Lays down requirements for the verification, by inspection and testing, of the compliance of the installation with the relevant requirements of other parts of IEC 60364. Criteria for testing are gi...
2001-08-17
Applies to the protection of persons and animals against electric shock. It is intended to give fundamental principles and requirements which are common to electrical installations, systems and equ...
2001-10-10
Covers earthing and equipotential bonding for information technology installations and similar equipment requiring interconnections for data exchange purposes. May also be used for other electroni...
1999-04-28
2002-06-14
Applies to temporary installations provided for: -work of new building construction; -work of repair, alteration, extension, or demolition of existing buildings; -public engineering work; -earthwor...
1999-05-31
-
2000-04-28
2003-01-28
Specifies requirements for the type test of indoor self-contained static ripple control receivers for the reception and interpretation of pulses of a single audio frequency superimposed on the volt...
1998-08-12
2004-05-17
Specifies requirements for the type test of indoor self-contained time switches that are used to control electrical loads, multi-tariff registers and maximum demand devices. Does not apply to time ...
1998-11-10
sets out a framework for the integration of standards into a system specification for electricity payment metering systems. It addresses the payment metering system application process, generic pro...
2007-02-22
Methods for acceptance inspection (100% inspection and statistical sampling inspection) and testing of newly manufactured direct connected induction type watthour meters of Class 2 which are produc...
2002-02-19
2006-12-11
2002-02-18
2006-11-21
1975-01-01
Establishes a system intended for application to all kinds of installation accessories for use in domestic and similar installations, such as socket-outlets, switches, push-buttons, pilot or signal...
1978-01-01
Applies to three-phase and/or single-phase equipment used for type and acceptance testing of electrical energy meters of Classes 0.5, 1 and 2. Has the status of a technical report.
1982-01-01
2007-03-19
This publication has the status of a Technical Report - type 2. Applies to marking for the auxiliary terminals for tariff devices of a.c. electricity meters with induction or static measuring ele...
1995-08-30
2006-02-22
Describes a 3 layer data exchange architecture used for communication with large industrial and commercial customer's metering equipment (remote reading for billing purpose). The public switched te...
Requirements are applicable to mobile or transportable units. For the purpose of this standard, the term 'unit' is intended to mean a vehicle and/or mobile or transportable structure in which all o...
2001-02-08
2009-07-30
IEC 60364-7-717:2009 is applicable to mobile or transportable units. For the purposes of this standard, the term ""unit"" refers to a vehicle and/or mobile or transportable structure in which all o...
2009-09-23
Deals with the selection and erection of wiring systems.
2001-08-20
2009-10-20
IEC 60364-5-52:2009 deals with the selection and erection of wiring systems. This third edition cancels and replaces the second edition, published in 2001, and constitutes a technical revision. The...
2009-11-18
2009-10-15
Applies to the basins of swimming pools and paddling pools and their surrounding zones where the risk of electric shock is increased by a reduction in body resistance and contact of the body with e...
1997-11-26
2010-05-12
IEC 60364-7-702:2010 applies to electrical installations of: - basins of swimming pools and paddling pools and their surrounding zones; - areas in natural waters, lakes in gravel pits and coastal a...
2010-05-19
Persons, fixed equipment, and fixed materials adjacent to electrical equipment shall be protected against harmful effects of heat developed by electrical equipment, or thermal radiation, particular...
IEC 60364-4-42:2010 applies to electrical installations with regard to measures for the protection of persons, livestock and property against: - thermal effects, combustion or degradation of materi...
2010-06-04
The rules of this part of IEC 60364 are intended to provide requirements for the safety of electrical installations in the event of voltage disturbances and electromagnetic disturbances generated...
2006-12-06
2007-08-14