21324 träffar på

Standard · ASTM ASTM F1938

Guide for Safer Use of Movable Soccer Goals

1.1 This guide presents directions for the installation, use, and storage of full-size or nearly full-size movable soccer goals. It is expected that these guidelines can help prevent deaths and ser...

Språk

Publicerad

2009-12-15

PDF · 533 SEK
Standard · ASTM ASTM D3954

Standard Test Method for Dropping Point of Waxes

1.1 This test method covers the determination of the ASTM dropping point for waxes. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in t...

Språk

Publicerad

2004-09-01

PDF · 468 SEK
Standard · ASTM ASTM B884

Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications

1.1 This specification covers niobium-titanium alloy billets, bars, and rods, at 46 to 48 % titanium. This material is used in the manufacture of wire for superconducting applications. 1.2 The ...

Språk

Publicerad

2011-05-20

PDF · 533 SEK
Standard · ASTM ASTM E1147

Standard Test Method for Partition Coefficient (N-Octanol/Water) Estimation by Liquid Chromatography (Withdrawn 2013)

1.1 This test method describes a procedure for the estimation of the log of the octanol/water partition coefficient (log Kow) of chemicals over the range from 0 to 8.1.2 This test method uses an em...

Språk

Publicerad

2005-08-01

Upphävd

2013-03-15

PDF · 468 SEK
Standard · ASTM ASTM F2247

Standard Test Method for Metal Doors Used in Blast Resistant Applications (Equivalent Static Load Method)

1.1 This test method covers the structural performance of metal doors and frames and their restraining hardware (such as latches and hinges) used as a blast resistant barrier. This method involves ...

Språk

Publicerad

2011-05-20

PDF · 611 SEK
Standard · ASTM ASTM D4739

Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration

1.1 This test method covers a procedure for the determination of basic constituents in petroleum products and new and used lubricants. This test method resolves these constituents into groups havi...

Språk

Publicerad

2011-09-16

PDF · 533 SEK
Standard · ASTM ASTM C1265

Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications

1.1 This test method covers a laboratory procedure for quantitatively measuring the tensile strength, stiffness, and adhesion properties of insulating glass edge seals that are used in structural s...

Språk

Publicerad

2005-07-01

PDF · 533 SEK
Standard · ASTM ASTM F2694

Standard Practice for Functional and Wear Evaluation of Motion-Preserving Lumbar Total Facet Prostheses

1.1 This practice provides guidance for the functional, kinematic and wear testing of motion-preserving total facet prostheses for the lumbar spine. These implants are intended to

Språk

Publicerad

2008-02-06

PDF · 533 SEK
Standard · ASTM ASTM C1257

Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants

1.1 This test method includes two laboratory accelerated exposure procedures for predicting the effects of ultraviolet or ultraviolet/visible radiation, heat, and moisture on colo

Språk

Publicerad

2006-09-01

PDF · 468 SEK
Standard · ASTM ASTM E2348

Standard Guide for Framework for a Consensus-based Environmental Decision-making Process

1.1 This guide presents a framework for a stakeholder-focused Consensus-based Environmental Decision-making (CBED) process, which is a stakeholder-empowered, process to prioritize and select action...

Språk

Publicerad

2006-01-15

PDF · 533 SEK
Standard · ASTM ASTM D4969

Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric

1.1 This specification covers glass fabric impregnated, coated, and sintered on both sides with PTFE to a nominal thickness of 0.318 mm (0.015 in.) or less. 1.2 The PTFE-coated glass fabric is for ...

Språk

Publicerad

2007-05-09

PDF · 468 SEK
Standard · ASTM ASTM E2056

Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures

1.1 This practice relates to the multivariate calibration of spectrometers and spectrophotometers used in determining the physical and chemical characteristics of materials. A detailed description ...

Språk

Publicerad

2004-11-01

PDF · 533 SEK
Standard · ASTM ASTM D4236

Standard Practice for Labeling Art Materials for Chronic Health Hazards

1.1 This practice describes a procedure for developing precautionary labels for art materials and provides hazard and precautionary statements based upon knowledge that exists in the scientific an...

Språk

Publicerad

2005-03-01

PDF · 533 SEK
Standard · ASTM ASTM D807

Standard Practice for Assessing the Tendency of Industrial Boiler Waters to Cause Embrittlement (USBM Embrittlement Detector Method)

1.1 This practice, known as the embrittlement-detector method, covers the apparatus and procedure for determining the embrittling or nonembrittling characteristics of the water in an operating b...

Språk

Publicerad

2009-10-01

PDF · 533 SEK
Standard · ASTM ASTM D4527

Standard Test Method for Carbon BlackSolvent Extractables

1.1 This test method covers the procedure for measuring carbon black solvent extractables.1.1.1 This test method determines the total material extracted from carbon black by toluene under specified...

Språk

Publicerad

2004-07-01

PDF · 468 SEK
Standard · ASTM ASTM D4897/D4897M

Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing

1.1 This specification covers asphalt-impregnated and coated glass-fiber base sheet with mineral surfacing on the top side and coarse mineral granules on the bottom side for use as the first ply of...

Språk

Publicerad

2009-06-15

PDF · 468 SEK
Standard · ASTM ASTM C1014

Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation

1.1 This specification covers the composition and the physical properties of spray-applied mineral fiber thermal and sound absorbing insulation. This specification covers the composition...

Språk

Publicerad

2008-05-14

PDF · 468 SEK
Standard · ASTM ASTM E573

Standard Practices for Internal Reflection Spectroscopy

1.1 These practices provide general recommendations covering the various techniques commonly used in obtaining internal reflection spectra.<sup class="fo

Språk

Publicerad

2007-05-09

PDF · 611 SEK
Standard · ASTM ASTM D4771/D4771M

Standard Performance Specification for Knitted Upholstery Fabrics for Indoor Furniture

1.1 This performance specification covers the performance requirements for knitted upholstery fabrics as used in the manufacture of new indoor furniture for general domestic use. These requirement...

Språk

Publicerad

2009-09-01

PDF · 468 SEK
Standard · ASTM ASTM F1025

Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pr...

1.1 This guide specifically addresses the design and installation of full-encirclement-type band clamps for repair of gouges, punctures, or holes, and for reinforcement of polyethylene plastic pipe...

Språk

Publicerad

2006-05-01

PDF · 468 SEK
Standard · ASTM ASTM F1430/F1430M

Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments

1.1 This test method describes a procedure for acoustic emission (AE) testing of aerial personnel devices (APDs) with supplemental load handling attachments. 1.1.1 Equipment Cover

Språk

Publicerad

2010-04-01

PDF · 533 SEK
Standard · ASTM ASTM E1496

Standard Test Method for Neutron Radiographic Dimensional Measurements (Withdrawn 2012)

1.1 This test method provides a technique for extracting quantitative dimensional information on an object from its neutron radiograph. The technique is based on the identification of changes in fi...

Språk

Publicerad

2005-06-01

Upphävd

2012-06-15

PDF · 468 SEK
Standard · ASTM ASTM D2492

Standard Test Method for Forms of Sulfur in Coal

1.1&#x00a0;This test method applies to the determination of sulfate sulfur and pyritic sulfur in coal and calculates organic sulfur by difference. This test method is not applicable to co

Språk

Publicerad

2007-09-05

PDF · 533 SEK
Standard · ASTM ASTM C868

Standard Test Method for Chemical Resistance of Protective Linings

1.1&#x00a0;This test method covers a procedure for evaluating the chemical resistance of a polymer-based protective lining in immersion service. The method closely approximates the servic

Språk

Publicerad

2002-10-10

PDF · 468 SEK
Standard · ASTM ASTM D1117

Standard Guide for Evaluating Nonwoven Fabrics (Withdrawn 2009)

1.1 This guide covers procedures for testing nonwoven fabrics. The test procedures appear in the following sections: SectionAbrasion Resistance18Absorb

Språk

Publicerad

2001-09-10

Upphävd

2009-03-01

PDF · 468 SEK
Standard · ASTM ASTM D4856

Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatograph...

1.1 This ion chromatographic test method describes the determination of sulfuric acid mist in air samples collected from workplace atmospheres on a mixed cellulose ester (MCE) filter.

Språk

Publicerad

2011-10-14

PDF · 468 SEK
Standard · ASTM ASTM D5885

Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry

1.1&#x00a0;This test method covers a procedure for the determination of the oxidative induction time (OIT) of polyolefin geosynthetics using high pressure differential scanning calorimetr

Språk

Publicerad

2004-07-01

PDF · 533 SEK
Standard · ASTM ASTM F2732

Standard Practice for Determining the Temperature Ratings for Cold Weather Protective Clothing

1.1 This standard practice covers the determination of the temperature rating of cold weather protective clothing ensembles. It involves measuring the insulation value of a clothing ensemble with a...

Språk

Publicerad

2011-06-01

PDF · 533 SEK
Standard · ASTM ASTM E2327

Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis

1.1 This practice covers quality assurance issues in forensic laboratories performing seized-drug analysis including evidence handling, analytical procedures, report writing, method validation, doc...

Språk

Publicerad

2011-05-20

PDF · 533 SEK
Standard · ASTM ASTM C1619

Standard Specification for Elastomeric Seals for Joining Concrete Structures

1.1 This specification covers the physical property requirements of elastomeric seals (gaskets) used to seal the joints of precast concrete structures conforming to Specifications This specificatio...

Språk

Publicerad

2011-12-16

PDF · 468 SEK
Visa varukorgen Fortsätt handla 0
Varukorgen Stäng
Annonstext