTM E1215

Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness

1.1 This specification covers the design, performance, and operating features of a trailer used for measuring response to road roughness. This specification details the design, performance, and op...

Språk

Publicerad

1993-07-15
PDF · 468 SEK
ASTM E2059
Standard · ASTM ASTM E2059

Standard Practice for Application and Analysis of Nuclear Research Emulsions for Fast Neutron Dosimetry

1.1 Nuclear Research Emulsions (NRE) have a long and illustrious history of applications in the physical sciences, earth sciences and biological sciences (1,2) . In the physical sciences, NRE exper...

Språk

Publicerad

2006-01-01
PDF · 611 SEK
ASTM E1923
Standard · ASTM ASTM E1923

Standard Guide for Sampling Terrestrial and Wetlands Vegetation (Withdrawn 2013)

1.1 This guide covers environmental studies such as risk assessments, planning projects, or research typically including characterization of ecological resources. Compliance with federal statutes (...

Språk

Publicerad

2008-02-01

Upphävd

2013-03-19
PDF · 611 SEK
ASTM D945
Standard · ASTM ASTM D945

Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)

1.1&#x00a0;These test methods cover the use of the Yerzley mechanical oscillograph for measuring mechanical properties of rubber vulcanizates in the generally small range of deformation

Språk

Publicerad

2006-07-01
PDF · 611 SEK
ASTM F2281
Standard · ASTM ASTM F2281

Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications

1.1 This specification covers the chemical and mechanical requirements for stainless steel and nickel alloy bolts, hex cap screws, and studs, &#x00BC; in. diameter and larger, intended for use ...

Språk

Publicerad

2004-11-01
PDF · 533 SEK
ASTM D6585
Standard · ASTM ASTM D6585

Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape

1.1 This specification covers unsintered extruded films or tapes manufactured from virgin, unpigmented polytetrafluoroethylene, in nominal thickness from 0.025 to 0.51 mm (0.001 to 0.020 in.), whic...

Språk

Publicerad

2011-05-20
PDF · 468 SEK
Förfina din sökning genom att visa:
...som handlar om:

Ämnesområden (0)

Avbryt

Branscher (0)

Avbryt

Syfte (0)

Avbryt

Material (0)

Avbryt
Visa varukorgen Fortsätt handla 0
Varukorgen Stäng
Annonstext