21304 träffar på

Standard · ASTM ASTM D4790

Standard Terminology of Aromatic Hydrocarbons and Related Chemicals

Språk

Publicerad

2011-03-18

PDF · 533 SEK

Standard · ASTM ASTM B432

Standard Specification for Copper and Copper Alloy Clad Steel Plate

1.1 This specification establishes the requirements for plate of a carbon steel or low-alloy steel base to which is integrally and continuously bonded on one or both sides a layer of copper or copp...

Språk

Publicerad

2009-10-01

PDF · 533 SEK

Standard · ASTM ASTM D3429

Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids

1.1 This test method covers the determination of the solubilities of nonreactive gases such as nitrogen and helium in liquids that boil below 273 K. This test method is applicable at temperatures f...

Språk

Publicerad

2007-09-05

PDF · 533 SEK

Standard · ASTM ASTM D4468

Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry

1.1 This test method covers the determination of sulfur gaseous fuels in the range from 0.001 to 20 parts per million by volume (ppm/v).1.2 This test method may be extended to higher concentration ...

Språk

Publicerad

2006-06-01

PDF · 533 SEK

Standard · ASTM ASTM C1233

Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials

1.1 This standard details a recommended practice for the calculation of the Equivalent Boron Content (EBC) for nuclear materials. The EBC is used to provide a measure of the macroscopic neutron a...

Språk

Publicerad

2009-06-01

PDF · 468 SEK

Standard · ASTM ASTM D7183

Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence

1.1 This test method covers the determination of sulfur in aromatic hydrocarbons, their derivatives, and related chemicals. 1.2 This test method is applicable to samples with sulfur ...

Språk

Publicerad

2012-02-24

PDF · 468 SEK

Standard · ASTM ASTM A623M

Standard Specification for Tin Mill Products, General Requirements [Metric]

1.1 This specification covers a group of common requirements, which unless otherwise specified in the purchase order or in an individual specification, shall apply to tin mill products. 1.2 In case...

Språk

Publicerad

2011-11-18

PDF · 767 SEK

Standard · ASTM ASTM D7314

Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling

1.1 This practice is for the determination of the heating value measurement of gaseous fuels using a calorimeter. Heating value determination of sample gasses containing water vapor will require...

Språk

Publicerad

2010-01-01

PDF · 533 SEK

Standard · ASTM ASTM D3169

Standard Specification for Refined Sunflower Oil (Withdrawn 2007)

1.1 This specification covers once-refined sunflower oil, technical grade, suitable for use in protective coatings.

Språk

Publicerad

1989-10-27

Upphävd

2007-03-02

PDF · 468 SEK

Standard · ASTM ASTM D768

Standard Specification for Yellow Iron Oxide Hydrated

1.1 This specification covers the pigment commercially known as yellow iron oxide, hydrated. 1.2 The values stated in SI units ar This specification covers the pigment commercially known as yellow...

Språk

Publicerad

2008-01-09

PDF · 468 SEK

Standard · ASTM ASTM D3964

Standard Practice for Selection of Coating Specimens for Appearance Measurements

1.1 This practice provides a guide to selection of specimens for appearance measurement by reflected light as well as a discussion of factors to be considered in their preparation for measurement. ...

Språk

Publicerad

2010-08-20

PDF · 468 SEK

Standard · ASTM ASTM C385

Standard Test Method for Thermal Shock Resistance of Porcelain-Enameled Utensils

1.1 This test method covers the determination of the resistance of porcelain-enameled utensils to thermal shock. This test method is adaptable to any porcelain-enamel utensil that can be filled wit...

Språk

Publicerad

2004-08-01

PDF · 468 SEK

Standard · ASTM ASTM D6107

Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service

1.1 This specification covers the requirements of a stop-leak additive to function effectively in automobile and light duty service. The stop-leak is intended to seal small leaks in engi This speci...

Språk

Publicerad

2007-09-05

PDF · 468 SEK

Standard · ASTM ASTM E1704

Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures

1.1 The guide covers the development of criteria for the acoustical performance of a broad variety of acoustical enclosures by identifying information necessary to unambiguously describe acoustical...

Språk

Publicerad

1995-06-15

PDF · 533 SEK

Standard · ASTM ASTM E1657

Standard Practice for Testing Variable-Wavelength Photometric Detectors Used in Liquid Chromatography

1.1 This practice covers the testing of the performance of a variable-wavelength photometric detector (VWPD) used as the detection component of a liquid-chromatographic (LC) system operating at o...

Språk

Publicerad

2006-03-01

PDF · 533 SEK

Standard · ASTM ASTM D6059

Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron M...

1.1 This test method covers the sampling methods and analysis techniques used to assess the airborne concentration and size distribution of single-crystal ceramic whiskers (SCCW), such as silicon c...

Språk

Publicerad

2007-01-11

PDF · 533 SEK

Standard · ASTM ASTM C1621/C1621M

Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring

1.1 This test method covers determination of the passing ability of self-consolidating concrete by using the J-Ring in combination with a mold. 1.2 The values stated in either SI units or inch-poun...

Språk

Publicerad

2009-07-01

PDF · 533 SEK

Standard · ASTM ASTM C1461

Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sani...

1.1 This specification describes the properties of devices or assemblies suitable for use as mechanical couplings using thermoplastic elastomeric (TPE) gaskets, hereinafter referre This ...

Språk

Publicerad

2009-01-15

PDF · 468 SEK

Standard · ASTM ASTM C1469

Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature

1.1 This test method covers the determination of shear strength of joints in advanced ceramics at ambient temperature. Test specimen geometries, test specimen fabrication methods, testing modes (th...

Språk

Publicerad

2011-04-15

PDF · 533 SEK

Standard · ASTM ASTM D4826

Standard Practice for Units of Measurement and Conversion Factors for Pulp, Paper, and Paperboard (Withdrawn 2010)

1.1 This practice covers the application of the International System of Units (abbreviated SI) within the field of pulp, paper, and paperboard. The SI units have been adopted by ISO, ASTM, and TAPP...

Språk

Publicerad

2007-09-05

Upphävd

2010-05-01

PDF · 533 SEK

Standard · ASTM ASTM D3499

Standard Test Method for Toughness of Wood-Based Structural Panels

1.1 This test method for toughness of wood-based structural panels covers the determination of energy necessary to cause failure by impact loading of a beam specimen which is simply supported and l...

Språk

Publicerad

2011-09-16

PDF · 468 SEK

Standard · ASTM ASTM E2352

Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments-Cleanroom Operations

1.1 This practice specifies basic requirements, procedures, and practices for operating aerospace cleanrooms and controlled environments and precautions associated with the facility and equipment u...

Språk

Publicerad

2004-04-01

PDF · 611 SEK

Standard · ASTM ASTM C863

Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures

1.1 This test method covers the evaluation of the oxidation resistance of silicon carbide refractories at elevated temperatures in an atmosphere of steam. The steam is used to accelerate the test. ...

Språk

Publicerad

2005-12-01

PDF · 468 SEK

Standard · ASTM ASTM C1106

Standard Test Methods for Chemical Resistance and Physical Properties of Carbon Brick

1.1 These test methods are intended for use as short-term tests for evaluating the physical properties of carbon brick and their chemical resistance at various temperatures in imm

Språk

Publicerad

2005-04-01

PDF · 533 SEK

Standard · ASTM ASTM E2032

Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119

1.1 This guide covers the extension of fire resistance ratings obtained from fire tests performed in accordance with Test Method E 119 to constructions that have not been tested. Test Method E 119

Språk

Publicerad

2009-04-01

PDF · 533 SEK

Standard · ASTM ASTM D7161

Standard Practice for Determination of Real Time Expiration Dating of Mature Medical Gloves Stored Under Typical Warehouse Conditions

1.1 This practice covers all surgeon's and examination gloves, made from either synthetic or natural rubber latex, marketed at the time this practice is published, for which there is no previous re...

Språk

Publicerad

2005-06-15

PDF · 468 SEK

Standard · ASTM ASTM A972/A972M

Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles

1.1 This specification covers pipe piles with protective fusion-bonded epoxy powder coating applied by the electrostatic spray, flocking, or fluidized bed process. Note 1&#8212 This specifica...

Språk

Publicerad

2004-09-01

PDF · 468 SEK

Standard · ASTM ASTM D772

Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints

1.1 This test method covers the evaluation of the degree of flaking (scaling) of exterior paints by comparison with photographic standards. 1.2 The values stated in SI units are to be regarded as ...

Språk

Publicerad

2005-09-01

PDF · 468 SEK

Standard · ASTM ASTM D2990

Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics

1.1 These test methods cover the determination of tensile and compressive creep and creep-rupture of plastics under specified environmental conditions (see 3.1.3). 1.2 While these test methods outl...

Språk

Publicerad

2009-09-01

PDF · 611 SEK

Standard · ASTM ASTM E290

Standard Test Methods for Bend Testing of Material for Ductility

1.1 These test methods cover bend testing for ductility of materials. Included in the procedures are four conditions of constraint on the bent portion of the specimen; a guided-bend test using a ma...

Språk

Publicerad

2009-04-01

PDF · 533 SEK

Förfina din sökning genom att visa:

...som handlar om:

21304 träffar på

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Upphävd

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Upphävd

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Språk

Publicerad

Ämnesområden (0)

Branscher (0)

Syfte (0)

Material (0)