Guide for performance characterization of dosimeters and dosimetry systems for use in radiation processing, ISO/ASTM 52701
Standard practice for dosimetry in radiation processing, ISO/ASTM 52628
Guide for use of radiation-sensitive indicators, ISO/ASTM 51539
Practice for blood irradiation dosimetry, ISO/ASTM 51939
Radiological protection - Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation - Part 1: General principles, ISO 13304-1
Radiological Protection - Methods for the direct measurement of radionuclides in the whole body or in organs or regions of the body, ISO
Passive neutron dosimetry systems - Part 1: Performance and test requirements for personal dosimetry, ISO 21909-1:2013
Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keV, ISO/ASTM 51818
Practice for use of the alanine-EPR dosimetry system, ISO/ASTM 51607
Practice for use of a radiochromic film dosimetry system, ISO/ASTM 51275
Practice for use of cellulose acetate dosimetry system, ISO/ASTM 51650
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 3: Calibration of area and personal dosemeters and the measurement of their response as a function of energy and angle of incidence - Amendment 1: Reference point of personal dosemeters, ISO 4037-3/Amd 1
Measurement of radioactivity - Measurement and evaluation of surface contamination - Part 3: Apparatus calibration, ISO 7503-3
Measurement of radioactivity - Measurement and evaluation of surface contamination - Part 2: Test method using wipe-test samples, ISO 7503-2
Measurement of radioactivity - Measurement and evaluation of surface contamination - Part 1: General principles, ISO 7503-1
Technical Specifications for the Connection of Mobile Equipments for Emergency Intervention on Nuclear Installation, ISO
Dosimetry for exposures to cosmic radiation in civilian aircraft — Part 3: Measurements at aviation altitudes, ISO 20785-3
Nuclear energy - Vocabulary - Part 4: Dosimetry for radiation processing, ISO 12749-4
Sampling and characterization of sites, land, buildings and infrastructures contaminated by radionuclides or chemical products for remediation purposes, ISO 18557
Nuclear energy - Waste-packages activity measurement - Part 1: Highresolution gamma spectrometry in integral mode with open geometry - Amd 1, ISO 14850-1:2004/A1:2013
Determination of Neutron Fluence and Displacements per Atom (dpa) in Reactor Vessel and Internals (SC 6),
Radiological protection - Measurements and prediction of the ambient dose rate from patient receiving radioiodine administration after thyroid ablation, ISO 18310
Nuclear energy - Guide to application of simple linear regression analysis when calibrating a system used to measure impurity elements contained in uranium solution, ISO NWIP
Nuclear energy - Packagings for transport of uranium hexafluoride (UF6), ISO 7195
Dissolution of Plutonium Dioxide-Containing Materials - Part 2 Dissolution of MOX, NWI N 563-2
Dissolution of Plutonium Dioxide-Containing Materials - Part 1 Dissolution of Plutonium Dioxide Powders, NWI N 563-1
Safe transport of radioactive materials - Leakage testing on packages, ISO 12807
Essential technical requirements for GEN IV nuclear reactors,
Sampling and monitoring releases of airborne radioactivity in the workplace of nuclear facilities, ISO 16639
Method for justification of nuclear safety fire partitioning efficiency in water cooled NPP ISO/TC 85 SC 6 - 6th Internation Seminar on Fire and Explosion Hazards, PWI - Method for justification
Radiological protection - Procedure for monitoring of the dose to the extremities and the lens of the eye, ISO 15382
Radiological protection - Medical accelerators - Radiation protection rules for installations, ISO 16645
Passive personal neutron dosemeters - Performance and test requirements, ISO 21909
Measurement of radioactivity in the environment - Air : Radon-222 - Part 11: Test method for soil gaz, ISO 11665-11
Radiological protection - Characteristics of reference pulsed radiation, ISO 18090
Nuclear Data Sets for Reactor Design Calculations, NWI N 128
Nuclear Data for the Production of Radioisotopes (SC 6 WG 1), NWI N 127
Reload Startup Physics Tests for Pressurized Water Reactors, NWI N 126
Steady-State Neutronics Methods for Power-Reactor Analysis, NWI N 125
Calculation of Decay Heat Power in Nuclear Fuel in Light-Water Reactors, N112
Nuclear energy, nuclear technologies, and radiological protection - Vocabulary - Part 3 : Nuclear fuel cycle, ISO 12749-3
Nuclear energy - Nuclear fuel technology - Theoretical activation calculation method to evaluate the radioactivity of activated waste generated at nuclear reactors, ISO 16966
Quantification of patient activity in nuclear medicine — Part 1: Determination of iodine 131 activity using the conjugate view method, ISO 16644-1
Nuclear Energy - Fuel Technology - Re-sintering test for UO2, (U,Gd)O2 and (U,Pu)O2 pellets, ISO 15646
Nuclear Energy - Fuel Technology - (U,Pu)O2 Powders and sintered pellets - Determination of chlorine and fluorine, ISO 21613
Nuclear Energy - Nuclear Fuel Technology - Guidelines for dissolution prior analysis of liquid effluents, solid waste and embedding matrices, ISO 17303
Nuclear energy, nuclear technologies, and radiological protection - Vocabulary - Part 2: Radiological protection, ISO 12749-2
Physical specification of the in vitro calibration for biological radiation dosimetry with cytogenetic endpoints (Acronym: "BioDosCal"), ISO 17136
Measurement of radioactivity in the environment - Air - Part 10: Radon-222: determination of the radon diffusion coefficient in waterproof materials using radon activity concentration measurement, ISO 11665-10
Measurement of radioactivity in the environment - Air - Radon-220: Integrated measurement methods for the determination of the average thoron and thoron decay products activity concentration using passive sampling and delayed analysis, ISO 16641
Radiological protection — Performance criteria for laboratories using the cytokinesis-block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry., ISO 17099
Nuclear energy - Nuclear fuel technology - Direct activation calculation method to evaluate the radioactivity of activated radioactive waste generated at nuclear power plants , NWI N 501
Radiological Protection - Monitoring and internal dosimetry for specific materials - Part 1: Uranium, ISO 16638-1
Radiological protection - Monitoring and internal dosimetry for staff exposed to medical radionuclides, ISO 16637
Radiation protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics, ISO 19238
Measurement of radioactivity in the environment — Air: radon-222 - Part 9: Method for determining exhalation rate of dense building materials, ISO 11665-9
Nuclear fuel technology - Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography - Part 2: Samples containing plutonium and uranium in the nanogram range and below, ISO 15366-2
Nuclear fuel technology - Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography -Part 1: Samples containing plutonium in the microgram range and uranium in the milligram range, ISO 15366-1
Nuclear energy - Determination of total hydrogen content in PuO2 and UO2 powders and UO2 , (U,Gd)O2 and U,Pu)O2 sintered pellets - Inert gas extraction and conductivity detection method, ISO 15651
Nuclear energy - Determination of nitrogen content in UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets - Inert gas extraction and conductivity detection method, ISO 12799
Nuclear criticality safety — Estimation of the number of fissions of a postulated criticality accident, ISO 16117
Radiological protection — Recommendations for dealing with discrepancies between personal dosimeter systems used in parallel, ISO 15690
Measurement of radioactivity in the environment - Soil - Part 7: In situ measurement of gamma-emitting radionuclides, ISO 18589-7
Radiological protection - Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation, ISO 13304
Technical specification guide for decay heat computation codes in light water reactors, ISO 10864
Radiation Protection - Procedure of dosimetry with thermoluminescence detectors for photon and electron radiations in radiotherapy, ISO 28057
Nuclear fuel technology - Determination of plutonium in pure plutonium nitrate solutions - Gravimetric method, ISO 8425
Nuclear fuel technology - Determination of plutonium content in plutonium dioxide of nuclear grade quality - Gravimetric method, ISO 8300
Guide for Dosimetry In Radiation Processing of Fluidized Beds and Fluid Streams , ISO/ASTM 52381
Practice for Use of a LiF Photo-Fluorescent Film Dosimetry System , ISO/ASTM 52304
Guide for Absorbed-Dose Mapping in Radiation Processing Facilities , ISO/ASTM 52303
Guide for Selection and Use of Mathematical Methods for Calculating Absorbed Dose in Radiation Processing Applications , ISO/ASTM 52232
Practice for Using the Fricke Reference-Standard Dosimetry System , ISO/ASTM 51026
Nuclear energy - Fuel technology - Standard guide for gamma-ray spectrometric measurements of radioactive waste packages using HPGE-detectors (ISO 14850-2), ISO 14850-2